The boundary layer equations for plane, incompressible, and steady flow are 

$$\matrix{ {u{{\partial u} \over {\partial x}} + v{{\partial u} \over {\partial y}} = - {1 \over \varrho }{{\partial p} \over {\partial x}} + v{{{\partial ^2}u} \over {\partial {y^2}}},} \cr {0 = {{\partial p} \over {\partial y}},} \cr {{{\partial u} \over {\partial x}} + {{\partial v} \over {\partial y}} = 0.} \cr }$$

Boundary Layer Theory

A method is presented which enables the computation of the bed-load transport as the product of the saltation height, the particle velocity and the bed-load concentration. The equations of motions for a solitary particle are solved numerically to determine the saltation height and particle velocity. Experiments with gravel particles (transported as bed load) are selected to calibrate the mathematical model using the lift coefficient as a free parameter. The model is used to compute the saltation heights and lengths for a range of flow conditions. The computational results are used to determine simple relationships for the saltation characteristics. Measured transport rates of the bed load are used to compute the sediment concentration in the bed-load layer. A simple expression specifying the bed-load concentration as a function of the flow and sediment conditions is proposed. A verification analysis using about 600 (alternative) data shows that about 77% of the predicted bed-load-transport rates are within 0.5 and 2 times the observed values.

Sediment transport; Part I, Bed load transport

Development and validation of a three-dimensional morphological model

A method is presented which enables the computation of the suspended load as the depth-integration of the product of the local concentration and flow velocity. The method is based on the computation of the reference concentration from the bed-load transport. Measured concentration profiles have been used for calibration. New relationships are proposed to represent the size gradation of the bed material and the damping of the turbulence by the sediment particles. A verification analysis using about 800 data shows that about 76% of the predicted values are within 0.5 and 2 times the measured values.

Sediment Transport, Part II: Suspended Load Transport

A critical review of the intrinsic nature of vortex-induced vibrations

3-D numerical modelling of flow around a groin

Flow around a cylinder in steady current

During the last ten years Danish Hydraulic Institute (DHI) has together with the Institute of Hydrodynamics and Hydraulic Engineering (ISVA) of the Technical University of Denmark been working on the development of engineering models for sediment transport and morphology in the coastal zone. The models are centered around the model 'STP' which describes the transport of non-cohesive sediment under waves and current. The STP model is discussed, along with wave and current effects, and the longshore sediment transport model LITLONG.

Jørgen Fredsøe

Papers

3-D numerical modelling of flow around a groin

Flow around a cylinder in steady current

Engineering Models for Coastal Sediment Transport

Natural Backfilling Of Pipeline Trenches

Scour around breakwaters