Showing papers by "Eduardo Silva published in 2012"

Vision-based assisted teleoperation for inspection tasks with a small ROV

Abstract: It is well-known that ROVs require human intervention to guarantee the success of their assignment, as well as the equipment safety. However, as its teleoperation is quite complex to perform, there is a need for assisted teleoperation. This study aims to take on this challenge by developing vision-based assisted teleoperation maneuvers, since a standard camera is present in any ROV. The proposed approach is a visual servoing solution, that allows the user to select between several standard image processing methods and is applied to a 3-DOF ROV. The most interesting characteristic of the presented system is the exclusive use of the camera data to improve the teleoperation of an underactuated ROV. It is demonstrated through the comparison and evaluation of standard implementations of different vision methods and the execution of simple maneuvers to acquire experimental results, that the teleoperation of a small ROV can be drastically improved without the need to install additional sensors.

Real-time 3D ball trajectory estimation for RoboCup middle size league using a single camera

Abstract: This paper proposes a novel architecture for real-time 3D ball trajectory estimation with a monocular camera in Middle Size League scenario. Our proposed system consists on detecting possible multiple ball candidates in the image, that are filtered in a multi-target data association layer. Validated ball candidates have their 3D trajectory estimated by Maximum Likelihood method (MLM) followed by a recursive refinement obtained with an Extended Kalman Filter (EKF). Our approach was validated in real RoboCup scenario, evaluated recurring to ground truth information obtained by alternative methods allowing overall performance and quality assessment.

Environmental modeling with precision navigation using ROAZ autonomous surface vehicle

Abstract: The use of robotic vehicles for environmental modeling is discussed. This paper presents diverse results in autonomous marine missions with the ROAZ autonomous surface vehicle. The vehicle can perform autonomous missions while gathering marine data with high inertial and positioning precision. The underwater world is an, economical and environmental, asset that need new tools to study and preserve it. ROAZ is used in marine environment missions since it can sense and monitor the surface and underwater scenarios. Is equipped with a diverse set of sensors, cameras and underwater sonars that generate 3D environmental models. It is used for study the marine life and possible underwater wrecks that can pollute or be a danger to marine navigation. The 3D model and integration of multibeam and sidescan sonars represent a challenge in nowadays. Adding that it is important that robots can explore an area and make decisions based on their surroundings and goals. Regard that, autonomous robotic systems can relieve human beings of repetitive and dangerous tasks.

Ball Sensing in a Leg Like Robotic Kicker

Abstract: The trend to have more cooperative play and the increase of game dynamics in Robocup MSL League motivates the improvement of skills for ball passing and reception. Currently the majority of the MSL teams uses ball handling devices with rollers to have more precise kicks but limiting the capability to kick a moving ball without stopping it and grabbing it. This paper addresses the problem to receive and kick a fast moving ball without having to grab it with a roller based ball handling device. Here, the main difficulty is the high latency and low rate of the measurements of the ball sensing systems, based in vision or laser scanner sensors.Our robots use a geared leg coupled to a motor that acts simultaneously as the kicking device and low level ball sensor. This paper proposes a new method to improve the capability for ball sensing in the kicker, by combining high rate measurements from the torque and energy in the motor and angular position of the kicker leg. The developed method endows the kicker device with an effective ball detection ability, validated in several game situations like in an interception to a fast pass or when chasing the ball where the relative speed from robot to ball is low. This can be used to optimize the kick instant or by the embedded kicker control system to absorb the ball energy.

Towards a Mobile Three-dimensional Modelling System for Underground Structures

Abstract: Robotica 2012: 12th International Conference on Autonomous Robot Systems and Competitions April 11, 2012, Guimaraes, Portugal