Solid-state switch-mode rectification converters have reached a matured level for improving power quality in terms of power-factor correction (PFC), reduced total harmonic distortion at input AC mains and precisely regulated DC output in buck, boost, buck-boost and multilevel modes with unidirectional and bidirectional power flow. This paper deals with a comprehensive review of improved power quality converters (IPQCs) configurations, control approaches, design features, selection of components, other related considerations, and their suitability and selection for specific applications. It is targeted to provide a wide spectrum on the status of IPQC technology to researchers, designers and application engineers working on switched-mode AC-DC converters. A classified list of more than 450 research publications on the state of art of IPQC is also given for a quick reference.

/pdf/a-review-of-single-phase-improved-power-quality-ac-dc-2pm6h4zjxq.pdf

A review of single-phase improved power quality AC-DC converters

This paper presents a comprehensive review on the unified power quality conditioner (UPQC) to enhance the electric power quality at distribution levels. This is intended to present a broad overview on the different possible UPQC system configurations for single-phase (two-wire) and three-phase (three-wire and four-wire) networks, different compensation approaches, and recent developments in the field. It is noticed that several researchers have used different names for the UPQC based on the unique function, task, application, or topology under consideration. Therefore, an acronymic list is developed and presented to highlight the distinguishing feature offered by a particular UPQC. In all 12 acronyms are listed, namely, UPQC-D, UPQC-DG, UPQC-I, UPQC-L, UPQC-MC, UPQC-MD, UPQC-ML, UPQC-P, UPQC-Q, UPQC-R, UPQC-S, and UPQC-VA. More than 150 papers on the topic are rigorously studied and meticulously classified to form these acronyms and are discussed in the paper.

Enhancing Electric Power Quality Using UPQC: A Comprehensive Overview

This paper presents a new synchronous-reference-frame (SRF)-based control method to compensate power-quality (PQ) problems through a three-phase four-wire unified PQ conditioner (UPQC) under unbalanced and distorted load conditions. The proposed UPQC system can improve the power quality at the point of common coupling on power distribution systems under unbalanced and distorted load conditions. The simulation results based on Matlab/Simulink are discussed in detail to support the SRF-based control method presented in this paper. The proposed approach is also validated through experimental study with the UPQC hardware prototype.

Synchronous-Reference-Frame-Based Control Method for UPQC Under Unbalanced and Distorted Load Conditions

It is well known that a PWM-controlled rectifier can offer advantages of reduced low-order harmonics and unity input power factor when compared to a conventional thyristor converter. However, theoretically optimum PWM strategies are often difficult to implement physically or are not easily extended to regenerative operation. The authors propose an alternative PWM strategy based on AC-AC matrix converter theory, which generates only high-order switching harmonics, presents a unity power factor load to the supply, implicitly extends to regeneration (and operation with a center tapped DC output), and is feasible to physically implement for real-time output voltage control. Both the theory and physical simulation results are presented. >

Implementation of a controlled rectifier using AC-AC matrix converter theory

This paper introduces a new concept of optimal utilization of a unified power quality conditioner (UPQC). The series inverter of UPQC is controlled to perform simultaneous 1) voltage sag/swell compensation and 2) load reactive power sharing with the shunt inverter. The active power control approach is used to compensate voltage sag/swell and is integrated with theory of power angle control (PAC) of UPQC to coordinate the load reactive power between the two inverters. Since the series inverter simultaneously delivers active and reactive powers, this concept is named as UPQC-S (S for complex power). A detailed mathematical analysis, to extend the PAC approach for UPQC-S, is presented in this paper. MATLAB/SIMULINK-based simulation results are discussed to support the developed concept. Finally, the proposed concept is validated with a digital signal processor-based experimental study.

UPQC-S: A Novel Concept of Simultaneous Voltage Sag/Swell and Load Reactive Power Compensations Utilizing Series Inverter of UPQC

https://arrow.tudublin.ie/cgi/viewcontent.cgi?article=1002&context=engscheleart2

Comparative evaluation of two models of UPQC for suitable interface to enhance power quality

The unified power quality conditioner (UPQC) is one of the major custom power solutions, which is capable of mitigating the effect of supply voltage sag at the load end or at the point of common coupling (PCC) in a distributed network. It also prevents the propagation of the load current harmonics to the utility and improves the input power factor of the load. The control of series compensator (SERC) of the UPQC is such that it injects voltage in quadrature advance to the supply current. Thus, the SERC consumes no active power at steady state. The other advantage of the proposed control scheme is that the SERC can share the lagging VAR demand of the load with the shunt compensator (SHUC) and can ease its loading. The UPQC employing this type of quadrature voltage injection in series is termed as UPQC-Q. The VA requirement issues of SERC and SHUCs of a UPQC-Q are discussed. A PC-based new hybrid control has been proposed and the performance of the UPQC-Q is verified in a laboratory prototype. The phasor diagram, control block diagram, simulations and experimental results are presented to confirm the validity of the theory.

/pdf/investigation-on-the-performance-of-upqc-q-for-voltage-sag-q0xa7xpqne.pdf

Investigation on the performance of UPQC-Q for voltage sag mitigation and power quality improvement at a critical load point

A mixed-mode input current sensorless predictive current control at constant but two different switching frequencies for a single-phase boost type switch-mode rectifier (SMR) with single switch topology is proposed. The SMR operates in continuous input current mode (CCM) or in discontinuous input current mode (DCM) depending upon the load. This load dependent operating mode selection avoids the operation of the SMR in the dual mode, where the input current harmonic distortion is maximum. The closed loop output voltage regulation is achieved without the need of an input current sensor. The control scheme is optimized to result in an economic size of the boost inductor along with the compliance of IEC 1000-3-2 harmonic limits for input current.

Mixed-mode operation of boost switch-mode rectifier for wide range of load variations

Unified power quality conditioner (UPQC) is one of the major custom power solutions that is capable of mitigating the effect of supply voltage sag at the load end or the point of common coupling (PCC). It also prevents load current harmonics from entering the utility and corrects the input power factor of the load. The control of series compensator is such that it injects voltage in quadrature advance to the supply current, so that no active power is consumed by the series compensator at steady state. The UPQC employing this type of quadrature voltage injection in series is termed UPQC-Q. The present paper discusses the VA requirement issues of series and shunt compensators of UPQC-Q and its performance is verified in a laboratory prototype. The phasor diagram, control block diagram and typical experimental results are presented to confirm the validity of the theory.

Performance study of UPQC-Q for load compensation and voltage sag mitigation

A unified power quality conditioner (UPQC) is proposed in this paper. It protects the consumer at the load end from supply voltage sag, and provides unity power factor condition at the utility for different values of load power factor. A PC-based closed loop control scheme is proposed and experimental investigation is carried out in the laboratory. Selected experimental results are reported along with control circuit and phasor diagram to validate the proposition.

/pdf/experimental-investigation-of-performance-of-a-single-phase-1057rz2myt.pdf

G.K. Dubey

Papers

Comparative evaluation of two models of UPQC for suitable interface to enhance power quality

Investigation on the performance of UPQC-Q for voltage sag mitigation and power quality improvement at a critical load point

Mixed-mode operation of boost switch-mode rectifier for wide range of load variations

Performance study of UPQC-Q for load compensation and voltage sag mitigation

Experimental investigation of performance of a single phase UPQC for voltage sensitive and non-linear loads