Surface Plasmon Resonance Optical Sensor: A Review on Light Source Technology

Periodic plasmonic nanostructures are being widely studied, optimized, and developed to produce a new generation of low-cost and efficient chemical sensors and biosensors. The extensive variety of nanostructures, interrogation approaches, and setups makes a direct comparison of the reported performance from different sensing platforms a challenging exercise. In this feature Article, the most common parameters used for the evaluation of plasmonic nanostructures will be reviewed, with particular focus on the advances in periodic plasmonic nanostructures. Recent progress in the fabrication methods that allow for the high-volume production of periodic plasmonic sensors at low cost will be described, together with an assessment of the state of the art in terms of periodic structures employed for chemical sensing.

/pdf/periodic-metallic-nanostructures-as-plasmonic-chemical-16ua988po8.pdf

Periodic Metallic Nanostructures as Plasmonic Chemical Sensors

In recent years, nanoplasmonic sensors have become widely used for the label-free detection of biomolecules across medical, biotechnology, and environmental science applications. To date, many nanoplasmonic sensing strategies have been developed with outstanding measurement capabilities, enabling detection down to the single-molecule level. One of the most promising directions has been surface-based nanoplasmonic sensors, and the potential of such technologies is still emerging. Going beyond detection, surface-based nanoplasmonic sensors open the door to enhanced, quantitative measurement capabilities across the biointerfacial sciences by taking advantage of high surface sensitivity that pairs well with the size of medically important biomacromolecules and biological particulates such as viruses and exosomes. The goal of this review is to introduce the latest advances in nanoplasmonic sensors for the biointerfacial sciences, including ongoing development of nanoparticle and nanohole arrays for exploring different classes of biomacromolecules interacting at solid–liquid interfaces. The measurement principles for nanoplasmonic sensors based on utilizing the localized surface plasmon resonance (LSPR) and extraordinary optical transmission (EOT) phenomena are first introduced. The following sections are then categorized around different themes within the biointerfacial sciences, specifically protein binding and conformational changes, lipid membrane fabrication, membrane–protein interactions, exosome and virus detection and analysis, and probing nucleic acid conformations and binding interactions. Across these themes, we discuss the growing trend to utilize nanoplasmonic sensors for advanced measurement capabilities, including positional sensing, biomacromolecular conformation analysis, and real-time kinetic monitoring of complex biological interactions. Altogether, these advances highlight the rich potential of nanoplasmonic sensors and the future growth prospects of the community as a whole. With ongoing development of commercial nanoplasmonic sensors and analytical models to interpret corresponding measurement data in the context of biologically relevant interactions, there is significant opportunity to utilize nanoplasmonic sensing strategies for not only fundamental biointerfacial science, but also translational science applications related to clinical medicine and pharmaceutical drug development among countless possibilities.

Nanoplasmonic sensors for biointerfacial science

The integration of nanohole array based plasmonic sensors into microfluidic systems has enabled the emergence of platforms with unique capabilities and a diversified palette of applications. Recent advances in fabrication techniques together with novel implementation schemes have influenced the progress of these optofluidic platforms. Here, we review the advances that nanohole array based sensors have experienced since they were first merged with microfluidics. We examine established and new fabrication methodologies that have enabled both the fabrication of nanohole arrays with improved optical attributes and a reduction in manufacturing costs. The achievements of several platforms developed to date and the significant benefits obtained from operating the nanoholes as nanochannels are also reviewed herein. Finally, we discuss future opportunities for on-chip nanohole array sensors by outlining potential applications and the use of the abilities of the nanostructures beyond the optical context.

/pdf/on-chip-nanohole-array-based-sensing-a-review-4ytmd2eu29.pdf

On-chip nanohole array based sensing: a review

The integration of fluidics and optics, as in flow-through nanohole arrays, has enabled increased transport of analytes to sensing surfaces. Limits of detection, however, are fundamentally limited by local analyte concentration. We employ the nanohole array geometry and the conducting nature of the film to actively concentrate analyte within the sensor. We achieve 180-fold enrichment of a dye, and 100-fold enrichment and simultaneous sensing of a protein in less than 1 min. The method presents opportunities for an order of magnitude increase in sensing speed and 2 orders of magnitude improvement in limit of detection.

/pdf/optofluidic-concentration-plasmonic-nanostructure-as-52azguva4g.pdf

Optofluidic Concentration: Plasmonic Nanostructure as Concentrator and Sensor

In this paper, we demonstrate a compact integrated nanohole array-based surface plasmon resonance sensing device. The unit includes a LED light source, driving circuitry, CCD detector, microfluidic network and computer interface, all assembled from readily available commercial components. A dual-wavelength LED scheme was implemented to increase spectral diversity and isolate intensity variations to be expected in the field. The prototype shows bulk sensitivity of 266 pixel intensity units/RIU and a limit of detection of 6 ? 10?4 RIU. Surface binding tests were performed, demonstrating functionality as a surface-based sensing system. This work is particularly relevant for low-cost point-of-care applications, especially those involving multiple tests and field studies. While nanohole arrays have been applied to many sensing applications, and their suitability to device integration is well established, this is the first demonstration of a fully integrated nanohole array-based sensing device.

/pdf/integrated-nanohole-array-surface-plasmon-resonance-sensing-5a4q42eiz0.pdf

Integrated nanohole array surface plasmon resonance sensing device using a dual-wavelength source

Extraordinary optical transmission through nanohole arrays in metal films shows enhanced performance in surface
plasmon resonance sensing, and efforts to develop this technology have been undertaken by many research groups
worldwide. The challenge is to integrate a nanohole array sensor into a handheld design that is compact, cost effective,
and capable of multiplexing. A number of implementations have been suggested, using components such as lasers and
spectrometers, but these designs are often bulky, expensive and unacceptably noisy. We have developed an approach
that is simple, inexpensive and reliable: an integrated handheld SPR imaging sensing platform using the nanohole array
chip as the sensing element, a two-color LED source for spectral diversity, and a CCD module for multiplexed detection.
A PDMS microfluidic chip made by conventional photolithographic techniques is assembled with the nanohole arrays
and incorporated into the integrated module in order to transport the testing solutions, which offers the flexibility for
future multiplexing. Results of preliminary tests show surface binding detection and have been promising.

J. Campbell

Papers

Integrated nanohole array surface plasmon resonance sensing device using a dual-wavelength source

Handheld nanohole array surface plasmon resonance sensing platform