A comprehensive review of spatiotemporal pattern formation in systems driven away from equilibrium is presented, with emphasis on comparisons between theory and quantitative experiments. Examples include patterns in hydrodynamic systems such as thermal convection in pure fluids and binary mixtures, Taylor-Couette flow, parametric-wave instabilities, as well as patterns in solidification fronts, nonlinear optics, oscillatory chemical reactions and excitable biological media. The theoretical starting point is usually a set of deterministic equations of motion, typically in the form of nonlinear partial differential equations. These are sometimes supplemented by stochastic terms representing thermal or instrumental noise, but for macroscopic systems and carefully designed experiments the stochastic forces are often negligible. An aim of theory is to describe solutions of the deterministic equations that are likely to be reached starting from typical initial conditions and to persist at long times. A unified description is developed, based on the linear instabilities of a homogeneous state, which leads naturally to a classification of patterns in terms of the characteristic wave vector q0 and frequency ω0 of the instability. Type Is systems (ω0=0, q0≠0) are stationary in time and periodic in space; type IIIo systems (ω0≠0, q0=0) are periodic in time and uniform in space; and type Io systems (ω0≠0, q0≠0) are periodic in both space and time. Near a continuous (or supercritical) instability, the dynamics may be accurately described via "amplitude equations," whose form is universal for each type of instability. The specifics of each system enter only through the nonuniversal coefficients. Far from the instability threshold a different universal description known as the "phase equation" may be derived, but it is restricted to slow distortions of an ideal pattern. For many systems appropriate starting equations are either not known or too complicated to analyze conveniently. It is thus useful to introduce phenomenological order-parameter models, which lead to the correct amplitude equations near threshold, and which may be solved analytically or numerically in the nonlinear regime away from the instability. The above theoretical methods are useful in analyzing "real pattern effects" such as the influence of external boundaries, or the formation and dynamics of defects in ideal structures. An important element in nonequilibrium systems is the appearance of deterministic chaos. A greal deal is known about systems with a small number of degrees of freedom displaying "temporal chaos," where the structure of the phase space can be analyzed in detail. For spatially extended systems with many degrees of freedom, on the other hand, one is dealing with spatiotemporal chaos and appropriate methods of analysis need to be developed. In addition to the general features of nonequilibrium pattern formation discussed above, detailed reviews of theoretical and experimental work on many specific systems are presented. These include Rayleigh-Benard convection in a pure fluid, convection in binary-fluid mixtures, electrohydrodynamic convection in nematic liquid crystals, Taylor-Couette flow between rotating cylinders, parametric surface waves, patterns in certain open flow systems, oscillatory chemical reactions, static and dynamic patterns in biological media, crystallization fronts, and patterns in nonlinear optics. A concluding section summarizes what has and has not been accomplished, and attempts to assess the prospects for the future.

/pdf/pattern-formation-outside-of-equilibrium-1601b9znum.pdf

Pattern formation outside of equilibrium

Solid lipid nanoparticles: Production, characterization and applications

Single-molecule force spectroscopy has emerged as a powerful tool to investigate the forces and motions associated with biological molecules and enzymatic activity. The most common force spectroscopy techniques are optical tweezers, magnetic tweezers and atomic force microscopy. Here we describe these techniques and illustrate them with examples highlighting current capabilities and limitations.

Single-molecule force spectroscopy: optical tweezers, magnetic tweezers and atomic force microscopy

IN two previous notes1, Prof. Max Born and I have shown that one can obtain a theory of superconductivity by taking account of the fact that the interaction of the electrons with the ionic lattice is appreciable only near the boundaries of Brillouin zones, and particularly strong near the corners of these. This leads to the criterion that the metal should be superconductive if a set of corners of a Brillouin zone is lying very near the Fermi surface, considered as a sphere, which limits the region in the momentum space completely filled with electrons.

On the theory of superconductivity

The goal of this survey is to review recent developments in the hydro­ dynamic stability theory of spatially developing flows pertaining to absolute/convective and local/global instability concepts. We wish to dem­ onstrate how these notions can be used effectively to obtain a qualitative and quantitative description of the spatio-temporal dynamics of open shear flows, such as mixing layers, jets, wakes, boundary layers, plane Poiseuille flow, etc. In this review, we only consider open flows where fluid particles do not remain within the physical domain of interest but are advected through downstream flow boundaries. Thus, for the most part, flows in "boxes" (Rayleigh-Benard convection in finite-size cells, Taylor-Couette flow between concentric rotating cylinders, etc.) are not discussed. Further­ more, the implications of local/global and absolute/convective instability concepts for geophysical flows are only alluded to briefly. In many of the flows of interest here, the mean-velocity profile is non-

/pdf/local-and-global-instabilities-in-spatially-developing-flows-ja4x14nrk6.pdf

Local and global instabilities in spatially developing flows

One or more homogenizing elements are employed in a flow through, multi-detector optical measurement system. The homogenizing elements correct for problems common to multi-detector flow-through systems such as peak tailing and non-uniform sample profile within the measurement cell. The homogenizing elements include coiled inlet tubing, a flow distributor near the inlet of the cell, and a flow distributor at the outlet of the cell. This homogenization of the sample mimics plug flow within the measurement cell and enables each detector to view the same sample composition in each individual corresponding viewed sample volume. This system is particularly beneficial when performing multiangle light scattering (MALS) measurements of narrow chromatographic peaks such as those produced by ultra-high pressure liquid chromatography (UHPLC).

