Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

Fast parallel algorithms for short-range molecular dynamics

Cellulose constitutes the most abundant renewable polymer resource available today. As a chemical raw material, it is generally well-known that it has been used in the form of fibers or derivatives for nearly 150 years for a wide spectrum of products and materials in daily life. What has not been known until relatively recently is that when cellulose fibers are subjected to acid hydrolysis, the fibers yield defect-free, rod-like crystalline residues. Cellulose nanocrystals (CNs) have garnered in the materials community a tremendous level of attention that does not appear to be relenting. These biopolymeric assemblies warrant such attention not only because of their unsurpassed quintessential physical and chemical properties (as will become evident in the review) but also because of their inherent renewability and sustainability in addition to their abundance. They have been the subject of a wide array of research efforts as reinforcing agents in nanocomposites due to their low cost, availability, renewability, light weight, nanoscale dimension, and unique morphology. Indeed, CNs are the fundamental constitutive polymeric motifs of macroscopic cellulosic-based fibers whose sheer volume dwarfs any known natural or synthetic biomaterial. Biopolymers such as cellulose and lignin and † North Carolina State University. ‡ Helsinki University of Technology. Dr. Youssef Habibi is a research assistant professor at the Department of Forest Biomaterials at North Carolina State University. He received his Ph.D. in 2004 in organic chemistry from Joseph Fourier University (Grenoble, France) jointly with CERMAV (Centre de Recherche sur les Macromolecules Vegetales) and Cadi Ayyad University (Marrakesh, Morocco). During his Ph.D., he worked on the structural characterization of cell wall polysaccharides and also performed surface chemical modification, mainly TEMPO-mediated oxidation, of crystalline polysaccharides, as well as their nanocrystals. Prior to joining NCSU, he worked as assistant professor at the French Engineering School of Paper, Printing and Biomaterials (PAGORA, Grenoble Institute of Technology, France) on the development of biodegradable nanocomposites based on nanocrystalline polysaccharides. He also spent two years as postdoctoral fellow at the French Institute for Agricultural Research, INRA, where he developed new nanostructured thin films based on cellulose nanowiskers. Dr. Habibi’s research interests include the sustainable production of materials from biomass, development of high performance nanocomposites from lignocellulosic materials, biomass conversion technologies, and the application of novel analytical tools in biomass research. Chem. Rev. 2010, 110, 3479–3500 3479

Cellulose nanocrystals: chemistry, self-assembly, and applications.

There have been a number of review papers on layered silicate and carbon nanotube reinforced polymer nanocomposites, in which the fillers have high aspect ratios. Particulate–polymer nanocomposites containing fillers with small aspect ratios are also an important class of polymer composites. However, they have been apparently overlooked. Thus, in this paper, detailed discussions on the effects of particle size, particle/matrix interface adhesion and particle loading on the stiffness, strength and toughness of such particulate–polymer composites are reviewed. To develop high performance particulate composites, it is necessary to have some basic understanding of the stiffening, strengthening and toughening mechanisms of these composites. A critical evaluation of published experimental results in comparison with theoretical models is given.

