Nanotechnology is a promising field of interdisciplinary research. It opens up a wide array of opportunities in various fields like medicine, pharmaceuticals, electronics and agriculture. The potential uses and benefits of nanotechnology are enormous. The current global population is nearly 7 */billion with 50% living in Asia. A large proportion of those living in developing countries face daily food shortages as a result of environmental impacts or political instability, while in the developed world there is surplus of food. For developing countries, the drive is to develop drought and pest resistant crops, which also maximize yield. The potential of nanotechnology to revolutionise the health care, textile, materials, information and communication technology, and energy sectors has been well publicized. The application of nanotechnology to agriculture and food industries is also getting attention nowadays. Investments in agriculture and food nanotechnologies carry increasing weight because their potential benefits range from improved food quality and safety to reduced agricultural inputs and improved processing and nutrition. While most investment is made primarily in developed countries, research advancements provide glimpses of potential applications in agricultural, food, and water safety that could have significant impacts on rural populations in developing countries. This review is concentrated on modern strategies used for the management of water, pesticides, limitations in the use of chemical pesticides and potential of nano-materials in sustainable agriculture management as modern approaches of nanotechnology. 
 
   
 
 Key words: Agriculture, nanotechnology, nanofertilizer, nanoencapsulation, nanoherbicides.

Nanotechnology in sustainable agriculture: Present concerns and future aspects

Arsenic behavior in soil-plant system and its detoxification mechanisms in plants: A review.

Green magnesium oxide nanoparticles-based modulation of cellular oxidative repair mechanisms to reduce arsenic uptake and translocation in rice (Oryza sativa L.) plants

Food safety has emerged as a high-urgency matter for sustainable agricultural production. Toxic metal contamination of soil and water significantly affects agricultural productivity, which is further aggravated by extreme anthropogenic activities and modern agricultural practices, leaving food safety and human health at risk. In addition to reducing crop production, increased metals/metalloids toxicity also disturbs plants’ demand and supply equilibrium. Counterbalancing toxic metals/metalloids toxicity demands a better understanding of the complex mechanisms at physiological, biochemical, molecular, cellular, and plant level that may result in increased crop productivity. Consequently, plants have established different internal defense mechanisms to cope with the adverse effects of toxic metals/metalloids. Nevertheless, these internal defense mechanisms are not adequate to overwhelm the metals/metalloids toxicity. Plants produce several secondary messengers to trigger cell signaling, activating the numerous transcriptional responses correlated with plant defense. Therefore, the recent advances in omics approaches such as genomics, transcriptomics, proteomics, metabolomics, ionomics, miRNAomics, and phenomics have enabled the characterization of molecular regulators associated with toxic metal tolerance, which can be deployed for developing toxic metal tolerant plants. This review highlights various response strategies adopted by plants to tolerate toxic metals/metalloids toxicity, including physiological, biochemical, and molecular responses. A seven-(omics)-based design is summarized with scientific clues to reveal the stress-responsive genes, proteins, metabolites, miRNAs, trace elements, stress-inducible phenotypes, and metabolic pathways that could potentially help plants to cope up with metals/metalloids toxicity in the face of fluctuating environmental conditions. Finally, some bottlenecks and future directions have also been highlighted, which could enable sustainable agricultural production.

/pdf/advances-in-omics-approaches-for-improving-toxic-metals-24ecsklx.pdf

Advances in “Omics” Approaches for Improving Toxic Metals/Metalloids Tolerance in Plants

