N-Heterocyclic carbenes have become universal ligands in organometallic and inorganic coordination chemistry. They not only bind to any transition metal, be it in low or high oxidation states, but also to main group elements such as beryllium, sulfur, and iodine. Because of their specific coordination chemistry, N-heterocyclic carbenes both stabilize and activate metal centers in quite different key catalytic steps of organic syntheses, for example, C-H activation, C-C, C-H, C-O, and C-N bond formation. There is now ample evidence that in the new generation of organometallic catalysts the established ligand class of organophosphanes will be supplemented and, in part, replaced by N-heterocyclic carbenes. Over the past few years, this chemistry has been the field of vivid scientific competition, and yielded previously unexpected successes in key areas of homogeneous catalysis. From the work in numerous academic laboratories and in industry, a revolutionary turning point in oraganometallic catalysis is emerging.

http://aether.cmi.ua.ac.be/artikels/Artikels%20Gitte/Artikels/Reviews/NHC-%20liganden%20Herrmann.pdf

N-heterocyclic carbenes: a new concept in organometallic catalysis.

Although fire is now rarely used in synthetic chemistry, it was not until Robert Bunsen invented the burner in 1855 that the energy from this heat source could be applied to a reaction vessel in a focused manner. The Bunsen burner was later superseded by the isomantle, oil bath, or hot plate as a source for applying heat to a chemical reaction. In the past few years, heating and driving chemical reactions by microwave energy has been an increasingly popular theme in the scientific community. This nonclassical heating technique is slowly moving from a laboratory curiosity to an established technique that is heavily used in both academia and industry. The efficiency of "microwave flash heating" in dramatically reducing reaction times (from days and hours to minutes and seconds) is just one of the many advantages. This Review highlights recent applications of controlled microwave heating in modern organic synthesis, and discusses some of the underlying phenomena and issues involved.

https://onlinelibrary.wiley.com/doi/pdf/10.1002/anie.200400655

Controlled microwave heating in modern organic synthesis.

The ability of platinum and gold catalysts to effect powerful atom-economic transformations has led to a marked increase in their utilization. The quite remarkable correlation of their catalytic behavior with the available structural data, coordination chemistry, and organometallic reactivity patterns, including relativistic effects, allows the underlying principles of catalytic carbophilic activation by π acids to be formulated. The spectrum of reactivity extends beyond their utility as catalytic and benign alternatives to conventional stoichiometric π acids. The resulting reactivity profile allows this entire field of catalysis to be rationalized, and brings together the apparently disparate electrophilic metal carbene and nonclassical carbocation explanations. The advances in coupling, cycloisomerization, and structural reorganization—from the design of new transformations to the improvement to known reactions—are highlighted in this Review. The application of platinum- and gold-catalyzed transformations in natural product synthesis is also discussed.

Catalytic Carbophilic Activation: Catalysis by Platinum and Gold π Acids

Gold salts and complexes have emerged in the past few years as the most powerful catalysts for electrophilic activation of alkynes toward a variety of nucleophiles under homogeneous conditions. In a simplified form, nucleophilic attack on the [AuL]-activated alkyne proceeds via π complexes 1 to give trans-alkenyl gold complexes of type 2 as intermediates (Scheme 1). This type of coordination is also a common theme in gold-catalyzed cycloisomerizations of enynes, in which the alkene function acts as the nucleophile. In the reaction of enynes with complexes of other transition metals, an Alder-ene cycloisomerization can take place by simultaneous coordination of the alkyne and the alkene to the metal followed by an oxidative cyclometalation. In contrast, this process does not occur for gold(I) since oxidative addition processes are not facile for this metal. 6 In addition, the [AuL] fragment, which is isolobal to H and HgL, adopts a linear coordination and binds to either the alkene or the alkyne. Thus, cycloisomerizations of enynes catalyzed by gold proceed by an initial coordination of the metal to the alkyne, and as illustrated in Scheme 2, the resulting complex 3 reacts with the alkene by either the 5-exo-dig or 6-endo-dig pathway to form the exoor endocyclopropyl gold carbene 4 or 5, respectively, as has been established with other electrophilic transition-metal complexes or halides MXn as catalysts. The proposed involvement of cyclopropyl metal carbenes of type 4 in the electrophilic activation of enynes by transition metals was first substantiated in reactions catalyzed by Pd(II), in which the initially formed cyclopropyl palladium carbenes undergo [4 + 2] cycloaddition with the double bond of the conjugate enyne. Strong evidence for the existence of cyclopropyl metal carbenes as intermediates was also obtained in the reaction of enynes bearing additional double bonds at the alkenyl chain with Ru(II) and Pt(II) catalysts. In these reactions, the cyclopropyl metal carbenes are trapped intramolecularly by the terminal alkene to give tetracycles containing two cyclopropanes. Gold(I) complexes usually surpass the reactivity shown by Pt(II) and other electrophilic metal salts and complexes for the activation of enynes. They are highly reactive yet uniquely selective Lewis acids that have a high affinity for π bonds. This high π-acidity is linked to relativistic effects, which reach a maximum in the periodic table with gold. However, on occasion, the stronger Lewis acidity of gold complexes can be detrimental in terms of selectivity and because of their low tolerance to certain functional groups. In these instances, the less-strongly Lewis acidic Pt(II) complexes could be the catalysts of choice. * To whom correspondence should be addressed. E-mail: aechavarren@ iciq.es. † Additional affiliation: Departamento de Quı́mica Orgánica, Universidad Autónoma de Madrid, Cantoblanco, 28049 Madrid, Spain. Scheme 1 Chem. Rev. 2008, 108, 3326–3350 3326

Gold-catalyzed cycloisomerizations of enynes: a mechanistic perspective.

