The Pharmacological Basis of Therapeutics A Textbook of Pharmacology, Toxicology and Therapeutics for Physicians and Medical Students. By Prof. Louis Goodman and Prof. Alfred Gilman. Pp. xiii + 1383. (New York: The Macmillan Company, 1941.) 50s. net.

The Pharmacological Basis of Therapeutics

Chem. Pharm. Bull.(オピニオン)

This literature review is a compilation of the composition and, in most cases, the preparation instructions for simulated biological fluids that may be used as dissolution media in the evaluation of dissolution profiles and amount of drug released from pharmaceutical dosage forms. The use of simulated biological fluids can give a better understanding of the release mechanisms and possible in vivo behavior of a product and enhance the predictive capability of the dissolution testing. A summary of the major characteristics of the most used routes of administration that may affect dissolution and absorption of drug substances is presented. The routes and simulated biological fluids covered by this review are: • Parenteral: simulated body fluid and simulated synovial fluid. • Oral: fasted-state simulated gastric fluid, fed-state simulated gastric fluid, fasted-state simulated intestinal fluid, fed-state simulated intestinal fluid, simulated colonic fluid, fasted-state simulated colonic fluid, and fed-state simulated colonic fluid. • Buccal and sublingual: simulated saliva. • Pulmonary: simulated lung fluid. • Vaginal: simulated vaginal fluid and simulated semen. • Ophthalmic: simulated tears. Simulated sweat is also included. Some examples of how these simulated biological fluids are used to evaluate dosage forms are included in each route of administration. INTRODUCTION Until some decades ago, most of the conventional pharmaceutical dosage forms were essentially injections, oral formulations (solutions, suspensions, tablets, and capsules), topical creams, and ointments. With the progress of drug delivery technology, novel dosage forms have been developed to overcome the problems associated with conventional drug delivery. Research has been directed toward the use of alternatives to the parenteral route for drugs that cannot be delivered orally. Potential alternative portals of drug entry to the systemic circulation include buccal, sublingual, nasal, pulmonary, and vaginal routes, among others. These routes of administration are also used for the local delivery of drugs directly to the site of action, with consequent reduction in the dose needed to produce a pharmacological effect, eliminating problems related to first-pass metabolism and possibly minimizing systemic side effects (1). An important application of dissolution testing is the prediction of in vivo performance of pharmaceutical dosage forms. The media typically used for quality control dissolution testing do not represent all aspects of the physiological conditions of the most used routes of administration and do not allow correlation with in vivo data. Prediction of dosage form performance in the site where most of the absorption occurs requires adequate simulation of the in vivo conditions. This paper describes some characteristics of the parenteral, oral, buccal and sublingual, pulmonary, ophthalmic, and vaginal routes that are important to consider when developing simulated media. A compilation of the composition and preparation of several simulated biological fluids, including simulated sweat, with potential use as dissolution media is presented. PARENTERAL ROUTE The most used routes of injection are intramuscular, intravenous, and subcutaneous and are normally associated with short-term effects. Novel implant devices that can adequately control drug release and provide a prolonged duration of effect have been developed (1). To evaluate the in vitro drug release from these dosage forms, the dissolution medium should have ion concentrations almost equal to those of the human plasma. Table 1 describes the ionic composition of simulated body fluid (SBF) and human blood plasma. Simulated body fluid was developed initially to evaluate the surface structural changes of glass-ceramics used to manufacture artificial vertebrae, ileum, tooth roots (2), and bioactive material used to repair hard tissues such as artificial middle-ear bone and maxillofacial implants (3). This simulated body fluid was prepared using the reagents listed in Table 2. These reagents were added to 700 mL of water in the order given in Table 2, one by one, after each reagent was completely dissolved. The pH was adjusted to 7.4 with 1 M *Corresponding author. diss-18-03-03.indd 15 8/31/2011 3:22:15 PM dx.doi.org/10.14227/DT180311P15

/pdf/simulated-biological-fluids-with-possible-application-in-3bqpblowoq.pdf

Simulated Biological Fluids with Possible Application in Dissolution Testing

This article reviews the recent trends, developments, and future applications of bio-based polymers produced from renewable resources. Bio-based polymers are attracting increased attention due to environmental concerns and the realization that global petroleum resources are finite. Bio-based polymers not only replace existing polymers in a number of applications but also provide new combinations of properties for new applications. A range of bio-based polymers are presented in this review, focusing on general methods of production, properties, and commercial applications. The review examines the technological and future challenges discussed in bringing these materials to a wide range of applications, together with potential solutions, as well as discusses the major industry players who are bringing these materials to the market.