/pdf/effects-of-particle-size-particle-matrix-interface-adhesion-yv055zq7xi.pdf

Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites

Poly(lactic acid) modifications

In pursuit of more sustainable and competitive biorefineries, the effective valorisation of lignin is key. An alluring opportunity is the exploitation of lignin as a resource for chemicals. Three technological biorefinery aspects will determine the realisation of a successful lignin-to-chemicals valorisation chain, namely (i) lignocellulose fractionation, (ii) lignin depolymerisation, and (iii) upgrading towards targeted chemicals. This review provides a summary and perspective of the extensive research that has been devoted to each of these three interconnected biorefinery aspects, ranging from industrially well-established techniques to the latest cutting edge innovations. To navigate the reader through the overwhelming collection of literature on each topic, distinct strategies/topics were delineated and summarised in comprehensive overview figures. Upon closer inspection, conceptual principles arise that rationalise the success of certain methodologies, and more importantly, can guide future research to further expand the portfolio of promising technologies. When targeting chemicals, a key objective during the fractionation and depolymerisation stage is to minimise lignin condensation (i.e. formation of resistive carbon–carbon linkages). During fractionation, this can be achieved by either (i) preserving the (native) lignin structure or (ii) by tolerating depolymerisation of the lignin polymer but preventing condensation through chemical quenching or physical removal of reactive intermediates. The latter strategy is also commonly applied in the lignin depolymerisation stage, while an alternative approach is to augment the relative rate of depolymerisation vs. condensation by enhancing the reactivity of the lignin structure towards depolymerisation. Finally, because depolymerised lignins often consist of a complex mixture of various compounds, upgrading of the raw product mixture through convergent transformations embodies a promising approach to decrease the complexity. This particular upgrading approach is termed funneling, and includes both chemocatalytic and biological strategies.

/pdf/chemicals-from-lignin-an-interplay-of-lignocellulose-1th1dk0l26.pdf

Chemicals from lignin: an interplay of lignocellulose fractionation, depolymerisation, and upgrading

Study of Biodegradable Polylactide/Poly(butylene adipate-co-terephthalate) Blends

Renewable poly(lactic acid) (PLA) exhibits high strength and stiffness PLA is fully biodegradable and has received great interest However, the inherent brittleness of PLA largely impedes its wide applications In this article, the recent progress in PLA toughening using various routes including plasticization, copolymerization, and melt blending with flexible polymers, was reviewed in detail PLA toughening, particularly modification of impact toughness through melt blending, was emphasized in this review Reactive blending was shown to be especially effective in achieving high impact strength The relationship between composition, morphology, and mechanical properties were summarized Toughening mechanisms were also discussed © 2011 Wiley Periodicals, Inc J Polym Sci Part B: Polym Phys, 2011

https://www.onlinelibrary.wiley.com/doi/pdf/10.1002/polb.22283

Research progress in toughening modification of poly(lactic acid)

Comparison of polylactide/nano-sized calcium carbonate and polylactide/montmorillonite composites: Reinforcing effects and toughening mechanisms

http://soiaefrutta.com/wp-content/uploads/2013/06/A.4.13-Mechanical-ant-thermal-properties.pdf

Mechanical and thermal properties of extruded soy protein sheets

Polyactide (PLA) was blended with an ethylene/n-butyl acrylate/glycidyl methacrylate (EBA-GMA) terpolymer and a zinc ionomer of ethylene/methacrylic acid (EMAA-Zn) copolymer. The phase morphology of the resulting ternary blends and its relationship with impact behaviors were studied systematically. Dynamic vulcanization of EBA-GMA in the presence of EMAA-Zn was investigated by torque rheology, and its cross-link level was evaluated by dynamic mechanical analysis. Reactive compatibilization between PLA and EBA-GMA was studied using Fourier transform infrared spectroscopy. The dispersed domains in the ternary blends displayed a “salami”-like phase structure, in which the EMAA-Zn phase evolved from occluded subinclusions into continuous phase with decrease in the EBA-GMA/EMAA-Zn ratio. An optimum range of particle sizes of the dispersed domains for high impact toughness was identified. Also, the micromechanical deformation process of these ternary blends was also investigated by observation of the impact-fra...

Jinwen Zhang

Papers

Study of Biodegradable Polylactide/Poly(butylene adipate-co-terephthalate) Blends

Research progress in toughening modification of poly(lactic acid)

Comparison of polylactide/nano-sized calcium carbonate and polylactide/montmorillonite composites: Reinforcing effects and toughening mechanisms

Mechanical and thermal properties of extruded soy protein sheets

Interaction of Microstructure and Interfacial Adhesion on Impact Performance of Polylactide (PLA) Ternary Blends