Showing papers by "Enrico Calloni published in 2022"

First joint observation by the underground gravitational-wave detector, KAGRA, with GEO600

Abstract: We report the results of the first joint observation of the KAGRA detector with GEO 600. GEO 600 and KAGRA performed a joint observing run from April 7 to 20, 2020. We present the results of the joint analysis of the GEO–KAGRA data for transient gravitational-wave signals, including the coalescence of neutron-star binaries and generic unmodeled transients. We also perform dedicated searches for binary coalescence signals and generic transients associated with gamma-ray burst events observed during the joint run. No gravitational-wave events were identified. We evaluate the minimum detectable amplitude for various types of transient signals and the spacetime volume for which the network is sensitive to binary neutron-star coalescences. We also place lower limits on the distances to the gamma-ray bursts analysed based on the non-detection of an associated gravitational-wave signal for several signal models, including binary coalescences. These analyses demonstrate the feasibility and utility of KAGRA as a member of the global gravitational-wave detector network.

All-sky search for continuous gravitational waves from isolated neutron stars using Advanced LIGO and Advanced Virgo O3 data

Abstract: We present results of an all-sky search for continuous gravitational waves which can be produced by spinning neutron stars with an asymmetry around their rotation axis, using data from the third observing run of the Advanced LIGO and Advanced Virgo detectors. Four different analysis methods are used to search in a gravitational-wave frequency band from 10 to 2048 Hz and a first frequency derivative from $-10^{-8}$ to $10^{-9}$ Hz/s. No statistically-significant periodic gravitational-wave signal is observed by any of the four searches. As a result, upper limits on the gravitational-wave strain amplitude $h_0$ are calculated. The best upper limits are obtained in the frequency range of 100 to 200 Hz and they are ${\sim}1.1\times10^{-25}$ at 95\% confidence-level. The minimum upper limit of $1.10\times10^{-25}$ is achieved at a frequency 111.5 Hz. We also place constraints on the rates and abundances of nearby planetary- and asteroid-mass primordial black holes that could give rise to continuous gravitational-wave signals.

Model-based Cross-correlation Search for Gravitational Waves from the Low-mass X-Ray Binary Scorpius X-1 in LIGO O3 Data

Abstract: We present the results of a model-based search for continuous gravitational waves from the low-mass X-ray binary Scorpius X-1 using LIGO detector data from the third observing run of Advanced LIGO and Advanced Virgo. This is a semicoherent search that uses details of the signal model to coherently combine data separated by less than a specified coherence time, which can be adjusted to balance sensitivity with computing cost. The search covered a range of gravitational-wave frequencies from 25 to 1600 Hz, as well as ranges in orbital speed, frequency, and phase determined from observational constraints. No significant detection candidates were found, and upper limits were set as a function of frequency. The most stringent limits, between 100 and 200 Hz, correspond to an amplitude h 0 of about 10−25 when marginalized isotropically over the unknown inclination angle of the neutron star’s rotation axis, or less than 4 × 10−26 assuming the optimal orientation. The sensitivity of this search is now probing amplitudes predicted by models of torque balance equilibrium. For the usual conservative model assuming accretion at the surface of the neutron star, our isotropically marginalized upper limits are close to the predicted amplitude from about 70 to 100 Hz; the limits assuming that the neutron star spin is aligned with the most likely orbital angular momentum are below the conservative torque balance predictions from 40 to 200 Hz. Assuming a broader range of accretion models, our direct limits on gravitational-wave amplitude delve into the relevant parameter space over a wide range of frequencies, to 500 Hz or more.

