We investigate the average power scaling of two diode-pumped Yb-doped fiber amplifiers emitting a diffraction-limited beam. The first fiber under investigation with a core diameter of 30 µm was able to amplify a 10 W narrow linewidth seed laser up to 2.8 kW average output power before the onset of transverse mode instabilities (TMI). A further power scaling was achieved using a second fiber with a smaller core size (23µm), which allowed for a narrow linewidth output power of 3.5 kW limited by stimulated Brillouin scattering (SBS). We mitigated SBS using a spectral broadening mechanism, which allowed us to further increase the output power to 4.3 kW only limited by the available pump power. Up to this power level, a high slope efficiency of 90% with diffraction-limited beam quality and without any sign of TMI or stimulated Raman scattering for a spectral dynamic range of higher than -80 dB was obtained.

Single mode 4.3 kW output power from a diode-pumped Yb-doped fiber amplifier.

Over the past two decades, fiber laser technologies have matured to such an extent that they have captured a large portion of the commercial laser marketplace. Yet, there still is a seemingly unquenchable thirst for ever greater optical power to levels where certain deleterious light-matter interactions that limit continued power scaling become significant. In the past decade or so, the industry has focused mainly on waveguide engineering to overcome many of these hurdles. However, there is an emerging body of work emphasizing the enabling role of the material. In an effort to underpin these developments, this paper reviews the relevance of the material in high power fiber laser technologies. As the durable material-of-choice for the application, the discussion will mainly be limited to silicate host glasses. The discussion presented herein follows an outward path, starting with the trivalent rare earth ions and their spectroscopic properties. The ion then is placed into a host, whose impact on the spectroscopy is reviewed. Finally, adverse interactions between the laser lightwave and the host are discussed, and novel composition glass fiber design and fabrication methodologies are presented. With deference to the symbiosis required between material and waveguide engineering in active fiber development, this review will emphasize the former. Specifically, where appropriate, materials-based paths to the enhancement of laser performance will be underscored.

/pdf/materials-for-optical-fiber-lasers-a-review-2n45z3gaeq.pdf

Materials for optical fiber lasers: A review

This work presents a review on the effect of transverse mode instability in high-power fiber laser systems and the corresponding investigations led worldwide over the past decade. This paper includes a description of the experimental observations and the physical origin of this effect, as well as some of the proposed mitigation strategies.

Transverse mode instability

We present comprehensive theoretical study of mode instability with a universal model for the first time, which includes quantitative study on the various influence factors and mitigation methods. With large numerical results, the influence of various fiber and system parameters has been studied to summarize mitigation methods. The mode instability threshold behavior of multiwavelength pumping configurations has been studied for the first time, and the influence of pump wavelength shifting in the tandem pumping technique and amplitude modulation have also been given for the first time. The mitigation methods are discussed with review of the latest development in experimental results. The drawbacks and possible overcome measures are also discussed. By properly combining the mitigation methods, an approach to achieve beyond 10-kW diode pumped fiber laser with near diffraction limited beam quality has been proposed, which provides a creative way to overcome the mode instability limitation on diode pumped fiber lasers, and demonstrates the effectiveness of the mitigation methods.

Comprehensive Theoretical Study of Mode Instability in High-Power Fiber Lasers by Employing a Universal Model and Its Implications

Suppressing mode instabilities (MI) by optimizing the fiber coiling methods has been studied numerically. By employing our semi-analytical model, the MI threshold of two typical high power fibers in various coiling methods has been calculated. It reveals that fiber laser systems with gain fibers being coiled in cylinder shape has higher MI threshold than those with gain fibers being coiled in spiral shape, and MI-free output power of fiber lasers can be scaled up to above 3 kW even with the typical commercial fibers in the co-pumped configurations.

http://iopscience.iop.org/article/10.1088/1612-202X/aa4fbf/pdf

Suppressing mode instabilities by optimizing the fiber coiling methods

We report on a newly designed and fabricated ytterbium-doped large mode area fiber with an extremely low NA (~0.04) and related systematic investigations on fiber parameters that crucially influence the mode instability threshold. The fiber is used to demonstrate a narrow linewidth, continuous wave, single mode fiber laser amplifier emitting a maximum output power of 3 kW at a wavelength of 1070 nm without reaching the mode-instability threshold. A high slope efficiency of 90 %, excellent beam quality, high temporal stability, and an ASE suppression of 70 dB could be reached with a signal linewidth of only 170 pm.

J Ihring

Papers

Narrow linewidth, single mode 3 kW average power from a directly diode pumped ytterbium-doped low NA fiber amplifier