Since the discovery of mechanically exfoliated graphene in 2004, research on ultrathin two-dimensional (2D) nanomaterials has grown exponentially in the fields of condensed matter physics, material science, chemistry, and nanotechnology. Highlighting their compelling physical, chemical, electronic, and optical properties, as well as their various potential applications, in this Review, we summarize the state-of-art progress on the ultrathin 2D nanomaterials with a particular emphasis on their recent advances. First, we introduce the unique advances on ultrathin 2D nanomaterials, followed by the description of their composition and crystal structures. The assortments of their synthetic methods are then summarized, including insights on their advantages and limitations, alongside some recommendations on suitable characterization techniques. We also discuss in detail the utilization of these ultrathin 2D nanomaterials for wide ranges of potential applications among the electronics/optoelectronics, electrocat...

Recent Advances in Ultrathin Two-Dimensional Nanomaterials

To date, copper is the only heterogeneous catalyst that has shown a propensity to produce valuable hydrocarbons and alcohols, such as ethylene and ethanol, from electrochemical CO2 reduction (CO2R). There are variety of factors that impact CO2R activity and selectivity, including the catalyst surface structure, morphology, composition, the choice of electrolyte ions and pH, and the electrochemical cell design. Many of these factors are often intertwined, which can complicate catalyst discovery and design efforts. Here we take a broad and historical view of these different aspects and their complex interplay in CO2R catalysis on Cu, with the purpose of providing new insights, critical evaluations, and guidance to the field with regard to research directions and best practices. First, we describe the various experimental probes and complementary theoretical methods that have been used to discern the mechanisms by which products are formed, and next we present our current understanding of the complex reaction networks for CO2R on Cu. We then analyze two key methods that have been used in attempts to alter the activity and selectivity of Cu: nanostructuring and the formation of bimetallic electrodes. Finally, we offer some perspectives on the future outlook for electrochemical CO2R.

/pdf/progress-and-perspectives-of-electrochemical-co2-reduction-hut0der0e7.pdf

Progress and Perspectives of Electrochemical CO2 Reduction on Copper in Aqueous Electrolyte

Liming Dai,*,†,‡ Yuhua Xue,†,‡ Liangti Qu,* Hyun-Jung Choi, and Jong-Beom Baek* †Center of Advanced Science and Engineering for Carbon (Case4Carbon), Department of Macromolecular Science and Engineering, Case Western Reserve University, 10900 Euclid Avenue, Cleveland, Ohio 44106, United States Key Laboratory of Cluster Science, Ministry of Education of China, Beijing Key Laboratory of Photoelectronic/Electrophotonic Conversion Materials, Department of Chemistry, School of Science, Beijing Institute of Technology, Beijing 100081, People’s Republic of China School of Energy and Chemical Engineering/Center for Dimension-Controllable Covalent Organic Frameworks, Ulsan National Institute of Science and Technology (UNIST), 100 Banyeon, Ulsan, 689-798, South Korea

Metal-free catalysts for oxygen reduction reaction.

Electroreduction of CO2 into useful fuels, especially if driven by renewable energy, represents a potentially 'clean' strategy for replacing fossil feedstocks and dealing with increasing CO2 emissions and their adverse effects on climate. The critical bottleneck lies in activating CO2 into the CO2(•-) radical anion or other intermediates that can be converted further, as the activation usually requires impractically high overpotentials. Recently, electrocatalysts based on oxide-derived metal nanostructures have been shown to enable CO2 reduction at low overpotentials. However, it remains unclear how the electrocatalytic activity of these metals is influenced by their native oxides, mainly because microstructural features such as interfaces and defects influence CO2 reduction activity yet are difficult to control. To evaluate the role of the two different catalytic sites, here we fabricate two kinds of four-atom-thick layers: pure cobalt metal, and co-existing domains of cobalt metal and cobalt oxide. Cobalt mainly produces formate (HCOO(-)) during CO2 electroreduction; we find that surface cobalt atoms of the atomically thin layers have higher intrinsic activity and selectivity towards formate production, at lower overpotentials, than do surface cobalt atoms on bulk samples. Partial oxidation of the atomic layers further increases their intrinsic activity, allowing us to realize stable current densities of about 10 milliamperes per square centimetre over 40 hours, with approximately 90 per cent formate selectivity at an overpotential of only 0.24 volts, which outperforms previously reported metal or metal oxide electrodes evaluated under comparable conditions. The correct morphology and oxidation state can thus transform a material from one considered nearly non-catalytic for the CO2 electroreduction reaction into an active catalyst. These findings point to new opportunities for manipulating and improving the CO2 electroreduction properties of metal systems, especially once the influence of both the atomic-scale structure and the presence of oxide are mechanistically better understood.