Apparatus to measure multiple signals from a liquid sample

The effect of even dilute silica networks on the critical phenomena of binary liquid mixtures is profound. The network preferentially adsorbs one component, preventing a portion of the mixture from participating in critical fluctuations. Fluctuations in the remaining mixture are found to decay with a non-exponential correlation function near the consolute point. A correlation function consisting of the sum of an exponential decay and a non-exponential term of either an activated or stretched exponential form fits the data well. In the presence of the silica network, the mixtures are observed to phase separate near the critical temperature of the pure system, but while still in the one-phase region of the pure system.

Consolute Critical Phenomena in Dilute Silica Gel

The results of using nonlinear least‐mean‐squares fitting procedures to compensate passive electrical filters for the effects of frequency‐dependent losses in the inductors by changes in the other components are reported. This technique, when applied to third‐ and fifth‐order low‐pass Chebysheff filters, resulted in actual transfer functions which were essentially identical to the ideal transfer functions. Filters having cutoff frequencies ranging from 300 Hz to 3 MHz were constructed and tested.

Use of nonlinear least mean squares fitting to achieve compensated electrical filters

On the time evolution of light scattering intensity from binary liquids quenched near and above the critical point

A fluid or fluid mixture, subjected to a vertical temperature and/or concentration gradient in a gravitational field, exhibits greatly enhanced light scattering at small angles. This effect is caused by coupling between the vertical velocity fluctuations due to thermal energy and the vertically varying refractive index. Physically, small upward or downward moving regions will be displaced into fluid having a refractive index different from that of the moving region, thus giving rise to the enhanced scattering. The scattered intensity is predicted to vary with scattering wave vector q, as q(sup -4), for sufficiently large q, but the divergence is quenched by gravity at small q. In the absence of gravity, the long wavelength fluctuations responsible for the enhanced scattering are predicted to grow until limited by the sample dimensions. It is thus of interest to measure the mean-squared amplitude of such fluctuations in the microgravity environment for comparison with existing theory and ground based measurements. The relevant wave vectors are extremely small, making traditional low-angle light scattering difficult or impossible because of stray elastically scattered light generated by optical surfaces. An alternative technique is offered by the shadowgraph method, which is normally used to visualize fluid flows, but which can also serve as a quantitative tool to measure fluctuations. A somewhat novel shadowgraph apparatus and the necessary data analysis methods will be described. The apparatus uses a spatially coherent, but temporally incoherent, light source consisting of a super-luminescent diode coupled to a single-mode optical fiber in order to achieve extremely high spatial resolution, while avoiding effects caused by interference of light reflected from the various optical surfaces that are present when using laser sources. Results obtained for a critical mixture of aniline and cyclohexane subjected to a vertical temperature gradient will be presented. The sample was confined between two horizontal parallel sapphire plates with a vertical spacing of 1 mm. The temperatures of the sapphire plates were controlled by independent circulating water loops that used Peltier devices to add or remove heat from the room air as required. For a mixture with a temperature gradient, two effects are involved in generating the vertical refractive index gradient, namely thermal expansion and the Soret effect, which generates a concentration gradient in response to the applied temperature gradient. For the aniline/cyclohexane system, the denser component (aniline) migrates toward the colder surface. Consequently, when heating from above, both effects result in the sample density decreasing with altitude and are stabilizing in the sense that no convective motion occurs regardless of the magnitude of the applied temperature gradient. The Soret effect is strong near a binary liquid critical point, and thus the dominant effect is due to the induced concentration gradient. The results clearly show the divergence at low q and the predicted gravitational quenching. Results obtained for different applied temperature gradients at varying temperature differences from the critical temperature, clearly demonstrate the predicted divergence of the thermal diffusion ratio. Thus, the more closely the critical point is approached, the smaller becomes the temperature gradient required to generate the same signal. Two different methods have been used to generate pure concentration gradients. In the first, a sample cell was filled with a single fluid, ethylene glycol, and a denser miscible fluid, water, was added from below thus establishing a sharp interface to begin the experiment. As time went on the two fluids diffused into each other, and large amplitude fluctuations were clearly observed at low q. The effects of gravitational quenching were also evident. In the second method, the aniline/cyclohexane sample was used, and after applying a vertical temperature gradient for several hours, the top and bottom temperatures were set equal and the thermal gradient died on a time scale of seconds, leaving the Soret induced concentration gradient in place. Again, large-scale fluctuations were observed and died away slowly in amplitude as diffusion destroyed the initial concentration gradient.

/pdf/shadowgraph-study-of-gradient-driven-fluctuations-46gbov4rfm.pdf

David S. Cannell

Papers

Apparatus to measure multiple signals from a liquid sample

Consolute Critical Phenomena in Dilute Silica Gel

Use of nonlinear least mean squares fitting to achieve compensated electrical filters

On the time evolution of light scattering intensity from binary liquids quenched near and above the critical point

Shadowgraph Study of Gradient Driven Fluctuations