Virgo Detector Characterization and Data Quality during the O3 run

Abstract: . The Advanced Virgo detector has contributed with its data to the rapid growth of the number of detected gravitational-wave signals in the past few years, alongside the two LIGO instruments. First, during the last month of the Observation Run 2 (O2) in August 2017 (with, most notably, the compact binary mergers GW170814 and GW170817) and then during the full Observation Run 3 (O3): an 11 months data taking period, between April 2019 and March 2020, that led to the addition of about 80 events to the catalog of transient gravitational-wave sources maintained by LIGO, Virgo and KAGRA. These discoveries and the manifold exploitation of the detected waveforms require an accurate characterization of the quality of the data, such as continuous study and monitoring of the detector noise. These activities, collectively named detector characterization or DetChar , span the whole workflow of the Virgo data, from the instrument front-end to the final analysis. They are described in details in the following article, with a focus on the associated tools, the results achieved by the Virgo DetChar group during the O3 run and the main prospects for future data-taking periods with an improved detector.

Search for subsolar-mass black hole binaries in the second part of Advanced LIGO’s and Advanced Virgo’s third observing run

Abstract: We describe a search for gravitational waves from compact binaries with at least one component with mass 0.2 M⊙–1.0 M⊙ and mass ratio q ≥ 0.1 in Advanced LIGO and Advanced Virgo data collected between 1 November 2019, 15:00 UTC and 27 March 2020, 17:00 UTC. No signals were detected. The most significant candidate has a false alarm rate of $0.2 \, \rm {yr}^{-1}$. We estimate the sensitivity of our search over the entirety of Advanced LIGO’s and Advanced Virgo’s third observing run, and present the most stringent limits to date on the merger rate of binary black holes with at least one subsolar-mass component. We use the upper limits to constrain two fiducial scenarios that could produce subsolar-mass black holes: primordial black holes (PBH) and a model of dissipative dark matter. The PBH model uses recent prescriptions for the merger rate of PBH binaries that include a rate suppression factor to effectively account for PBH early binary disruptions. If the PBHs are monochromatically distributed, we can exclude a dark matter fraction in PBHs fPBH ≳ 0.6 (at 90% confidence) in the probed subsolar-mass range. However, if we allow for broad PBH mass distributions we are unable to rule out fPBH = 1. For the dissipative model, where the dark matter has chemistry that allows a small fraction to cool and collapse into black holes, we find an upper bound fDBH < 10−5 on the fraction of atomic dark matter collapsed into black holes.

Search for gravitational waves from Scorpius X-1 with a hidden Markov model in O3 LIGO data

Abstract: Results are presented for a semi-coherent search for continuous gravitational waves from the low-mass X-ray binary Scorpius X-1, using a hidden Markov model (HMM) to allow for spin wandering. This search improves on previous HMM-based searches of Laser Interferometer Gravitational-wave Observatory (LIGO) data by including the orbital period in the search template grid, and by analyzing data from the latest (third) observing run (O3). In the frequency range searched, from 60 to 500 Hz, we find no evidence of gravitational radiation. This is the most sensitive search for Scorpius X-1 using a HMM to date. For the most sensitive sub-band, starting at $256.06$Hz, we report an upper limit on gravitational wave strain (at $95 \%$ confidence) of $h_{0}^{95\%}=6.16\times10^{-26}$, assuming the orbital inclination angle takes its electromagnetically restricted value $\iota=44^{\circ}$. The upper limits on gravitational wave strain reported here are on average a factor of $\sim 3$ lower than in the O2 HMM search. This is the first Scorpius X-1 HMM search with upper limits that reach below the indirect torque-balance limit for certain sub-bands, assuming $\iota=44^{\circ}$.

A lower limit for Newtonian-noise models of the Einstein Telescope

Abstract: Abstract The Einstein Telescope (ET) is a proposed third-generation gravitational-wave (GW) underground observatory. It will have greatly increased sensitivity compared to current GW detectors, and it is designed to extend the observation band down to a few Hz. At these frequencies, a major limitation of the ET sensitivity is predicted to be due to gravitational fluctuations produced by the environment, most importantly by the seismic field, which give rise to the so-called Newtonian noise (NN). Accurate models of ET NN are crucial to assess the compatibility of an ET candidate site with the ET sensitivity target also considering a possible reduction in NN by noise cancellation. With NN models becoming increasingly complex as they include details of geology and topography, it is crucial to have tools to make robust assessments of their accuracy. For this purpose, we derive a lower bound on seismic NN spectra, which is weakly dependent on geology and properties of the seismic field. As a first application, we use the lower limit to compare it with NN estimates recently calculated for the Sardinia and Euregio Meuse–Rhine (EMR) candidate sites. We find the utility of the method, which shows an inconsistency with the predictions for the EMR site, which indicates that ET NN models require further improvement.

