Semiconductor-based photocatalysis is considered to be an attractive way for solving the worldwide energy shortage and environmental pollution issues. Since the pioneering work in 2009 on graphitic carbon nitride (g-C3N4) for visible-light photocatalytic water splitting, g-C3N4 -based photocatalysis has become a very hot research topic. This review summarizes the recent progress regarding the design and preparation of g-C3N4 -based photocatalysts, including the fabrication and nanostructure design of pristine g-C3N4 , bandgap engineering through atomic-level doping and molecular-level modification, and the preparation of g-C3N4 -based semiconductor composites. Also, the photo-catalytic applications of g-C3N4 -based photocatalysts in the fields of water splitting, CO2 reduction, pollutant degradation, organic syntheses, and bacterial disinfection are reviewed, with emphasis on photocatalysis promoted by carbon materials, non-noble-metal cocatalysts, and Z-scheme heterojunctions. Finally, the concluding remarks are presented and some perspectives regarding the future development of g-C3N4 -based photocatalysts are highlighted.

Polymeric Photocatalysts Based on Graphitic Carbon Nitride

Persistent organic pollutants (POPs) are carbon-based chemical substances that are resistant to environmental degradation and may not be completely removed through treatment processes. Their persistence can contribute to adverse health impacts on wild-life and human beings. Thus, the solar photocatalysis process has received increasing attention due to its great potential as a green and eco-friendly process for the elimination of POPs to increase the security of clean water. In this context, ZnO nanostructures have been shown to be prominent photocatalyst candidates to be used in photodegradation owing to the facts that they are low-cost, non-toxic and more efficient in the absorption across a large fraction of the solar spectrum compared to TiO 2 . There are several aspects, however, need to be taken into consideration for further development. The purpose of this paper is to review the photo-degradation mechanisms of POPs and the recent progress in ZnO nanostructured fabrication methods including doping, heterojunction and modification techniques as well as improvements of ZnO as a photocatalyst. The second objective of this review is to evaluate the immobilization of photocatalyst and suspension systems while looking into their future challenges and prospects.

A review of ZnO nanoparticles as solar photocatalysts: Synthesis, mechanisms and applications

One-dimensional (1D) ZnO nanostructures have been studied intensively and extensively over the last decade not only for their remarkable chemical and physical properties, but also for their current and future diverse technological applications. This article gives a comprehensive overview of the progress that has been made within the context of 1D ZnO nanostructures synthesized via wet chemical methods. We will cover the synthetic methodologies and corresponding growth mechanisms, different structures, doping and alloying, position-controlled growth on substrates, and finally, their functional properties as catalysts, hydrophobic surfaces, sensors, and in nanoelectronic, optical, optoelectronic, and energy harvesting devices.

/pdf/one-dimensional-zno-nanostructures-solution-growth-and-30xs4d6be7.pdf

One-dimensional ZnO nanostructures: Solution growth and functional properties

Crystal facet engineering of semiconductor photocatalysts: motivations, advances and unique properties

ZnO, aside from TiO2, has been considered as a promising material for purification and disinfection of water and air, and remediation of hazardous waste, owing to its high activity, environment-friendly feature and lower cost. However, their poor visible light utilization greatly limited their practical applications. Herein, we demonstrate the fabrication of different aspect ratios of the ZnO nanorods with surface defects by mechanical-assisted thermal decomposition method. The experiments revealed that ZnO nanorods with higher aspect ratio and surface defects show significantly higher photocatalytic performances.

