Polymer/layered silicate nanocomposites: a review from preparation to processing

2.1. Solvents 4307 2.1.1. Propylene Carbonate (PC) 4308 2.1.2. Ethers 4308 2.1.3. Ethylene Carbonate (EC) 4309 2.1.4. Linear Dialkyl Carbonates 4310 2.2. Lithium Salts 4310 2.2.1. Lithium Perchlorate (LiClO4) 4311 2.2.2. Lithium Hexafluoroarsenate (LiAsF6) 4312 2.2.3. Lithium Tetrafluoroborate (LiBF4) 4312 2.2.4. Lithium Trifluoromethanesulfonate (LiTf) 4312 2.2.5. Lithium Bis(trifluoromethanesulfonyl)imide (LiIm) and Its Derivatives 4313

/pdf/nonaqueous-liquid-electrolytes-for-lithium-based-uxm5ffbi18.pdf

Nonaqueous liquid electrolytes for lithium-based rechargeable batteries.

Electrolytes and interphases in Li-ion batteries and beyond.

Fuel cells have the potential to become an important energy conversion technology. Research efforts directed toward the widespread commercialization of fuel cells have accelerated in light of ongoing efforts to develop a hydrogen-based energy economy to reduce dependence on foreign oil and decrease pollution. Proton exchange membrane (also termed “polymer electrolyte membrane”) (PEM) fuel cells employing a solid polymer electrolyte to separate the fuel from the oxidant were first deployed in the Gemini space program in the early 1960s using cells that were extremely expensive and had short lifetimes due to the oxidative degradation of their sulfonated polystyrene-divinylbenzene copolymer membranes. These cells were considered too costly and short-lived for real-world applications. The commercialization of Nafion by DuPont in the late 1960s helped to demonstrate the potential interest in terrestrial applications for fuel cells, although its major focus was in chloroalkali processes. PEM fuel cells are being developed for three main applications: automotive, stationary, and portable power. Each of these applications has its unique operating conditions and material requirements. Common themes critical to all high performance proton exchange membranes include (1) high protonic conductivity, (2) low electronic conductivity, (3) low permeability to fuel and oxidant, (4) low water transport through diffusion and electro-osmosis, (5) oxidative and hydrolytic stability, (6) good mechanical properties in both the dry and hydrated states, (7) cost, and (8) capability for fabrication into membrane electrode assemblies (MEAs). Nearly all existing membrane materials for PEM fuel cells rely on absorbed water and its interaction with acid groups to produce protonic conductivity. Due to the large fraction of absorbed water in the membrane, both mechanical properties and water transport become key issues. Devising systems that can conduct protons with little or no water is perhaps the greatest challenge for new membrane materials. Specifically, for automotive applications the U.S. Department of Energy has currently established a guideline of 120 °C and 50% relative humidity as target operating conditions, and a goal of 0.1 S/cm for the protonic conductivity of the membrane. New membranes that have significantly reduced methanol permeability and water transport (through diffusion and electro-osmotic drag) are required for portable power oriented direct methanol fuel cells (DMFCs), where a liquid methanol fuel highly diluted in water is used at generally <90 °C as the source of protons. Unreacted methanol at the anode can diffuse through the membrane and react at the cathode, lowering the voltage efficiency of the cell and reducing the system’s fuel efficiency. The methanol is usually delivered to the anode as a dilute, for example, 1 M (or less), solution (3.2 wt %), and relatively thick Nafion 117 (1100 EW, 7 mil ∼ 178 μm thick) is used to reduce methanol crossover. The dilute methanol feed increases the system’s complexity and reduces the energy density of the fuel, while the thick Nafion membrane increases the resistive losses of the cell, especially when compared to the thinner membranes that are used in hydrogen/air systems. The presence of excessive amounts of water at the cathode through diffusion and electro-osmosis * To whom correspondence should be addressed. E-mail: jmcgrath@vt.edu. † Sandia National Laboratory. ‡ Case Western Reserve University. § Los Alamos National Laboratory. | Virginia Polytechnic Institute and State University. 4587 Chem. Rev. 2004, 104, 4587−4612

Alternative Polymer Systems for Proton Exchange Membranes (PEMs)

Molecular self-assembly is the spontaneous association of molecules under equilibrium conditions into stable, structurally well-defined aggregates joined by noncovalent bonds. Molecular self-assembly is ubiquitous in biological systems and underlies the formation of a wide variety of complex biological structures. Understanding self-assembly and the associated noncovalent interactions that connect complementary interacting molecular surfaces in biological aggregates is a central concern in structural biochemistry. Self-assembly is also emerging as a new strategy in chemical synthesis, with the potential of generating nonbiological structures with dimensions of 1 to 10(2) nanometers (with molecular weights of 10(4) to 10(10) daltons). Structures in the upper part of this range of sizes are presently inaccessible through chemical synthesis, and the ability to prepare them would open a route to structures comparable in size (and perhaps complementary in function) to those that can be prepared by microlithography and other techniques of microfabrication.

Molecular self-assembly and nanochemistry: A chemical strategy for the synthesis of nanostructures

Ion Transport in Solvent-Free Polymers

: The phosphazene polymer (NP(OC2H40C2H4OCH3)n, MEEP, was synthesized and amorphous solvent-free salt complexes were performed with LiSo3CF3, NaSO3CF3, Sr(SO3CF3)2, and AgSO3CF3. A material with the composition (LiSO3CF3)0.25. MEEP has a conductivity of .00008 ohm/cm at 30 C, which is much higher than corresponding poly (ethylene oxide) complexes. The phosphazene electrolytes are promising materials for ambient-temperature high energy density batteries.

Duward F. Shriver

Papers

Ion Transport in Solvent-Free Polymers

Polyphosphazene solid electrolytes

Vibrational spectroscopy and structure of polymer electrolytes, poly(ethylene oxide) complexes of alkali metal salts

Vibrational study of the trifluoromethanesulfonate anion : unambiguous assignment of the asymmetric stretching modes

Transition metal basicity