This critical review provides a processing-structure-property perspective on recent advances in cellulose nanoparticles and composites produced from them. It summarizes cellulose nanoparticles in terms of particle morphology, crystal structure, and properties. Also described are the self-assembly and rheological properties of cellulose nanoparticle suspensions. The methodology of composite processing and resulting properties are fully covered, with an emphasis on neat and high fraction cellulose composites. Additionally, advances in predictive modeling from molecular dynamic simulations of crystalline cellulose to the continuum modeling of composites made with such particles are reviewed (392 references).

/pdf/cellulose-nanomaterials-review-structure-properties-and-2z8x922p3v.pdf

Cellulose nanomaterials review: structure, properties and nanocomposites

This work presents the analytic and experimental development of piezoelectric actuators as elements of intelligent structures, i.e., structures with highly distributed actuators, sensors, and processing networks. Static and dynamic analytic models are derived for segmented piezoelectric actuators that are either bonded to an elastic substructure or embedded in a laminated composite. These models lead to the ability to predict, a priori, the response of the structural member to a command voltage applied to the piezoelectric and give guidance as to the optimal location for actuator placement. A scaling analysis is performed to demonstrate that the effectiveness of piezoelectric actuators is independent of the size of the structure and to evaluate various piezoelectric materials based on their effectiveness in transmitting strain to the substructure. Three test specimens of cantilevered beams were constructed: an aluminum beam with surface-bonded actuators, a glass/epoxy beam with embedded actuators, and a graphite/epoxy beam with embedded actuators. The actuators were used to excite steady-state resonant vibrations in the cantilevered beams. The response of the specimens compared well with those predicted by the analytic models. Static tensile tests performed on glass/epoxy laminates indicated that the embedded actuator reduced the ultimate strength of the laminate by 20%, while not significantly affecting the global elastic modulus of the specimen.

Use of piezoelectric actuators as elements of intelligent structures

This paper provides an overview of recent progress made in the area of cellulose nanofibre-based nanocomposites. An introduction into the methods used to isolate cellulose nanofibres (nanowhiskers, nanofibrils) is given, with details of their structure. Following this, the article is split into sections dealing with processing and characterisation of cellulose nanocomposites and new developments in the area, with particular emphasis on applications. The types of cellulose nanofibres covered are those extracted from plants by acid hydrolysis (nanowhiskers), mechanical treatment and those that occur naturally (tunicate nanowhiskers) or under culturing conditions (bacterial cellulose nanofibrils). Research highlighted in the article are the use of cellulose nanowhiskers for shape memory nanocomposites, analysis of the interfacial properties of cellulose nanowhisker and nanofibril-based composites using Raman spectroscopy, switchable interfaces that mimic sea cucumbers, polymerisation from the surface of cellulose nanowhiskers by atom transfer radical polymerisation and ring opening polymerisation, and methods to analyse the dispersion of nanowhiskers. The applications and new advances covered in this review are the use of cellulose nanofibres to reinforce adhesives, to make optically transparent paper for electronic displays, to create DNA-hybrid materials, to generate hierarchical composites and for use in foams, aerogels and starch nanocomposites and the use of all-cellulose nanocomposites for enhanced coupling between matrix and fibre. A comprehensive coverage of the literature is given and some suggestions on where the field is likely to advance in the future are discussed.

/pdf/review-current-international-research-into-cellulose-vduhai1vrx.pdf

Review: current international research into cellulose nanofibres and nanocomposites

Hexagonal ferrites: A review of the synthesis, properties and applications of hexaferrite ceramics

The numerical implementation of the model of brittle fracture developed in Francfort and Marigo (1998. J. Mech. Phys. Solids 46 (8), 1319–1342) is presented. Various computational methods based on variational approximations of the original functional are proposed. They are tested on several antiplanar and planar examples that are beyond the reach of the classical computational tools of fracture mechanics.

Numerical experiments in revisited brittle fracture

Entire texts are needed to discuss shell vibrations in their entirety. In this Chapter, axially symmetric vibrations are discussed first so that through their simplicity, it is easy to see how static equations are easily transformed to dynamic equations, and to show the relation to the vibrations of beams: with and without an elastic foundation. Next, the general vibration characteristic of shells are shown through the study of cylindrical shells, also relating the behavior to beam vibrations. Through the work of Koga, only five types of boundary conditions are needed to study any and all boundary conditions. Next, the time portion of dynamic loads is presented in an easy to use manner to study impact response of shells. Finally, the important areas of shells vibrating in beam modes is studied, using two different approaches. This chapter and the references given provide a background for further study of shell vibrations. In Chapter 21, the vibrations of composite shells is discussed and could be studied upon completing this Chapter.

Vibration of Isotropic Shells

A finite cylindrical element method is formulated. This method effectively reduces the three-dimensional problem to a one-dimensional problem. The method is illustrated by the study of a thick-walled cylindrical shell composed of graphite/epoxy, with a (90 o 5 /0 o 5 /90 o 5 ) 8 stacking sequence, subjected to an external uniform pressure

Stress analyses of laminated thick-walled cylindrical anisotropic shells

During the period between 1993 and 2004, the author, as well as some colleagues and graduate students, had the honor to be supported by the Office of Naval Research to conduct research in several aspects of the behavior of structures composed of composite materials. The topics involved in this research program were numerous, but all contributed to increasing the understanding of how various structures that are useful for marine applications behaved. More specifically, the research topics focused on the reaction of structures that were made of fiber reinforced polymer matrix composites when subjected to various loads and environmental conditions. This included the behavior of beam, plate/panel and shell structures. It involved studies that are applicable to fiberglass, graphite/carbon and Kevlar fibers imbedded in epoxy, polyester and other polymeric matrices. Unidirectional, cross-ply, angle ply, and woven composites were involved, both in laminated, monocoque as well as in sandwich constructions. Mid-plane symmetric as well as asymmetric laminates were studied, the latter involving bending-stretching coupling and other couplings that only can be achieved with advanced composite materials. The composite structures studied involved static loads, dynamic loading, shock loading as well as thermal and hygrothermal environments. One major consideration was determining the mechanical properties of composite materials subjected to high strain rates because the mechanical properties vary so significantly as the strain rate increases. A considerable number of references are cited for further reading and study for those interested.

On the Mechanical Behavior of Advanced Composite Material Structures

Buckling of Isotropic Columns and Plates

Over and above the determination of stresses and displacements in shell structures, under some loadings the question of elastic stability of a shell arises, just as it does in plates and columns, which were discussed in Chapter 7.

Jack R. Vinson

Papers

Vibration of Isotropic Shells

Stress analyses of laminated thick-walled cylindrical anisotropic shells

On the Mechanical Behavior of Advanced Composite Material Structures

Buckling of Isotropic Columns and Plates

Elastic Stability of Shells