https://www.massey.ac.nz/~ychisti/Biodiesel.pdf

Biodiesel from microalgae.

Sustainable production of renewable energy is being hotly debated globally since it is increasingly understood that first generation biofuels, primarily produced from food crops and mostly oil seeds are limited in their ability to achieve targets for biofuel production, climate change mitigation and economic growth. These concerns have increased the interest in developing second generation biofuels produced from non-food feedstocks such as microalgae, which potentially offer greatest opportunities in the longer term. This paper reviews the current status of microalgae use for biodiesel production, including their cultivation, harvesting, and processing. The microalgae species most used for biodiesel production are presented and their main advantages described in comparison with other available biodiesel feedstocks. The various aspects associated with the design of microalgae production units are described, giving an overview of the current state of development of algae cultivation systems (photo-bioreactors and open ponds). Other potential applications and products from microalgae are also presented such as for biological sequestration of CO 2 , wastewater treatment, in human health, as food additive, and for aquaculture.

/pdf/microalgae-for-biodiesel-production-and-other-applications-a-54vmwufrsu.pdf

Microalgae for biodiesel production and other applications: A review

Sustainability is a key principle in natural resource management, and it involves operational efficiency, minimisation of environmental impact and socio-economic considerations; all of which are interdependent. It has become increasingly obvious that continued reliance on fossil fuel energy resources is unsustainable, owing to both depleting world reserves and the green house gas emissions associated with their use. Therefore, there are vigorous research initiatives aimed at developing alternative renewable and potentially carbon neutral solid, liquid and gaseous biofuels as alternative energy resources. However, alternate energy resources akin to first generation biofuels derived from terrestrial crops such as sugarcane, sugar beet, maize and rapeseed place an enormous strain on world food markets, contribute to water shortages and precipitate the destruction of the world's forests. Second generation biofuels derived from lignocellulosic agriculture and forest residues and from non-food crop feedstocks address some of the above problems; however there is concern over competing land use or required land use changes. Therefore, based on current knowledge and technology projections, third generation biofuels specifically derived from microalgae are considered to be a technically viable alternative energy resource that is devoid of the major drawbacks associated with first and second generation biofuels. Microalgae are photosynthetic microorganisms with simple growing requirements (light, sugars, CO 2 , N, P, and K) that can produce lipids, proteins and carbohydrates in large amounts over short periods of time. These products can be processed into both biofuels and valuable co-products. This study reviewed the technologies underpinning microalgae-to-biofuels systems, focusing on the biomass production, harvesting, conversion technologies, and the extraction of useful co-products. It also reviewed the synergistic coupling of microalgae propagation with carbon sequestration and wastewater treatment potential for mitigation of environmental impacts associated with energy conversion and utilisation. It was found that, whereas there are outstanding issues related to photosynthetic efficiencies and biomass output, microalgae-derived biofuels could progressively substitute a significant proportion of the fossil fuels required to meet the growing energy demand.

/pdf/biofuels-from-microalgae-a-review-of-technologies-for-1t1wwr5e69.pdf

Biofuels from microalgae—A review of technologies for production, processing, and extractions of biofuels and co-products

https://oatao.univ-toulouse.fr/2771/1/joannis-cassan_2771.pdf

Commercial applications of microalgae

The use of fossil fuels is now widely accepted as unsustainable due to depleting resources and the accumulation of greenhouse gases in the environment that have already exceeded the “dangerously high” threshold of 450 ppm CO2-e. To achieve environmental and economic sustainability, fuel production processes are required that are not only renewable, but also capable of sequestering atmospheric CO2. Currently, nearly all renewable energy sources (e.g. hydroelectric, solar, wind, tidal, geothermal) target the electricity market, while fuels make up a much larger share of the global energy demand (∼66%). Biofuels are therefore rapidly being developed. Second generation microalgal systems have the advantage that they can produce a wide range of feedstocks for the production of biodiesel, bioethanol, biomethane and biohydrogen. Biodiesel is currently produced from oil synthesized by conventional fuel crops that harvest the sun’s energy and store it as chemical energy. This presents a route for renewable and carbon-neutral fuel production. However, current supplies from oil crops and animal fats account for only approximately 0.3% of the current demand for transport fuels. Increasing biofuel production on arable land could have severe consequences for global food supply. In contrast, producing biodiesel from algae is widely regarded as one of the most efficient ways of generating biofuels and also appears to represent the only current renewable source of oil that could meet the global demand for transport fuels. The main advantages of second generation microalgal systems are that they: (1) Have a higher photon conversion efficiency (as evidenced by increased biomass yields per hectare): (2) Can be harvested batch-wise nearly all-year-round, providing a reliable and continuous supply of oil: (3) Can utilize salt and waste water streams, thereby greatly reducing freshwater use: (4) Can couple CO2-neutral fuel production with CO2 sequestration: (5) Produce non-toxic and highly biodegradable biofuels. Current limitations exist mainly in the harvesting process and in the supply of CO2 for high efficiency production. This review provides a brief overview of second generation biodiesel production systems using microalgae.