Partially oxidized atomic cobalt layers for carbon dioxide electroreduction to liquid fuel

Photoreduction of CO2 into sustainable and green solar fuels is generally believed to be an appealing solution to simultaneously overcome both environmental problems and energy crisis. The low selectivity of challenging multi-electron CO2 photoreduction reactions makes it one of the holy grails in heterogeneous photocatalysis. This Review highlights the important roles of cocatalysts in selective photocatalytic CO2 reduction into solar fuels using semiconductor catalysts. A special emphasis in this review is placed on the key role, design considerations and modification strategies of cocatalysts for CO2 photoreduction. Various cocatalysts, such as the biomimetic, metal-based, metal-free, and multifunctional ones, and their selectivity for CO2 photoreduction are summarized and discussed, along with the recent advances in this area. This Review provides useful information for the design of highly selective cocatalysts for photo(electro)reduction and electroreduction of CO2 and complements the existing reviews on various semiconductor photocatalysts.

Cocatalysts for Selective Photoreduction of CO2 into Solar Fuels.

Electrochemical reduction is one process to produce higher value chemicals from carbon dioxide, and it is typically catalysed by noble metals. Here, the authors demonstrate that molybdenum disulphide is also capable of efficiently catalysing the reaction in the presence of an ionic liquid.

/pdf/robust-carbon-dioxide-reduction-on-molybdenum-disulphide-4kgwg0ux5z.pdf

Robust carbon dioxide reduction on molybdenum disulphide edges

The efficient catalysis of the electrochemical reduction of carbon dioxide is an important industrial process, usually performed by noble metal catalysts. Here the authors report a metal-free carbon nanofibre-based catalyst operating with a negligible overpotential, high current density and long-term stability.

/pdf/renewable-and-metal-free-carbon-nanofibre-catalysts-for-580q7up56m.pdf

Renewable and metal-free carbon nanofibre catalysts for carbon dioxide reduction

The anthropogenic emissions of carbon dioxide (CO2) and other greenhouse gases (GHGs) into the atmosphere have been exponentially increasing since the industrial revolution, and have been recently recognized as the main cause of ongoing climate change. Predictions of possible future scenarios suggest that various routes for GHG emissions reduction must be undertaken, including progressive shifts from traditional fossil fuels to green, renewable, carbon-free energy generation technologies. Additionally, carbon-capture systems would represent a significant tool for stabilizing current atmospheric CO2 concentration. Captured CO2 can be subsequently recycled (e.g. for enhanced oil recovery) or converted into high-energy density chemicals, outlining a potential flexible approach for storing excess energy produced by renewable energy sources. Electrochemical reduction of CO2 has been recently recognized as a strong candidate to perform CO2-to-fuel conversion at favorable energy efficiencies. Nonetheless, the development of a cost-effective catalytic system that would perform the conversion at a low-overpotential, high current efficiency (faradaic efficiency), and high conversion rate (current density), remains a challenge. This paper proposes a low-cost co-catalytic system which exhibits exceptional performance - i.e. negligible overpotential, nearly 100% current efficiency, and the greatest current density reported thus far - for electrochemical CO2 reduction. The integration of the system in a microfluidic-type reactor - powered by a solar panel - provides promising results for effective continuous CO2 conversion to syngas fuel.

Davide Pisasale

Papers

Robust carbon dioxide reduction on molybdenum disulphide edges

Renewable and metal-free carbon nanofibre catalysts for carbon dioxide reduction

Solar Energy Driven Microfluidic Reactor for Continuous Production of Syngas by CO2 Reduction