Search for continuous gravitational wave emission from the Milky Way center in O3 LIGO-Virgo data

Abstract: We present a directed search for continuous gravitational wave (CW) signals emitted by spinning neutron stars located in the inner parsecs of the Galactic Center (GC). Compelling evidence for the presence of a numerous population of neutron stars has been reported in the literature, turning this region into a very interesting place to look for CWs. In this search, data from the full O3 LIGO--Virgo run in the detector frequency band $[10,2000]\rm~Hz$ have been used. No significant detection was found and 95$\%$ confidence level upper limits on the signal strain amplitude were computed, over the full search band, with the deepest limit of about $7.6\times 10^{-26}$ at $\simeq 142\rm~Hz$. These results are significantly more constraining than those reported in previous searches. We use these limits to put constraints on the fiducial neutron star ellipticity and r-mode amplitude. These limits can be also translated into constraints in the black hole mass -- boson mass plane for a hypothetical population of boson clouds around spinning black holes located in the GC.

Casimir energy for N superconducting cavities: a model for the YBCO (GdBCO) sample to be used in the Archimedes experiment

Abstract: Abstract In this paper we study the Casimir energy of a sample made by N cavities, with $$N\gg 1$$ N ≫ 1 , across the transition from the metallic to the superconducting phase of the constituting plates. After having characterised the energy for the configuration in which the layers constituting the cavities are made by dielectric and for the configuration in which the layers are made by plasma sheets, we concentrate our analysis on the latter. It represents the final step towards the macroscopical characterisation of a “multi-cavity” (with N large) necessary to fully understand the behaviour of the Casimir energy of a YBCO (or a GdBCO) sample across the transition. Our analysis is especially useful to the Archimedes experiment, aimed at measuring the interaction of the electromagnetic vacuum energy with a gravitational field. To this purpose, we aim at modulating the Casimir energy of a layered structure, the multi-cavity, by inducing a transition from the metallic to the superconducting phase. After having characterised the Casimir energy of such a structure for both the metallic and the superconducting phase, we give an estimate of the modulation of the energy across the transition.

Search for gravitational-wave transients associated with magnetar bursts in Advanced LIGO and Advanced Virgo data from the third observing run

Abstract: Gravitational waves are expected to be produced from neutron star oscillations associated with magnetar giant flares and short bursts. We present the results of a search for short-duration (milliseconds to seconds) and long-duration ( ∼ 100 s) transient gravitational waves from 13 magnetar short bursts observed during Advanced LIGO, Advanced Virgo and KAGRA’s third observation run. These 13 bursts come from two magnetars, SGR 1935 + 2154 and Swift J1818.0 − 1607. We also include three other electromagnetic burst events detected by Fermi GBM which were identified as likely coming from one or more magnetars, but they have no association with a known magnetar. No magnetar giant flares were detected during the analysis period. We find no evidence of gravitational waves associated with any of these 16 bursts. We place upper bounds on the root-sum-square of the integrated gravitational-wave strain that reach 2 . 2 × 10 − 23 / √ Hz at 100 Hz for the short-duration search and 8 . 7 × 10 − 23 / √ Hz at 450 Hz for the long-duration search, given a detection efficiency of 50%. For a ringdown signal at 1590 Hz targeted by the short-duration search the limit is set to 1 . 8 × 10 − 22 / √ Hz. Using the estimated distance to each magnetar, we derive upper bounds on the emitted gravitational-wave energy of 3 . 2 × 10 43 erg ( 7 . 3 × 10 43 erg) for SGR 1935 + 2154 and 8 . 2 × 10 42 erg ( 2 . 8 × 10 43 erg) for Swift J1818.0 − 1607, for the short-duration (long-duration) search. Assuming isotropic emission of electromagnetic radiation of the burst fluences, we constrain the ratio of gravitational-wave energy to electromagnetic energy for bursts from SGR 1935 + 2154 with available fluence information. The lowest of these ratios is 3 Wen et al. 2019), making them detectable with Advanced LIGO (Aasi et al. 2015), Advanced Virgo (Acernese et al. 2015), and KAGRA (Akutsu et al. 2019; Akutsu et al. 2021) gravitational-wave observatories (Abbott et al. 2018). Detailed calculations of the rearrangement of the neutron star’s magnetic field using analytic calculations (Levin & van Hoven 2011) and numerical-relativity simulations (Ciolfi al. Zink & Rezzolla 2012; Tsokaros et al. 2021) yield more realistic estimates for the gravitational-wave energy emitted in the f -mode during these events. These models suggest gravitational waves associated with Galactic magnetar flares are not observable with the current

