Metamaterials are artificially fabricated materials that allow for the control of light and acoustic waves in a manner that is not possible in nature. This Review covers the recent developments in the study of so-called metasurfaces, which offer the possibility of controlling light with ultrathin, planar optical components. Conventional optical components such as lenses, waveplates and holograms rely on light propagation over distances much larger than the wavelength to shape wavefronts. In this way substantial changes of the amplitude, phase or polarization of light waves are gradually accumulated along the optical path. This Review focuses on recent developments on flat, ultrathin optical components dubbed 'metasurfaces' that produce abrupt changes over the scale of the free-space wavelength in the phase, amplitude and/or polarization of a light beam. Metasurfaces are generally created by assembling arrays of miniature, anisotropic light scatterers (that is, resonators such as optical antennas). The spacing between antennas and their dimensions are much smaller than the wavelength. As a result the metasurfaces, on account of Huygens principle, are able to mould optical wavefronts into arbitrary shapes with subwavelength resolution by introducing spatial variations in the optical response of the light scatterers. Such gradient metasurfaces go beyond the well-established technology of frequency selective surfaces made of periodic structures and are extending to new spectral regions the functionalities of conventional microwave and millimetre-wave transmit-arrays and reflect-arrays. Metasurfaces can also be created by using ultrathin films of materials with large optical losses. By using the controllable abrupt phase shifts associated with reflection or transmission of light waves at the interface between lossy materials, such metasurfaces operate like optically thin cavities that strongly modify the light spectrum. Technology opportunities in various spectral regions and their potential advantages in replacing existing optical components are discussed.

Flat Optics With Designer Metasurfaces

The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.

http://ieeexplore.ieee.org/iel5/6354/16969/00781867.pdf

Photonic crystals

Micromachines can be created with higher resolution using two-photon absorption.

Finer features for functional microdevices

Hydrogels have been developed to respond to a wide variety of stimuli, but their use in macroscopic systems has been hindered by slow response times (diffusion being the rate-limiting factor governing the swelling process) However, there are many natural examples of chemically driven actuation that rely on short diffusion paths to produce a rapid response It is therefore expected that scaling down hydrogel objects to the micrometre scale should greatly improve response times At these scales, stimuli-responsive hydrogels could enhance the capabilities of microfluidic systems by allowing self-regulated flow control Here we report the fabrication of active hydrogel components inside microchannels via direct photopatterning of a liquid phase Our approach greatly simplifies system construction and assembly as the functional components are fabricated in situ, and the stimuli-responsive hydrogel components perform both sensing and actuation functions We demonstrate significantly improved response times (less than 10 seconds) in hydrogel valves capable of autonomous control of local flow

Functional hydrogel structures for autonomous flow control inside microfluidic channels

4. Survey of Novel Multiphoton Active Materials 1257 4.1. Multiphoton Absorbing Systems 1257 4.2. Organic Molecules 1257 4.3. Organic Liquids and Liquid Crystals 1259 4.4. Conjugated Polymers 1259 4.4.1. Polydiacetylenes 1261 4.4.2. Polyphenylenevinylenes (PPVs) 1261 4.4.3. Polythiophenes 1263 4.4.4. Other Conjugated Polymers 1265 4.4.5. Dendrimers 1265 4.4.6. Hyperbranched Polymers 1267 4.5. Fullerenes 1267 4.6. Coordination and Organometallic Compounds 1271 4.6.1. Metal Dithiolenes 1271 4.6.2. Pyridine-Based Multidentate Ligands 1272 4.6.3. Other Transition-Metal Complexes 1273 4.6.4. Lanthanide Complexes 1275 4.6.5. Ferrocene Derivatives 1275 4.6.6. Alkynylruthenium Complexes 1279 4.6.7. Platinum Acetylides 1279 4.7. Porphyrins and Metallophophyrins 1279 4.8. Nanoparticles 1281 4.9. Biomolecules and Derivatives 1282 5. Nonlinear Optical Characterizations of Multiphoton Active Materials 1282

