Fundamentals of Plasmonics.- Electromagnetics of Metals.- Surface Plasmon Polaritons at Metal / Insulator Interfaces.- Excitation of Surface Plasmon Polaritons at Planar Interfaces.- Imaging Surface Plasmon Polariton Propagation.- Localized Surface Plasmons.- Electromagnetic Surface Modes at Low Frequencies.- Applications.- Plasmon Waveguides.- Transmission of Radiation Through Apertures and Films.- Enhancement of Emissive Processes and Nonlinearities.- Spectroscopy and Sensing.- Metamaterials and Imaging with Surface Plasmon Polaritons.- Concluding Remarks.

/pdf/plasmonics-fundamentals-and-applications-4syb9877sr.pdf

Plasmonics: Fundamentals and Applications

Research into terahertz technology is now receiving increasing attention around the world, and devices exploiting this waveband are set to become increasingly important in a very diverse range of applications. Here, an overview of the status of the technology, its uses and its future prospects are presented.

Cutting-edge terahertz technology

Recent years have seen a rapid expansion of research into nanophotonics based on surface plasmon–polaritons. These electromagnetic waves propagate along metal–dielectric interfaces and can be guided by metallic nanostructures beyond the diffraction limit. This remarkable capability has unique prospects for the design of highly integrated photonic signal-processing systems, nanoresolution optical imaging techniques and sensors. This Review summarizes the basic principles and major achievements of plasmon guiding, and details the current state-of-the-art in subwavelength plasmonic waveguides, passive and active nanoplasmonic components for the generation, manipulation and detection of radiation, and configurations for the nanofocusing of light. Potential future developments and applications of nanophotonic devices and circuits are also discussed, such as in optical signals processing, nanoscale optical devices and near-field microscopy with nanoscale resolution.

Plasmonics beyond the diffraction limit

Metamaterial structures are taught which provide for the modulation of terahertz frequency signals. Each element within an array of metamaterial (MM) elements comprises multiple loops and at least one gap. The MM elements may comprise resonators with conductive loops and insulated gaps, or the inverse in which insulated loops are present with conductive gaps; each providing useful transmissive control properties. The metamaterial elements are fabricated on a semiconducting substrate configured with a means of enhancing or depleting electrons from near the gaps of the MM elements. An on to off transmissivity ratio of about 0.5 is achieved with this approach. Embodiments are described in which the MM elements incorporated within a Quantum Cascade Laser (QCL) to provide surface emitting (SE) properties.

Active terahertz metamaterial devices

Sources and systems for far-infrared or terahertz (1 THz = 10(12) Hz) radiation have received extensive attention in recent years, with applications in sensing, imaging and spectroscopy. Terahertz radiation bridges the gap between the microwave and optical regimes, and offers significant scientific and technological potential in many fields. However, waveguiding in this intermediate spectral region still remains a challenge. Neither conventional metal waveguides for microwave radiation, nor dielectric fibres for visible and near-infrared radiation can be used to guide terahertz waves over a long distance, owing to the high loss from the finite conductivity of metals or the high absorption coefficient of dielectric materials in this spectral range. Furthermore, the extensive use of broadband pulses in the terahertz regime imposes an additional constraint of low dispersion, which is necessary for compatibility with spectroscopic applications. Here we show how a simple waveguide, namely a bare metal wire, can be used to transport terahertz pulses with virtually no dispersion, low attenuation, and with remarkable structural simplicity. As an example of this new waveguiding structure, we demonstrate an endoscope for terahertz pulses.

Metal wires for terahertz wave guiding

We report the experimental and theoretical study of the dispersive behavior of surface plasmon polaritons (SPPs) on cylindrical metal surfaces in the terahertz frequency range. Time-domain measurements of terahertz SPPs propagating on metal wires reveal a unique structure that is inconsistent with a simple extrapolation of the high frequency portion of the dispersion diagram for SPPs on a planar metal surface, and also distinct from that of SPPs on metal nanowires observed at visible and near-infrared frequencies. The results are consistent with a numerical solution of Maxwell's equations, showing that the dispersive behavior of SPPs on a cylindrical metal surface at terahertz frequencies is quite different from that of SPPs on a flat surface. These findings indicate the increasing importance of skin effects for SPPs in the terahertz range, as well as the enhancement of such effects on curved surfaces.

Dispersion of surface plasmon polaritons on metal wires in the terahertz frequency range.

Wire waveguides have recently been shown to be valuable for transporting pulsed terahertz radiation. This technique relies on the use of a scattering mechanism for input coupling. A radially polarized surface wave is excited when a linearly polarized terahertz pulse is focused on the gap between the wire waveguide and another metal structure. We calculate the input coupling efficiency using a simulation based on the Finite Element Method (FEM). Additional FEM results indicate that enhanced coupling efficiency can be achieved through the use of a radially symmetric photoconductive antenna. Experimental results confirm that such an antenna can generate terahertz radiation which couples to the radial waveguide mode with greatly improved efficiency.

Enhanced coupling of terahertz radiation to cylindrical wire waveguides

A system for coupling teraherz (THz) radiation to a coaxial waveguide comprises an antenna that generates THz radiation having a mode that matches the mode of the waveguide. The antenna may comprise a pair of concentric electrodes, at least one of which may be affixed to or formed by one end of the waveguide. The radiation may have wavelengths between approximately 30 μm and 3 mm. The waveguide may comprise an inner core and an outer wall defining an annular region. A terahertz sensor system may comprise a terahertz antenna comprising first and second concentric electrodes, means for generating a field across the trodes and means for triggering the emission of terahertz radiation, a first waveguide having first and second ends, said first end being coupled to said antenna so as to receive at least a portion of said terahertz radiation, and a sensor for detecting said terahertz radiation.

A method for coupling terahertz pulses into a coaxial waveguide

We have performed measurements on terahertz (THz) apertureless near-field microscopy that show that the temporal shape of the observed near-field signals is approximately proportional to the time-integral of the incident field. Associated with this signal change is a bandwidth reduction by approximately a factor of 3 which is observed using both a near-field detection technique and a far-field detection technique. Using a dipole antenna model, it is shown how the observed effects can be explained by the signal filtering properties of the metal tips used in the experiments.

/pdf/antenna-effects-in-terahertz-apertureless-near-field-optical-49enzgz8rl.pdf

Kanglin Wang

Papers

Metal wires for terahertz wave guiding

Dispersion of surface plasmon polaritons on metal wires in the terahertz frequency range.

Enhanced coupling of terahertz radiation to cylindrical wire waveguides

A method for coupling terahertz pulses into a coaxial waveguide

Antenna effects in terahertz apertureless near-field optical microscopy