Mechanism and modeling of nitrogen chemistry in combustion

Effect of biodiesel fuels on diesel engine emissions

A phenomenological description, or “conceptual model,” of how direct-injection (DI) diesel combustion occurs has been derived from laser-sheet imaging and other recent optical data. To provide background, the most relevant of the recent imaging data of the author and co-workers are presented and discussed, as are the relationships between the various imaging measurements. Where appropriate, other supporting data from the literature is also discussed. Then, this combined information is summarized in a series of idealized schematics that depict the combustion process for a typical, modern-diesel-engine condition. The schematics incorporate virtually all of the information provided by our recent imaging data including: liquidand vapor-fuel zones, fuel/air mixing, autoignition, reaction zones, and soot distributions. By combining all these elements, the schematics show the evolution of a reacting diesel fuel jet from the start of fuel injection up through the first part of the mixing-controlled burn (i.e. until the end of fuel injection). In addition, for a “developed” reacting diesel fuel jet during the mixingcontrolled burn, the schematics explain the sequence of events that occurs as fuel moves from the injector downstream through the mixing, combustion, and emissions-formation processes. The conceptual model depicted in these schematics also gives insight into the most likely mechanisms for soot formation and destruction and NO formation during the portion of the DI diesel combustion event discussed.

A Conceptual Model of DI Diesel Combustion Based on Laser-Sheet Imaging*

Modeling spray atomization with the kelvin-helmholtz/rayleigh-taylor hybrid model

Ambient gas density and fuel vaporization effects on the penetration and dispersion of diesel sprays were examined over a gas density range spanning nearly two order of magnitude. This range included gas densities more than a factor of two higher than top-dead-center conditions in current technology heavy-duty diesel engines. The results show that ambient gas density has a significantly larger effect on spray penetration and a smaller effect on spray dispersion than has been previously reported. The increased dependence of penetration on gas density is shown to be the result of gas density effects on dispersion. In addition, the results show that vaporization decreases penetration and dispersion by as much as 20% relative to non-vaporizing sprays; however, the effects of vaporization decrease with increasing gas density. Characteristic penetration time and length scales are presented that include a dispersion term that accounts for the increased dependence of penetration on ambient density. These penetration time and length scales collapse the penetration data obtained over the entire range of conditions examined in the experiment into two distinct non-dimensional penetration curves: one for the non-vaporizing conditions and one for the vaporizing conditions. Comparison of the two nondimensional penetration curves to a theoretical penetration correlation for non-vaporizing sprays helped isolate and explain the effects of droplets and vaporization on penetration. The theoretical penetration correlation was derived using the penetration time and length scales and simple model for a non-vaporizing spray that has been previously presented in the literature. The correlation is in good agreement with the non-vaporizing data from this experiment and other commonly quoted penetration data sets. It also provides a potential explanation for much of scatter in the penetration predicted by various correlations in the literature.

/pdf/effects-of-gas-density-and-vaporization-on-penetration-and-53r9byyd3t.pdf

Dennis L. Siebers

Papers

Effects of Gas Density and Vaporization on Penetration and Dispersion of Diesel Sprays

Scaling Liquid-Phase Fuel Penetration in Diesel Sprays Based on Mixing-Limited Vaporization

Liquid-Phase Fuel Penetration in Diesel Sprays

Soot in diesel fuel jets: effects of ambient temperature, ambient density, and injection pressure

Flame Lift-Off on Direct-Injection Diesel Sprays Under Quiescent Conditions