With the improvement of people's living standards and rice trade worldwide, the demand for high-quality rice is increasing. Therefore, breeding high quality rice is critical to meet the market demand. However, progress in improving rice grain quality lags far behind that of rice yield. This might be because of the complexity of rice grain quality research, and the lack of consensus definition and evaluation standards for high quality rice. In general, the main components of rice grain quality are milling quality (MQ), appearance quality (AQ), eating and cooking quality (ECQ), and nutritional quality (NQ). Importantly, all these quality traits are determined directly or indirectly by the structure and composition of the rice seeds. Structurally, rice seeds mainly comprise the spikelet hull, seed coat, aleurone layer, embryo, and endosperm. Among them, the size of spikelet hull is the key determinant of rice grain size, which usually affects rice AQ, MQ, and ECQ. The endosperm, mainly composed of starch and protein, is the major edible part of the rice seed. Therefore, the content, constitution, and physicochemical properties of starch and protein are crucial for multiple rice grain quality traits. Moreover, the other substances, such as lipids, minerals, vitamins, and phytochemicals, included in different parts of the rice seed, also contribute significantly to rice grain quality, especially the NQ. Rice seed growth and development are precisely controlled by many genes; therefore, cloning and dissecting these quality-related genes will enhance our knowledge of rice grain quality and will assist with the breeding of high quality rice. This review focuses on summarizing the recent progress on cloning key genes and their functions in regulating rice seed structure and composition, and their corresponding contributions to rice grain quality. This information will facilitate and advance future high quality rice breeding programs. 

/pdf/genes-and-their-molecular-functions-determining-seed-23p13cf0.pdf

Genes and Their Molecular Functions Determining Seed Structure, Components, and Quality of Rice

Inorganic arsenic toxicity and alleviation strategies in rice

Aroma is a key grain quality trait that directly influences the market price of rice globally. Loss of function of betaine aldehyde dehydrogenase 2 (OsBADH2) affects the biosynthesis of 2-acetyl-1-pyrroline (2-AP), which is responsible for aroma in fragrant rice. The current study was aimed at creating new alleles of BADH2 using CRISPR/Cas9 gene editing technology under the genetic background of the japonica Ningjing 1 (NJ1) and indica Huang Huazhan (HHZ) varieties. Sensory evaluation and analysis using headspace solid-phase microextraction gas chromatography-mass spectrometry (HS-SPME-GC-MS) showed that the grains of the four homozygous T1 lines with new alleles of BADH2 (nj1-cr BADH2 -1, nj1-cr BADH2 -2, hhz-cr BADH2 -1 and hhz-cr BADH2 -2) produced moderate fragrance and had significantly increased 2-AP content compared with wild-types. Moreover, there were no significant differences in the amylose content and gelatinization temperature among the four lines with new alleles of BADH2 to the wild-types. Thereafter, we crossed the HHZ background new alleles of BADH2 with CMS line Taonong 1A (TN1A) to produce a three-line hybrid variety B-Tao-You-Xiangzhan (BTYXZ) with increased grain aroma. The 2-AP content in grains of the improved BTYXZ-1 and BTYXZ-2 reached at 26.16 and 18.74 μg/kg, and the gel consistency of BTYXZ-1 and BTYXZ-2 increased significantly by 9.1% and 6.5%, respectively, compared with the wild-type Tao-You-Xiangzhan (TYXZ). However, the γ-aminobutyric acid (GABA) content in the improved three-line hybrid rice BTYXZ-1 (5.6 mg/100 g) and BTYXZ-2 (10.7 mg/100 g) was significantly lower than that of the TYXZ. These results demonstrated that CRISPR/Cas9 gene editing technology could be successfully utilized in improving aroma in non-fragrant japonica and indica varieties. In addition, the newly developed BADH2 alleles provided important genetic resources for grain aroma improvement in three-line hybrid rice.

Production of aromatic three-line hybrid rice using novel alleles of BADH2.