Virgo Detector Characterization and Data Quality: results from the O3 run

Abstract: The Advanced Virgo detector has contributed with its data to the rapid growth of the number of detected gravitational-wave (GW) signals in the past few years, alongside the two Advanced LIGO instruments. First during the last month of the Observation Run 2 (O2) in August 2017 (with, most notably, the compact binary mergers GW170814 and GW170817), and then during the full Observation Run 3 (O3): an 11-months data taking period, between April 2019 and March 2020, that led to the addition of about 80 events to the catalog of transient GW sources maintained by LIGO, Virgo and now KAGRA. These discoveries and the manifold exploitation of the detected waveforms require an accurate characterization of the quality of the data, such as continuous study and monitoring of the detector noise sources. These activities, collectively named {\em detector characterization and data quality} or {\em DetChar}, span the whole workflow of the Virgo data, from the instrument front-end hardware to the final analyses. They are described in details in the following article, with a focus on the results achieved by the Virgo DetChar group during the O3 run. Concurrently, a companion article describes the tools that have been used by the Virgo DetChar group to perform this work.

Study of correlations between seismic data and Virgo’s gravitational-wave detector data

Abstract: It is expected that noise produced by terrestrial gravity fluctuations will start to limit the sensitivity of the ground-based, gravitational-wave detector Virgo in coming observation runs. A system is under preparation at Virgo to cancel this noise, also known as Newtonian noise. This Newtonian noise cancelation system requires the deployment of seismometer arrays inside the Virgo buildings. Crucial for the design of such a system is a detailed understanding of correlations between ground vibrations and Virgo’s gravitational waves detector data. In this article, we present first analyses of such correlations observed with a tiltmeter. We find that revealed correlations are stronger than predicted by possible pure gravitational coupling, which is pointing towards additional coupling mechanisms. These findings might impact the design of the Newtonian noise cancelation system if the additional couplings cannot be mitigated.

Search for Gravitational Waves Associated with Fast Radio Bursts Detected by CHIME/FRB During the LIGO--Virgo Observing Run O3a

Abstract: We search for gravitational-wave transients associated with fast radio bursts (FRBs) detected by the Canadian Hydrogen Intensity Mapping Experiment Fast Radio Burst Project (CHIME/FRB), during the first part of the third observing run of Advanced LIGO and Advanced Virgo (1 April 2019 15:00 UTC – 1 Oct 2019 15:00 UTC). Triggers from 22 FRBs were analyzed with a search that targets compact binary coalescences with at least one neutron star component. A targeted search for generic gravitational-wave transients was conducted on 40 FRBs. We find no significant evidence for a gravitational-wave association in either search. Given the large uncertainties in the distances of the FRBs inferred from the dispersion measures in our sample, however, this does not conclusively exclude any progenitor models that include emission of a gravitational wave of the types searched for from any of these FRB events. We report 90% confidence lower bounds on the distance to each FRB for a range of gravitational-wave progenitor models. By combining the inferred maximum distance information for each FRB with the sensitivity of the gravitational-wave searches, we set upper limits on the energy emitted through gravitational waves for a range of emission scenarios. We find values of order 10–10 erg for a range of different emission models with central gravitational wave frequencies in the range 70–3560 Hz. Finally, we also found no significant coincident detection of gravitational waves with the repeater, FRB 20200120E, which is the closest known extragalactic FRB.