https://www.springer.com/cda/content/document/cda_downloaddocument/BioEnergyResearch_Second+Generation+Biofuels+High-Efficiency+Microalgae+for+Biodiesel+Production.pdf?SGWID=0-0-45-1347846-0

Second generation biofuels: high-efficiency microalgae for biodiesel production

Marine sponges are sources of high-value bioactives. Engineering aspects of in vitro culture of sponges from cuttings (explants) are poorly understood. This work develops a diffusion-controlled growth model for sponge explants. The model assumes that the explant growth is controlled by diffusive transport of at least some nutrients from the surrounding medium into the explant that generally has a poorly developed aquiferous system for internal irrigation during early stages of growth. Growth is assumed to obey Monod-type kinetics. The model is shown to satisfactorily explain the measured growth behavior of the marine sponge Crambe crambe in two different growth media. In addition, the model is generally consistent with published data for growth of explants of the sponges Disidea avara and Hemimycale columella. The model predicted that nutrient concentration profiles for nutrients, such as dissolved oxygen within the explant, are consistent with data published by independent researchers. In view of the proposed model's ability to explain available data for growth of several species of sponge explants, diffusive transport does play a controlling role in explant growth at least until a fully developed aquiferous system has become established. According to the model and experimental observations, the instantaneous growth rate depends on the size of the explant and all those factors that influence the diffusion of critical nutrients within the explant. Growth follows a hyperbolic profile that is consistent with the Monod kinetics.

/pdf/a-bioreaction-diffusion-model-for-growth-of-marine-sponge-1baw7f9m3l.pdf

A bioreaction-diffusion model for growth of marine sponge explants in bioreactors.

Removal of CO2 from flue gases coupled to the photosynthetic generation of organic matter by cyanobacteria

This chapter addresses major aspects in the design and scale-up of photobioreactors (PBRs) for hydrogen production, and provides guidelines for optimal process design. Light-driven H2 production is a promising, sustainable process, especially when using the microalga, Chlamydomonas reinhardtii. With present technology, the best strategy is to separate biomass growth from H2 evolution, with H2 production enhanced by sulfur starvation. In addition to optimizing the biological system, careful design and successful operation of the PBRs are of critical importance. Therefore, an optimal, tubular PBR design for the production of C. reinhardtii as the first step is considered, followed by H2 production in either tubular or flat panel PBRs as the second step. Based on available knowledge, the performance of a pilot facility for the continuous production of H2 by the two-step strategy is analyzed, and tubular PBRs are compared with flat panel PBRs. In this way, the potential for light-driven H2 production is evaluated, and major bottlenecks for the large-scale implementation of this technology are identified.

CHAPTER 16:Development of Photobioreactors for H2 Production from Algae

Abstract Current research indicates that n-3 polyunsaturated fatty acids (PUFAs) bind to polar lipids (phospholipids and glycolipids) seem to exert a greater bioavailability compared to their neutral forms. The aim of this work was to obtain eicosapentaenoic acid (EPA) rich polar lipids from the saponifiable lipids (SLs) extracted from the microalga Nannochloropsis sp. (33.4 ± 0.1% of EPA; 60 ± 0.6% polar lipids) by fractionation using silica-gel columns and importantly, non-polar and polar (ethanol) non-toxic solvents. Nowadays, few studies have been conducted towards the extraction and purification of polar lipids. Firstly, the solvent type for obtaining the neutral saponifiable lipid (NSL) fraction (ethyl acetate, EA, butyl acetate, BA) and the SL/silica-gel, SL/BA, and SL/ethanol ratios were optimized in a small silica-gel cartridge (0.69 g silica gel). The optimized conditions were an SL/silica-gel ratio of 22.6 mg/g, an SL/BA ratio of 1.56 mg/mL and an SL/ethanol ratio of 0.312 mg/mL. Next, the fractionation scale was increased to a column containing 10 g of silica-gel. At this scale, a BA SL fraction was obtained with 96.2 ± 0.5% of NSLs, and an ethanol SL fraction containing 97.7 ± 0.3% of polar lipids and 44.9 ± 0.2% of EPA. In the ethanol fraction, 86.6 ± 0.2% of the polar lipids and 71.5 ± 0.4% of the EPA from the SL microalgal extract were recovered. Consequently, EPA-rich polar lipids were obtained at high yields and purities, which could be used as a source of n-3 PUFAs with greater bioavailability than those based on neutral lipids. 

/pdf/obtaining-epa-rich-polar-lipids-from-microalga-227bc5hb.pdf

E. Molina Grima

Papers

A bioreaction-diffusion model for growth of marine sponge explants in bioreactors.

Removal of CO2 from flue gases coupled to the photosynthetic generation of organic matter by cyanobacteria

CHAPTER 16:Development of Photobioreactors for H2 Production from Algae

Obtaining EPA-rich polar lipids from microalga Nannochloropsis sp. by silica-gel chromatography using non-toxic solvents

Cultivation of Scenedesmus spp. in Raceway Reactor