Phytic acid: A bio-based flame retardant for cotton and wool fabrics

This investigation is carried out to understand the effects of water absorption on the mechanical properties of hybrid phenol formaldehyde (PF) composite fabricated with Areca Fine Fibres (AFFs) and Calotropis Gigantea Fibre (CGF). Hybrid CGF/AFF/PF composites were manufactured using the hand layup technique at varying weight percentages of fibre reinforcement (25, 35 and 45%). Hybrid composite having 35 wt.% showed better mechanical properties (tensile strength ca. 59 MPa, flexural strength ca. 73 MPa and impact strength 1.43 kJ/m2) under wet and dry conditions as compared to the other hybrid composites. In general, the inclusion of the fibres enhanced the mechanical properties of neat PF. Increase in the fibre content increased the water absorption, however, after 120 h of immersion, all the composites attained an equilibrium state.

/pdf/effects-of-water-absorption-on-the-mechanical-properties-of-13yh41temq.pdf

Effects of water absorption on the mechanical properties of hybrid natural fibre/phenol formaldehyde composites.

Synergistic effect of nano silicon dioxide and ammonium polyphosphate on flame retardancy of wood fiber–polyethylene composites Part A Applied science and manufacturing

Nylon—A material introduction and overview for biomedical applications

In the modern age of nanotechnology, the discovery of graphene has opened up the way to study and develop of several novel 2D materials. The unique physical and chemical properties of 2D materials have enhanced their research, making them superior to the commercial bulk materials used in various applications. Efforts have been made in the current study to present an overview of the intrinsic properties of these materials. Furthermore, synthesis and applications are also reviewed and discussed. Finally, the future outlook of 2D materials is discussed to enhance the research and performance of these materials, which can result in broader applications benefitting the electrical and electronics industries and society. Intensive research into 2D materials is expected to lead to the discovery of new materials with enhanced properties that will benefit the industry and society at large.

https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/ppsc.202200031

A Review of the Synthesis, Properties, and Applications of 2D Materials

Polyethylene (PE) is one the most used plastics worldwide for a wide range of applications due to its good mechanical and chemical resistance, low density, cost efficiency, ease of processability, non-reactivity, low toxicity, good electric insulation, and good functionality. However, its high flammability and rapid flame spread pose dangers for certain applications. Therefore, different flame-retardant (FR) additives are incorporated into PE to increase its flame retardancy. In this review article, research papers from the past 10 years on the flame retardancy of PE systems are comprehensively reviewed and classified based on the additive sources. The FR additives are classified in well-known FR families, including phosphorous, melamine, nitrogen, inorganic hydroxides, boron, and silicon. The mechanism of fire retardance in each family is pinpointed. In addition to the efficiency of each FR in increasing the flame retardancy, its impact on the mechanical properties of the PE system is also discussed. Most of the FRs can decrease the heat release rate (HRR) of the PE products and simultaneously maintains the mechanical properties in appropriate ratios. Based on the literature, inorganic hydroxide seems to be used more in PE systems compared to other families. Finally, the role of nanotechnology for more efficient FR-PE systems is discussed and recommendations are given on implementing strategies that could help incorporate flame retardancy in the circular economy model.

The Flame Retardancy of Polyethylene Composites: From Fundamental Concepts to Nanocomposites.

Analysis and modeling of modified styrene–acrylonitrile/carboxylated acrylonitrile butadiene rubber nanocomposites filled with graphene and graphene oxide: Interfacial interaction and nonlinear elastoplastic behavior

Fatemeh Morshedi Dehaghi

Papers

The Flame Retardancy of Polyethylene Composites: From Fundamental Concepts to Nanocomposites.

Analysis and modeling of modified styrene–acrylonitrile/carboxylated acrylonitrile butadiene rubber nanocomposites filled with graphene and graphene oxide: Interfacial interaction and nonlinear elastoplastic behavior