Tremendous efforts are being made to develop electrode materials, electrolytes, and separators for energy storage devices to meet the needs of emerging technologies such as electric vehicles, decarbonized electricity, and electrochemical energy storage. However, the sustainability concerns of lithium-ion batteries (LIBs) and next-generation rechargeable batteries have received little attention. Recycling plays an important role in the overall sustainability of future batteries and is affected by battery attributes including environmental hazards and the value of their constituent resources. Therefore, recycling should be considered when developing battery systems. Herein, we provide a systematic overview of rechargeable battery sustainability. With a particular focus on electric vehicles, we analyze the market competitiveness of batteries in terms of economy, environment, and policy. Considering the large volumes of batteries soon to be retired, we comprehensively evaluate battery utilization and recycling from the perspectives of economic feasibility, environmental impact, technology, and safety. Battery sustainability is discussed with respect to life-cycle assessment and analyzed from the perspectives of strategic resources and economic demand. Finally, we propose a 4H strategy for battery recycling with the aims of high efficiency, high economic return, high environmental benefit, and high safety. New challenges and future prospects for battery sustainability are also highlighted.

Sustainable Recycling Technology for Li-Ion Batteries and Beyond: Challenges and Future Prospects.

Recycling of spent lithium-ion batteries (LIBs) has attracted significant attention in recent years due to the increasing demand for corresponding critical metals/materials and growing pressure on the environmental impact of solid waste disposal. A range of investigations have been carried out for recycling spent LIBs to obtain either battery materials or individual compounds. For the effective recovery of materials to be enhanced, physical pretreatment is usually applied to obtain different streams of waste materials ensuring efficient separation for further processing. Subsequently, a metallurgical process is used to extract metals or separate impurities from a specific waste stream so that the recycled materials or compounds can be further prepared by incorporating principles of materials engineering. In this review, the current status of spent LIB recycling is summarized in light of the whole recycling process, especially focusing on the hydrometallurgy. In addition to understanding different hydromet...

A Critical Review and Analysis on the Recycling of Spent Lithium-Ion Batteries

Zinc oxide particles: Synthesis, properties and applications

Ever-growing global energy needs and environmental damage have motivated the pursuit of sustainable energy sources and storage technologies. As attractive energy storage technologies to integrate renewable resources and electric transportation, rechargeable batteries, including lead–acid, nickel–metal hydride, nickel–cadmium, and lithium-ion batteries, are undergoing unprecedented rapid development. However, the intrinsic toxicity of rechargeable batteries arising from their use of toxic materials is potentially environmentally hazardous. Additionally, the massive production of batteries consumes numerous resources, some of which are scarce. It is therefore essential to consider battery recycling when developing battery systems. Here, we provide a systematic overview of rechargeable battery recycling from a sustainable perspective. We present state-of-the-art fundamental research and industrial technologies related to battery recycling, with a special focus on lithium-ion battery recycling. We introduce the concept of sustainability through a discussion of the life-cycle assessment of battery recycling. Considering the forecasted trend of a massive number of retired power batteries from the forecasted surge in electric vehicles, their repurposing and reuse are considered from economic, technical, environmental, and market perspectives. New opportunities, challenges, and future prospects for battery recycling are then summarized. A reinterpreted 3R strategy entailing redesign, reuse, and recycling is recommended for the future development of battery recycling.

Toward sustainable and systematic recycling of spent rechargeable batteries

Recycling of spent lithium-ion batteries in view of lithium recovery: A critical review

Recycling of spent lithium-ion battery cathode materials by ammoniacal leaching

The treatment of spent zinc-carbon batteries for the recovery of valuable metals followed by conversion to Mn−Zn ferrite has been conducted employing two-stage alkali and acid leaching and co-precipitation method. In the first stage, leaching process was carried out with 4 M NaOH, which resulted in a recovery of 63.4 %Zn and 0.1% Mn. Electrowinning of alkali leaching solution containing 12.75 g/L Zn at a current density of 0.2 A/cm2 produced Zn metal of 15 nm to 30 nm size and 99.9% purity. The second stage leaching of residue with 3 M H2SO4 and 6 vol.% H2O2 at a solid/liquid ratio of 1∶10 indicated the leaching efficiency of 98.0% Zn, 97.9% Mn and 55.2% Fe. The obtained leaching solution was finally adjusted to suitable mole ratios of Mn∶Zn∶Fe (1∶1∶4) by the addition of Zn and Fe sulfate salts followed by pH control to produce Mn−Zn ferrite powder. The characterization of the ferrite powder showed uniform nano-crystalline particles of about 20 nm size with spinel structure.

Preparation of Mn−Zn ferrite from spent zinc-carbon batteries by alkali leaching, acid leaching and Co-precipitation

A cylindrical Mo ingot with ultra-high purity was obtained by electron beam (EB) drip melting process using a Mo rod. The Mo rod as a bar feeder was prepared from Mo powder by vacuum sintering and swaging processing. Most of impurities excluding W in the Mo ingot were removed down to below ppm level by three-times EB drip melting, where the purity of the Mo ingot except W was improved from the initial Mo powder purity of 3N (99.95%) to 5Nup (99.9998%). Furthermore, the gaseous impurities C, N and O in the Mo ingot were removed to a level below 5 ppm from the initial level of around 460 ppm by repetitive EB drip melting.

Preparation of Ultra-High Purity Cylindrical Mo Ingot by Electron Beam Drip Melting

Recycling technologies would be required in consideration of increasing demand in lithium ion batteries (LIBs). In this study, the leaching behavior of Ni, Co and Mn is investigated with ammoniacal medium for spent cathode active materials, which are separated from a commercial LIB pack in hybrid electric vehicles. The leaching behavior of each metal is analyzed in the presence of reducing agent and pH buffering agent. The existence of reducing agent is necessary to increase the leaching efficiency of Ni and Co. The leaching of Mn is insignificant even with the existence of reducing agent in contrast to Ni and Co. The most conspicuous difference between acid and ammoniacal leaching would be the selective leaching behavior between Ni/Co and Mn. The ammoniacal leaching can reduce the cost of basic reagent that makes the pH of leachate higher for the precipitation of leached metals in the acid leaching.

http://www.koreascience.or.kr:80/article/JAKO201521839155953.pdf

Kang-In Rhee

Papers

Recycling of spent lithium-ion battery cathode materials by ammoniacal leaching

Preparation of Mn−Zn ferrite from spent zinc-carbon batteries by alkali leaching, acid leaching and Co-precipitation

Preparation of Ultra-High Purity Cylindrical Mo Ingot by Electron Beam Drip Melting

Ammoniacal Leaching for Recovery of Valuable Metals from Spent Lithium-ion Battery Materials