Dye-sensitized solar cells (DSCs) offer the possibilities to design solar cells with a large flexibility in shape, color, and transparency. DSC research groups have been established around the worl ...

/pdf/dye-sensitized-solar-cells-50b0w2bhsr.pdf

Dye-Sensitized Solar Cells

The need to develop inexpensive renewable energy sources stimulates scientific research for efficient, low-cost photovoltaic devices.1 The organic, polymer-based photovoltaic elements have introduced at least the potential of obtaining cheap and easy methods to produce energy from light.2 The possibility of chemically manipulating the material properties of polymers (plastics) combined with a variety of easy and cheap processing techniques has made polymer-based materials present in almost every aspect of modern society.3 Organic semiconductors have several advantages: (a) lowcost synthesis, and (b) easy manufacture of thin film devices by vacuum evaporation/sublimation or solution cast or printing technologies. Furthermore, organic semiconductor thin films may show high absorption coefficients4 exceeding 105 cm-1, which makes them good chromophores for optoelectronic applications. The electronic band gap of organic semiconductors can be engineered by chemical synthesis for simple color changing of light emitting diodes (LEDs).5 Charge carrier mobilities as high as 10 cm2/V‚s6 made them competitive with amorphous silicon.7 This review is organized as follows. In the first part, we will give a general introduction to the materials, production techniques, working principles, critical parameters, and stability of the organic solar cells. In the second part, we will focus on conjugated polymer/fullerene bulk heterojunction solar cells, mainly on polyphenylenevinylene (PPV) derivatives/(1-(3-methoxycarbonyl) propyl-1-phenyl[6,6]C61) (PCBM) fullerene derivatives and poly(3-hexylthiophene) (P3HT)/PCBM systems. In the third part, we will discuss the alternative approaches such as polymer/polymer solar cells and organic/inorganic hybrid solar cells. In the fourth part, we will suggest possible routes for further improvements and finish with some conclusions. The different papers mentioned in the text have been chosen for didactical purposes and cannot reflect the chronology of the research field nor have a claim of completeness. The further interested reader is referred to the vast amount of quality papers published in this field during the past decade.

Conjugated polymer-based organic solar cells

-phenylenevinylene)s L4. Fluorene-Based Conjugated Polymers L4.1. Fluorene-Based Copolymers ContainingElectron-Rich MoietiesM4.2. Fluorene-Based Copolymers ContainingElectron-Deﬁcient MoietiesN4.3. Fluorene-Based Copolymers ContainingPhosphorescent ComplexesQ5. Carbazole-Based Conjugated Polymers R5.1. Poly(2,7-carbazole)-Based Polymers R5.2. Indolo[3,2-

https://ir.nctu.edu.tw:443/bitstream/11536/6508/1/000271856900020.pdf

Synthesis of Conjugated Polymers for Organic Solar Cell Applications

2.2. MOFs with Metal Active Sites 4614 2.2.1. Early Studies 4614 2.2.2. Hydrogenation Reactions 4618 2.2.3. Oxidation of Organic Substrates 4620 2.2.4. CO Oxidation to CO2 4626 2.2.5. Phototocatalysis by MOFs 4627 2.2.6. Carbonyl Cyanosilylation 4630 2.2.7. Hydrodesulfurization 4631 2.2.8. Other Reactions 4632 2.3. MOFs with Reactive Functional Groups 4634 2.4. MOFs as Host Matrices or Nanometric Reaction Cavities 4636

Engineering Metal Organic Frameworks for Heterogeneous Catalysis

Fabrication and processing of polymer solar cells: A review of printing and coating techniques

Organic Solar Cells

The singlet oxygen luminescence method and the photochemical methods using 1,3-diphenylisobenzofuran (DPBF) or bilirubin ditaurate (BDT) as chemical quenchers were employed to determine the single oxygen quantum yields (ΦΔ) of different phthalocyanines and tris(2,2″-bipyridyl)ruthenium(II) dichloride in dimethylformamide (DMF) or aqueous micellar solution of 0.1 M CTAC (cetyltrimethylammonium chloride). Additionally, a perylenetetracarboxylic acid diimide derivative was examined in DMF. In a series of tetrasulfonated phthalocyanines (PTS) the following order was found: ZnPTS > GaPTS > AlPTS ≈ H2PTS > CoPTS. In general, the singlet oxygen quantum yields are higher in DMF than in 0.1 M CTAC/H2O. The results obtained with the photochemical systems are comparable with those obtained by the photophysical method. The photochemical DPBF method results in absolute values of ΦΔ. However, in micellar solution, chain reactions occur when DPBF is used as chemical quencher in the photo-oxidative process. This problem ...

Singlet Oxygen Quantum Yields of Different Photosensitizers in Polar Solvents and Micellar Solutions

Chromophores in porous silicas and minerals: preparation and optical properties

Electrodeposition of inorganic compound thin films in the presence of certain organic molecules results in self-assembly of various hybrid thin films with new properties. Examples of new discoveries by the authors are reviewed, taking cathodic formation of a ZnO/dye hybrid as the leading example. Hybridization of eosinY leads to the formation of highly oriented porous crystalline ZnO as the consequence of dye loading. The hybrid formation is a highly complicated process involving complex chemistry of many molecular and ionic constituents. However, electrochemical analyses of the relevant phenomena indicate the possibility of reaching a comprehensive understanding of the mechanism, giving us the chance to further develop them into industrial technologies. The porous crystals are ideal for photoelectrodes in dye-sensitized solar cells. As the process also permits the use of non-heat-resistant substrates, the technology can be applied for the development of colorful and light-weight plastic solar cells.

Electrodeposition of Inorganic/Organic Hybrid Thin Films

4,5-Dichloro-1,2-dicyanobenzene (5) was prepared in an overall yield of 49 % from 4,5-dichloro-1,2-benzenedicarboxylic acid. The reactions of 5 with phenols, thiophenol and 1-propanethiol led in a nucleophilic displacement reaction to the 4,5-bis(aryloxy)-, 4,5-bis(phenylthio)- and 4,5-bis(propylthio)-1,2-dicyanobenzenes 6 which were converted in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene in high yields to octasubstituted phthalocyanines (tetrabenzoporphyrazines).

Dieter Wöhrle

Papers

Organic Solar Cells

Singlet Oxygen Quantum Yields of Different Photosensitizers in Polar Solvents and Micellar Solutions

Chromophores in porous silicas and minerals: preparation and optical properties

Electrodeposition of Inorganic/Organic Hybrid Thin Films

A Simple Synthesis of 4,5-Disubstituted 1,2-Dicyanobenzenes and 2,3,9,10,16,17,23,24-Octasubstituted Phthalocyanines