Virgo Detector Characterization and Data Quality: tools

Abstract: Detector characterization and data quality studies -- collectively referred to as {\em DetChar} activities in this article -- are paramount to the scientific exploitation of the joint dataset collected by the LIGO-Virgo-KAGRA global network of ground-based gravitational-wave (GW) detectors. They take place during each phase of the operation of the instruments (upgrade, tuning and optimization, data taking), are required at all steps of the dataflow (from data acquisition to the final list of GW events) and operate at various latencies (from near real-time to vet the public alerts to offline analyses). This work requires a wide set of tools which have been developed over the years to fulfill the requirements of the various DetChar studies: data access and bookkeeping; global monitoring of the instruments and of the different steps of the data processing; studies of the global properties of the noise at the detector outputs; identification and follow-up of noise peculiar features (whether they be transient or continuously present in the data); quick processing of the public alerts. The present article reviews all the tools used by the Virgo DetChar group during the third LIGO-Virgo Observation Run (O3, from April 2019 to March 2020), mainly to analyse the Virgo data acquired at EGO. Concurrently, a companion article focuses on the results achieved by the DetChar group during the O3 run using these tools.

0 51 10 70 v 1 2 3 N ov 2 00 5 PHOTON GREEN FUNCTIONS IN CURVED SPACETIME

Abstract: Quantization of electrodynamics in curved space-time in the Lorenz gauge and with arbitrary gauge parameter makes it necessary to study Green functions of non-minimal operators with variable coefficients. Starting from the integral representation of photon Green functions, we link them to the evaluation of integrals involving Γ-functions. Eventually, the full asymptotic expansion of the Feynman photon Green function at small values of the world function, as well as its explicit dependence on the gauge parameter, are obtained without adding by hand a mass term to the Faddeev–Popov Lagrangian. Coincidence limits of second covariant derivatives of the associated Hadamard function are also evaluated, as a first step towards the energy-momentum tensor in the non-minimal case.

Quantum zero point electromagnetic energy difference between the superconducting and the normal phase in a high- Tc superconducting metal bulk sample

Abstract: We provide a novel methodological approach to the estimate of the change of the Quantum Vacuum electromagnetic energy density in a High critical Temperature superconducting metal bulk sample, when it undergoes the transition in temperature, from the superconducting to the normal phase. The various contributions to the Casimir energy in the two phases are highlighted and compared. While the TM polarization of the vacuum mode allows for a macroscopic description of the superconducting transition, the changes in the TE vacuum mode induced by the superconductive correlations are introduced within a microscopic model, which does not explicitly take into account the anisotropic structure of the material.

Casimir energy for N superconducting cavities: a model for the YBCO (BSCCO)

Abstract: In this paper we study the Casimir energy of a sample made by N cavities, with N ≫ 1, across the transition from the metallic to the superconducting phase of the constituting plates. After having characterised the energy for the configuration in which the layers constituting the cavities are made by dielectric and for the configuration in which the layers are made by plasma sheets, we concentrate our analysis on the latter. It represents the final step towards the macroscopical characterisation of a “multi cavity” (with N large) necessary to fully understand the behaviour of the Casimir energy of a YBCO (or a BSCCO) sample across the transition. Our analysis is especially useful to the Archimedes experiment, aimed at measuring the interaction of the electromagnetic vacuum energy with a gravitational field. To this purpose, we aim at modulating the Casimir energy of a layered structure, the multi cavity, by inducing a transition from the metallic to the superconducting phase. After having characterised the Casimir energy of such a structure for both the metallic and the superconducting phase, we give an estimate of the modulation of the energy across the transition. PACS numbers: 12.20.Ds, 12.20.-m, 74.72.-h ∗ luigi.rosa@unina.it 1 ar X iv :2 20 2. 06 32 8v 1 [ qu an tph ] 1 3 Fe b 20 22