Multiphoton Absorbing Materials : Molecular Designs, Characterizations, and Applications

Two-photon excitation provides a means of activating chemical or physical processes with high spatial resolution in three dimensions and has made possible the development of three-dimensional fluorescence imaging1, optical data storage2,3 and lithographic microfabrication4,5,6. These applications take advantage of the fact that the two-photon absorption probability depends quadratically on intensity, so under tight-focusing conditions, the absorption is confined at the focus to a volume of order λ3 (where λ is the laser wavelength). Any subsequent process, such as fluorescence or a photoinduced chemical reaction, is also localized in this small volume. Although three-dimensional data storage and microfabrication have been illustrated using two-photon-initiated polymerization of resins incorporating conventional ultraviolet-absorbing initiators, such photopolymer systems exhibit low photosensitivity as the initiators have small two-photon absorption cross-sections (δ). Consequently, this approach requires high laser power, and its widespread use remains impractical. Here we report on a class of π;-conjugated compounds that exhibit large δ (as high as 1, 250 × 10−50 cm4 s per photon) and enhanced two-photon sensitivity relative to ultraviolet initiators. Two-photon excitable resins based on these new initiators have been developed and used to demonstrate a scheme for three-dimensional data storage which permits fluorescent and refractive read-out, and the fabrication of three-dimensional micro-optical and micromechanical structures, including photonic-bandgap-type structures7.

Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication

Two-photon excitation provides a means of activating chemical or physical processes with high spatial resolution in three dimensions and has made possible the development of three-dimensional fluorescence imaging, optical data storage, and lithographic microfabrication. These applications take advantage of the fact that the two-photon absorption probability depends quadratically on intensity, so under tight-focusing conditions, the absorption is confined at the focus to a volume of order λ3 (where λ is the laser wavelength). Any subsequent process, such as fluorescence or a photoinduced chemical reaction, is also localized in this small volume. Although three-dimensional data storage and microfabrication have been illustrated using two-photon-initiated polymerization of resins incorporating conventional ultraviolet-absorbing initiators, such photopolymer systems exhibit low photosensitivity as the initiators have small two-photon absorption cross-sections (δ). Consequently, this approach requires high laser power, and its widespread use remains impractical. Here we report on a class of π;-conjugated compounds that exhibit large δ (as high as 1, 250 × 10−50 cm4 s per photon) and enhanced two-photon sensitivity relative to ultraviolet initiators. Two-photon excitable resins based on these new initiators have been developed and used to demonstrate a scheme for three-dimensional data storage which permits fluorescent and refractive read-out, and the fabrication of three-dimensional micro-optical and micromechanical structures, including photonic-bandgap-type structures.

Summary form only given. Two-photon excitation provides a means of activating chemical or physical processes with high spatial resolution in three dimensions and has enabled the development of 3D fluorescence imaging, 3D optical data storage, and 3D lithographic microfabrication. Each of these applications takes advantage of the fact that the two-photon absorption probability depends quadratically on intensity, and therefore under tight-focusing conditions, the absorption is confined at the focus to a volume of order /spl lambda//sup 3/, where /spl lambda/ is the laser wavelength. Any subsequent process, such as fluorescence or a photo-induced chemical reaction, is also localized in this small volume. For instance, two-photon excitation can initiate conventional reactions such as side-group deprotection, radical generation, and polymerization, through energy transfer or electron transfer. However, the efficiency of such processes depends critically on the strength of the chromophore's two-photon absorptivity. We have developed a wide array of chromophores which hold great promise for 3D optical data storage and 3D microfabrication. These materials are based on donor-/spl pi/-donor, donor-acceptor-donor, or acceptor-donor-acceptor structural motifs.

I.-Y. Sandy Lee

Papers

Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication

Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication

Two-photon polymerization initiators for efficient three-dimensional optical data storage and microfabrication