Today's heterogeneous networks comprised of mostly macrocells and indoor small cells will not be able to meet the upcoming traffic demands. Indeed, it is forecasted that at least a $100\times$ network capacity increase will be required to meet the traffic demands in 2020. As a result, vendors and operators are now looking at using every tool at hand to improve network capacity. In this epic campaign, three paradigms are noteworthy, i.e., network densification, the use of higher frequency bands and spectral efficiency enhancement techniques. This paper aims at bringing further common understanding and analysing the potential gains and limitations of these three paradigms, together with the impact of idle mode capabilities at the small cells as well as the user equipment density and distribution in outdoor scenarios. Special attention is paid to network densification and its implications when transiting to ultra-dense small cell deployments. Simulation results show that comparing to the baseline case with an average inter site distance of 200 m and a 100 MHz bandwidth, network densification with an average inter site distance of 35 m can increase the average UE throughput by $7.56\times$ , while the use of the 10 GHz band with a 500 MHz bandwidth can further increase the network capacity up to $5\times$ , resulting in an average of 1.27 Gbps per UE. The use of beamforming with up to 4 antennas per small cell BS lacks behind with average throughput gains around 30% and cell-edge throughput gains of up to $2\times$ . Considering an extreme densification, an average inter site distance of 5 m can increase the average and cell-edge UE throughput by $18\times$ and $48\times$ , respectively. Our study also shows how network densification reduces multi-user diversity, and thus proportional fair alike schedulers start losing their advantages with respect to round robin ones. The energy efficiency of these ultra-dense small cell deployments is also analysed, indicating the benefits of energy harvesting approaches to make these deployments more energy-efficient. Finally, the top ten challenges to be addressed to bring ultra-dense small cell deployments to reality are also discussed.

Towards 1 Gbps/UE in Cellular Systems: Understanding Ultra-Dense Small Cell Deployments

Disclosed herein are methods, systems, and apparatuses to enable subscribers of mobile wireless communication devices to view, research, select and customize service plans; to create and manage device groups, share and set permission controls for service plans among devices in device groups; to manage communication services through graphical user interfaces; to sponsor and promote service plans; and to design, manage, and control communication services through application programming interfaces.

Service Plan Design, User Interfaces, Application Programming Interfaces, and Device Management

Device Assisted Services (DAS) for protecting network capacity is provided. In some embodiments, DAS for protecting network capacity includes monitoring a network service usage activity of the communications device in network communication; classifying the network service usage activity for differential network access control for protecting network capacity; and associating the network service usage activity with a network service usage control policy based on a classification of the network service usage activity to facilitate differential network access control for protecting network capacity.

Device-Assisted Services for Protecting Network Capacity

A method performed by an end user device associated with a service plan having a limit on usage of a network service, the method comprising storing one or more notification actions corresponding to one or more notification requests; performing a device action that reflects a past or intended use of the network service; receiving one of the one or more notification requests from a network element in response to the device action; performing one of the one or more notification actions in response to the notification request, the notification action causing the end user device to retrieve at least a portion of a notification message associated with a status of the use, the at least a portion of the notification message being separate from the one of the one or more notification requests; and presenting the notification message on a user interface of the end user device.

System and Method for Providing User Notifications

According to the present invention, there are provided a base station device, a terminal device, a communication method, and an integrated circuit capable of performing communication more efficiently when the terminal device transmits an uplink signal based on scheduling by the base station device. The terminal device includes a setting unit that sets a first uplink-downlink configuration, a second uplink-downlink configuration, and a third uplink-downlink configuration, a reception unit that monitors a physical downlink control channel accompanied with a downlink control information format which is used to schedule a physical downlink shared channel in a downlink subframe based on the third uplink-downlink configuration and includes information making a request for transmitting a sounding reference signal, and a transmission unit that transmits or drops the sounding reference signal and transmit an HARQ-ACK for transmission with the physical downlink shared channel.

Terminal device, base station device, communication method, and integrated circuit

A method and corresponding equipment by which a wireless terminal communicatively coupled to a radio access network adapts to gating in respect to a downlink signal from a radio access network carrying power control commands (e.g. the F-DPCH of UTRAN with WCDMA), including gating by the radio access network of either just the power control commands or the channel itself, or gating of reception of the power control commands by the user equipment. The adaptation can include changing values of parameters used in determining when the wireless terminal declares a radio link failure, or instead only changing the procedures used to determine whether a parameter value has been achieved and thus only effectively changing the parameter values (or one or more of the parameters can be actually and effectively changed).

Enhanced ue out-of-sync behavior with gated uplink dpcch or gated downlink f-dpch or dpcch transmission

This invention describes a method for a new methodology for improving a high speed downlink shared channel (HS-DSCH) transport format allocation in communication systems (e.g., mobile phone networks) using, e.g., a network element such as a node B. As CQI (channel quality indicator) reports made by a user terminal are time stamped in a sense that they correspond to a given reference period, the Node B is able to determine what time instant in the past the given CQI report corresponds to. As the Node B scheduler knows a history of HS-DSCH transmission, it is able to determine how much HS-DSCH power was transmitted during the time corresponding to the received CQI report. Based on this information, it determines the bias required to the CQI reports received at different times to improve an accuracy of the allocated HS-DSCH transport format.

A method for improving an hs-dsch transport format allocation

A method includes generating automatic repeat request feedback information at a first device in response to a downlink transmission from a second device; encoding the feedback information to comprise an indication of a number of streams received in the downlink transmission and transmitting encoded feedback information to the second device. Another method includes transmitting a multi-stream downlink transmission from a first device to a second device; receiving encoded hybrid automatic repeat request feedback information from the second device; decoding the received hybrid automatic repeat request feedback information at the first device; and determining from the encoding of the hybrid automatic repeat request feedback information at least a number of streams that were actually received by the device from the downlink transmission. A wireless link between the devices can be a 2×2 MIMO link. Also disclosed are memory mediums for storing program instructions to implement the methods, and apparatus including user equipment and base stations constructed to carry out the methods.

Apparatus, method and computer program product providing hybrid arq feedback for hsdpa mimo

A wireless communication terminal (10) having a plurality of radio receiver branches (11a-c) all ordinarily for use in receiving a downlink frequency from a radio access network (15), but configured to intermittently tune one or another of the branches (11a-c) to a non-downlink frequency (causing reduced receiver performance in receiving the downlink frequency), but doing so only when expected by the radio access network (15) (or other entity of a wireless communication network with which the wireless communication terminal is in wireless communication).

Reduced performance mode of operation for use as needed by a wireless communication terminal

A method includes establishing a first radio link with a serving network entity and a second radio link with a target network entity, commencing a soft handover from the serving network entity to the target network entity, receiving a quality target from a network comprising the serving and target network entities, and applying the quality target only to the first radio link to generate a power control command.

Jorma Kaikkonen

Papers

Enhanced ue out-of-sync behavior with gated uplink dpcch or gated downlink f-dpch or dpcch transmission

A method for improving an hs-dsch transport format allocation

Apparatus, method and computer program product providing hybrid arq feedback for hsdpa mimo

Reduced performance mode of operation for use as needed by a wireless communication terminal

Apparatus, method and computer program providing enhanced fractional dedicated physical channel downlink power control during soft handover