/pdf/current-progress-on-bio-based-polymers-and-their-future-1tqmkeshuf.pdf

Current progress on bio-based polymers and their future trends

Cyclodextrins are a family of cyclic oligosaccharides with a hydrophilic outer surface and a lipophilic central cavity. Cyclodextrin molecules are relatively large with a number of hydrogen donors and acceptors and, thus, in general they do not permeate lipophilic membranes. In the pharmaceutical industry cyclodextrins have mainly been used as complexing agents to increase aqueous solubility of poorly soluble drugs, and to increase their bioavailability and stability. Studies in both humans and animals have shown that cyclodextrins can be used to improve drug delivery from almost any type of drug formulation. However, the addition of cyclodextrins to existing formulations without further optimisation will seldom result in acceptable outcome. Currently there are approximately 30 different pharmaceutical products worldwide containing drug/cyclodextrin complexes on the market.

Cyclodextrins in drug delivery

Polymeric nanoparticulate system: a potential approach for ocular drug delivery.

Chitosan coated sodium alginate-chitosan nanoparticles loaded with 5-FU for ocular delivery: in vitro characterization and in vivo study in rabbit eye.

Gellan gum has been reported to have wide pharmaceutical applications such as tablet binder, disintegrant, gelling agent and as a controlled release polymer. Multiparticulate delivery systems spread out more uniformly in the gastrointestinal tract and reduce the local irritation. The purpose of this study is to explore possible applicability of gellan macro beads as an oral controlled release system of a sparingly soluble drug, amoxicillin. Gellan gum beads were prepared by ionotropic gelation with calcium ions. The effect of drug loading, stirring time, polymer concentration, electrolyte (CaCl2) concentration, curing time etc. influencing the preparation of the gellan gum macro beads and the drug release from gellan gum beads were investigated in this study. Optimal preparation conditions allowed very high incorporation efficiency for amoxicillin (91%) The release kinetics of amoxicillin from gellan beads followed the diffusion model for an inert porous matrix in the order: 0.1 N HCl > phosphate buffer > distilled water. Change in curing time did not significantly affect the release rate constant, but drug concentration, polymer concentration and electrolyte concentration significantly affect the release rate of amoxicillin from the beads. The gellan macro beads may be suitable for gastro retentive controlled delivery of amoxicillin.

Formulation of controlled release gellan gum macro beads of amoxicillin

An oral sustained release dosage form of cinnarizine HCl (CNZ) based on gastric floating matrix tablets was studied. The release of CNZ from different floating matrix formulations containing four viscosity grades of hydroxypropyl methylcellulose, sodium alginate or polyethylene oxide, and gas-forming agent (sodium bicarbonate or calcium carbonate) was studied in simulated gastric fluid (pH 1.2). CNZ release data from the matrix tablets were analyzed kinetically using Higuchi, Peppas, Weibull, and Vergnaud models. From water uptake, matrix erosion studies, and drug release data, the overall release mechanism can be explained as a result of rapid hydration of polymer on the surface of the floating tablet and formation of a gel layer surrounding the matrix that controls water penetration into its center. On the basis of in vitro release data, batch HP1 (CNZ, HPMC-K100LV, SBC, LTS, and MgS) was subjected to bioavailability studies in rabbits and was compared with CNZ suspension. It was concluded that the greater bioavailability of HP1 was due to its longer retention in the gastric environment of the test animal. Batch no. HP1 of floating tablet in rabbits demonstrated that the floating tablet CNZ could be a 24-h sustained release formulation.

In vitro release kinetics and bioavailability of gastroretentive cinnarizine hydrochloride tablet.

The poor bioavailability and therapeutic response exhibited by the conventional ophthalmic solutions due to precorneal elimination of the drug may be overcome by the use of in situ gel forming systems that are instilled as drops into the eye and undergo a sol-gel transition in the cul-de-sac. Our present work describes the formulation and evaluation of an ophthalmic delivery system of an antibacterial agent, CPH, based on the concept of ion-activated in situ gelation. Gelrite gellan gum, a novel ophthalmic vehicle that gels in the presence of mono or divalent cations, present in the lacrimal fluid was used alone and in combinations with sodium alginate as the gelling agent. The developed formulations were therapeutically efficacious and provided sustained release of the drug over an 8-hr period in vitro.

J. K. Pandit

Papers

Polymeric nanoparticulate system: a potential approach for ocular drug delivery.

Chitosan coated sodium alginate-chitosan nanoparticles loaded with 5-FU for ocular delivery: in vitro characterization and in vivo study in rabbit eye.

Formulation of controlled release gellan gum macro beads of amoxicillin

In vitro release kinetics and bioavailability of gastroretentive cinnarizine hydrochloride tablet.

Ion-activated in situ gelling systems for sustained ophthalmic delivery of ciprofloxacin hydrochloride.