Western Siberia is one of the major spring wheat regions of Russia, cultivating over 7 Mha. The objective of the study was to evaluate the variation of macro- and microelements, and of trace metals in four distinct groups of genetic resources: primary synthetics from CIMMYT (37 entries), primary synthetics from Japan (8), US hard red spring wheat cultivars (14), and material from the Kazakhstan–Siberian Network on Spring Wheat Improvement (KASIB) (74). The experiment was conducted at Omsk State Agrarian University, using a random complete block design with four replicates in 2017 and 2018. Concentrations of 15 elements were included in the analysis: macroelements, Ca, K, Mg, P, and S; microelements, Fe, Cu, Mn, and Zn; toxic trace elements, Cd, Co, Ni; and trace elements, Mo, Rb, and Sr. Protein content was found to be positively correlated with the concentrations of 11 of the elements in one or both years. Multiple regression was used to adjust the concentration of each element, based on significant correlations with agronomic traits and macroelements. All 15 elements were evaluated for their suitability for genetic enhancement, considering phenotypic variation, their share of the genetic component in this variation, as well as the dependence of the element concentration on other traits. Three trace elements (Sr, Mo, and Co) were identified as traits that were relatively easy to enhance through breeding. These were followed by Ca, Cd, Rb, and K. The important biofortification elements Mn and Zn were among the traits that were difficult to enhance genetically. The CIMMYT and Japanese synthetics had significantly higher concentrations of K and Sr, compared to the local check. The Japanese synthetics also had the highest concentrations of Ca, S, Cd, and Mo. The US cultivars had concentrations of Ca as high as the Japanese synthetics, and the highest concentrations of Mg and Fe. KASIB’s germplasm had near-average values for most elements. Superior germplasm, with high macro- and microelement concentrations and low trace-element concentrations, was found in all groups of material included.

/pdf/variation-of-macro-and-microelements-and-trace-metals-in-3hr20xdx.pdf

Variation of Macro- and Microelements, and Trace Metals in Spring Wheat Genetic Resources in Siberia

Dry mature pericarp of Citrus reticulata “Chachi” (PCR), Pericarpium Citri Reticulatae Chachiensis, is a traditional Chinese medicine that displays characteristics of different usage at different harvest times in clinical use. The corresponding changes in the bioactive components in PCR from different harvest times remain unclear. Therefore, in this study, broadly targeted metabolomics technology was used to compare the differences in bioactive components among pericarps of PCR, which are the raw material of PCR at different growth stages. In the results, 210 kinds of flavonoid metabolites were detected. The content of hesperidin in red PCR harvested in December was higher than that in Citri Reticulatae Pericarpium Viride (CRPV) and reddish PCR harvested from July to November. Furthermore, the content of nobiletin, tangeretin, and 3,3′,4′,5,6,7,8-heptamethoxyflavone in CRPV from July to September was higher than that in the PCR harvested at other times. In addition, the result of cluster analysis and PCA showed that CRPV harvested from July to September had an obvious grouping pattern with the reddish PCR and the red PCR harvested from October to December. Differential metabolites in six comparison groups (A1 vs. A6, A1 vs. A2, A2 vs. A3, A3 vs. A4, A4 vs. A5, A5 vs. A6) were 67, 48, 14, 51, 42, and 40, respectively. The common differential metabolite of four comparison groups was 3′,4′,7-trihydroxyflavone (A1 vs. A2, A2 vs. A3, A3 vs. A4, A4 vs. A5). All the flavonoid differential metabolites screened were enriched in 16 metabolic pathways. Moreover, the results of the evaluation of the total antioxidant capacity indicated that CRPV in August was a suitable raw material for the production of antioxidants. Through molecular docking, the content of potential anti-SARS-CoV-2 components in the PCR in October was higher than that in the PCR in other periods. These results further proved that PCR at different harvest times was endowed with different efficacy and usage due to the difference in the accumulation of bioactive components.

/pdf/study-on-flavonoids-and-bioactivity-features-of-pericarp-of-3h9nmyct.pdf

Jingxin Wang

Papers

Inorganic arsenic toxicity and alleviation strategies in rice

Production of aromatic three-line hybrid rice using novel alleles of BADH2.

Variation of Macro- and Microelements, and Trace Metals in Spring Wheat Genetic Resources in Siberia

Study on Flavonoids and Bioactivity Features of Pericarp of Citrus reticulata “Chachi” at Different Harvest Periods

Impact of iron/aluminum (hydr)oxide and clay minerals on heteroaggregation and transport of nanoplastics in aquatic environment.