/pdf/effect-of-aspect-ratio-and-surface-defects-on-the-2l9gz7vz5l.pdf

Effect of aspect ratio and surface defects on the photocatalytic activity of ZnO nanorods

Fine tuning of the face orientation of ZnO crystals to optimize their photocatalytic activity

Recently, inorganic/inorganic and organic/inorganic heterostructured materials have attracted considerable research interest, due to their unusual physicochemical properties, which cannot be achieved by conventional solid-state reactions. In order to develop new hybrid materials, various synthetic approaches, such as vacuum deposition, Langmuir–Blodgett films, selfassembly, and intercalation techniques, have been explored. Among them, the intercalation reaction technique—that is, the reversible insertion of guest species into the two-dimensional host lattice—is expected to be one of the most effective tools for preparing new layered heterostructures because this process can provide a soft chemical way of hybridizing inorganic/inorganic, organic/inorganic, or biological/inorganic compounds. In fact, the intercalation/deintercalation process allows us to design high-performance materials in a solution at ambient temperature and pressure, just as “soft solution processing” provides a simple and economical route for advanced inorganic materials by means of an environmentally benign, lowenergy method. These unique advantages of the intercalation technique have led to its wide application to diverse fields of the solid-state sciences, namely, secondary (rechargeable) batteries, electrochromic systems, oxidation–reduction catalysts, separating agents, sorbents, and so on. Through these extensive studies, many kinds of low-dimensional compounds have been developed as host materials for the intercalation reaction, including graphite, transition-metal chalcogenides, transitionmetal oxides, aluminosilicates, metal phosphates, metal chalcogenohalides, and so on. Recently, the area of intercalation chemistry has been extended to high-Tc superconducting copper oxides, resulting in remarkable structural anisotropy.

Soft Chemical Routes to Heterostructured High-Tc Superconducting Materials

The present invention relates to a method for increasing a photocatalytic activity of zinc oxide, which comprises preparing zinc oxide nanoplate crystals having a planar morphology on their (0001) crystal faces. In addition, the present invention relates to a process for synthesizing zinc oxide nanoplate crystals, a tooth whitening composition and a composition for degrading organic pollutants.

Zinc oxide having enhanced photocatalytic activity

We have developed new asymmetric high-Tc superconducting (Bi1.85Pb0.35)Sr1.9Ca2.1Cu3.1O10+δ membrane with high efficiency for nitrogen separation from air. This membrane with controlled pore structure can be prepared by the electrophoretic deposition of colloidal (Bi1.85Pb0.35)Sr1.9Ca2.1Cu3.1O10+δ nanosheets on the substrate pellet. The presence of mesopores in the asymmetric membrane plays an important role in achieving high gas selectivity through the enhancement of magnetic interaction between the superconductor membrane and oxygen molecules. Also, we have found that the control of experimental factors like the orientation of magnetic field, temperature, and pressure difference across the sample is of special importance in optimizing the gas selectivity of the membrane. The present results underscore the applicability of the superconductor membrane as a gas separation device.

Asymmetric High-Tc Superconducting Gas Separation Membrane

A coordination compound of HgI(2)(pyridine)(2) can be successfully intercalated into a single crystalline Bi(2)Sr(2)CaCu(2)O(y) high-T(c) superconductor through an interlayer complexation reaction between pyridine molecules and bismuth cuprate pre-intercalated with mercuric iodide. X-ray diffraction and X-ray absorption spectroscopic results clearly demonstrate that the single crystalline nature of the pristine bismuth cuprate remains unchanged even after the intercalation of organic complex as well as those of iodine and mercuric iodide. According to the angle-dependent dc magnetization measurements, the intercalation of bulky organic molecules completely blocks superconductive currents along the c-axis, whereas a superconducting transition along the in-plane direction still occurs in the organic intercalate. In the case of the iodine or mercuric iodide intercalates with smaller lattice expansions, an out-of-plane diamagnetic transition is not wholly quenched but significantly depressed by the intercalation, confirming the reduction of interlayer interaction. The present finding can provide straightforward evidence of the two-dimensionality of high temperature superconductivity in the present cuprate-based nanohybrid material.

Eue Soon Jang

Papers

Fine tuning of the face orientation of ZnO crystals to optimize their photocatalytic activity

Soft Chemical Routes to Heterostructured High-Tc Superconducting Materials

Zinc oxide having enhanced photocatalytic activity

Asymmetric High-Tc Superconducting Gas Separation Membrane

Evidence of Two-Dimensional Superconductivity in the Single Crystalline Nanohybrid of Organic-Bismuth Cuprate