The fascinating story of olefin (or alkene) metathesis (eq
1) began almost five decades ago, when Anderson and
Merckling reported the first carbon-carbon double-bond
rearrangement reaction in the titanium-catalyzed polymerization of norbornene. Nine years later, Banks and Bailey reported “a new disproportionation reaction . . . in which olefins are converted to homologues of shorter and longer carbon chains...”. In 1967, Calderon and co-workers named this metal-catalyzed redistribution of carbon-carbon double bonds olefin metathesis, from the Greek word “μeτάθeση”, which means change of position. These contributions have since served as the foundation for an amazing research field, and olefin metathesis currently represents a powerful transformation in chemical synthesis, attracting a vast amount of interest both in industry and academia.

https://core.ac.uk/download/pdf/4884240.pdf

Ruthenium-based heterocyclic carbene-coordinated olefin metathesis catalysts.

Exchange of one PCy3 unit of the classical Grubbs catalyst 1 by N-heterocyclic carbene (NHC) ligands leads to "second-generation" metathesis catalysts of superior reactivity and increased stability. Several complexes of this type have been prepared and fully characterized, six of them by X-ray crystallography. These include the unique chelate complexes 13 and 14 in which the NHC- and the Ru-CR entities are tethered to form a metallacycle. A particularly favorable design feature is that the reactivity of such catalysts can be easily adjusted by changing the electronic and steric properties of the NHC ligands. The catalytic activity also strongly depends on the solvent used; NMR investigations provide a tentative explanation of this effect. Applications of the "second-generation" catalysts to ring closing alkene metathesis and intramolecular enyne cycloisomerization reactions provide insights into their catalytic performance. From these comparative studies it is deduced that no single catalyst is optimal for different types of applications. The search for the most reactive catalyst for a specific transformation is facilitated by IR thermography allowing a rapid and semi-quantitative ranking among a given set of catalysts.

Comparative investigation of ruthenium-based metathesis catalysts bearing N-heterocyclic carbene (NHC) ligands.

PtCl2 constitutes an efficient and practical catalyst for a set of different atom economical rearrangement reactions of enynes. This includes (i) a formal enyne metathesis reaction delivering 1,3-dienes, (ii) the formation of polycyclic vinylcyclopropane derivatives, and (iii) an unprecedented O→C allyl shift reaction if unsaturated ethers are employed. Although these transformations produce significantly different structural motifs, they share a common mechanism comprising a cationic manifold triggered by the π-complexation of Pt(II) onto the alkyne unit of the substrates. Strong experimental support for the proposed mechanism comes from deuterium-labeling studies, a careful analysis of the product distribution pattern, and the fact that in some cases PtCl2 can be replaced by simple Lewis or Bronsted acids as the catalysts.

Platinum-Catalyzed Cycloisomerization Reactions of Enynes

Novel Rearrangements of Enynes Catalyzed by PtCl2

The first total synthesis of three naturally occurring cyclophane derivatives belonging to the turriane family of natural products is described. Their sterically hindered biaryl entity is formed by reaction of the Grignard reagent derived from aryl bromide 10 with the oxazoline derivative 18, and the macrocyclic tether of the targets is efficiently forged by ring closing metathesis. While conventional RCM catalyzed by the ruthenium-carbene complexes 33 or 34 invariably leads to the formation of mixtures of both stereoisomers with the undesirable (E)-alkene prevailing, ring closing alkyne metathesis (RCAM) followed by Lindlar reduction of the resulting cycloalkynes 37 and 38 opens a convenient and stereoselective entry into this class of compounds. RCAM can either be accomplished by using the tungsten alkylidyne complex [(tBuO)3 [triple bond] WCCMe3] or by means of a catalyst formed in situ from [Mo(CO)6] and para-trifluoromethylphenol. The latter method is significantly accelerated when carried out under microwave heating. Furthermore, the judicious choice of the protecting groups for the phenolic -OH functions turned out to be crucial. PMB-ethers were found to be compatible with the diverse reaction conditions en route to 3-5; their cleavage, however, had to be carried out under carefully optimized conditions to minimize competing O-C PMB migration. Turrianes 3-5 are shown to be potent DNA cleaving agents under oxidative conditions when administered in the presence of copper ions.

Frank Stelzer

Papers

Comparative investigation of ruthenium-based metathesis catalysts bearing N-heterocyclic carbene (NHC) ligands.

Platinum-Catalyzed Cycloisomerization Reactions of Enynes

Novel Rearrangements of Enynes Catalyzed by PtCl2

Total Synthesis of the Turrianes and Evaluation of Their DNA-Cleaving Properties

Platinum-Catalyzed Cycloisomerization Reactions of Enynes.