Renewable Resources Robert-Jan van Putten,†,‡ Jan C. van der Waal,† Ed de Jong,*,† Carolus B. Rasrendra,‡,⊥ Hero J. Heeres,*,‡ and Johannes G. de Vries* †Avantium Chemicals, Zekeringstraat 29, 1014 BV Amsterdam, the Netherlands ‡Department of Chemical Engineering, University of Groningen, Nijenborgh 4, 9747 AG Groningen, the Netherlands Stratingh Institute for Chemistry, University of Groningen, Nijenborgh 4, 9747 AG Groningen, the Netherlands DSM Innovative Synthesis BV, P.O. Box 18, 6160 MD Geleen, the Netherlands Department of Chemical Engineering, Institut Teknologi Bandung, Ganesha 10, Bandung 40132, Indonesia

Hydroxymethylfurfural, A Versatile Platform Chemical Made from Renewable Resources

Protic Ionic Liquids: Properties and Applications

2.5. Stabilization of IL Emulsions by Nanoparticles 2623 3. Hydrogenations in ILs 2623 3.1. Hydrogenation on IL-Stabilized Nanoparticles 2623 3.1.1. Hydrogenation of 1,3-Butadiene 2623 3.1.2. Hydrogenation of Alkenes and Arenes 2624 3.1.3. Hydrogenation of Ketones 2624 3.2. Homogeneous Catalytic Hydrogenation in ILs 2624 3.3. Hydrogenation of Functionalized ILs 2625 3.3.1. Selective Hydrogenation of Polymers 2625 3.4. Asymmetric Hydrogenations 2626 3.4.1. Enantioselective Hydrogenation 2626 3.5. Role of the ILs Purity in Hydrogenation Reactions 2628

Catalysis in ionic liquids

Structure and nanostructure in ionic liquids.

Ionic liquids offer a unique suite of properties that make them important candidates for a number of energy related applications. Cation–anion combinations that exhibit low volatility coupled with high electrochemical and thermal stability, as well as ionic conductivity, create the possibility of designing ideal electrolytes for batteries, super-capacitors, actuators, dye sensitised solar cells and thermo-electrochemical cells. In the field of water splitting to produce hydrogen they have been used to synthesize some of the best performing water oxidation catalysts and some members of the protic ionic liquid family co-catalyse an unusual, very high energy efficiency water oxidation process. As fuel cell electrolytes, the high proton conductivity of some of the protic ionic liquid family offers the potential of fuel cells operating in the optimum temperature region above 100 °C. Beyond electrochemical applications, the low vapour pressure of these liquids, along with their ability to offer tuneable functionality, also makes them ideal as CO2 absorbents for post-combustion CO2 capture. Similarly, the tuneable phase properties of the many members of this large family of salts are also allowing the creation of phase-change thermal energy storage materials having melting points tuned to the application. This perspective article provides an overview of these developing energy related applications of ionic liquids and offers some thoughts on the emerging challenges and opportunities.

/pdf/energy-applications-of-ionic-liquids-4xj70drpc5.pdf

Energy applications of ionic liquids

Preparation of 5-hydroymethylfurfural by dehydration of fructose in the presence of acidic ionic liquid

Covalent bond immobilized ionic liquids are prepared via radical chain transfer reaction of 1-allylimidazolium based ionic liquids on modified silica gel and proved to be recyclable heterogeneous acidic catalysts for esterification and nitration reactions.

Acidic ionic liquid modified silica gel as novel solid catalysts for esterification and nitration reactions

The viscosities of 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim] [PF6]) and 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) were measured by using a rolling-ball viscometer. The experimental temperatures were from 293.15 to 353.15 K, and the pressures were from 0.1 to 20.0 MPa.

Viscosity of [bmim][PF6] and [bmim][BF4] at high pressure

Thermal conductivities are reported for a series of 1-alkyl-3-methylimidazolium hexafluorophosphates having butyl, hexyl, and octyl groups, which are expressed by [bmim][PF6], [hmim][PF6], and [omim][PF6], respectively. The experimental method used was a transient short-hot-wire method. Since only a small amount of sample liquid is required, this method was found to be effective for the thermal-conductivity measurements of ionic liquids (ILs). The experimental temperatures ranged from 294 to 335 K at pressures up to 20 MPa. The values of the thermal conductivities of ILs at normal pressure are similar to those of benzene. It was found that an effect of the length of the alkyl chain on the thermal conductivities in ILs is negligible. From the data for the thermal conductivity and viscosity at 293.15 K and 0.1 MPa of ILs and normal alkanes, a simple correlation was developed based on the Mohanty theory. From comparisons between the thermal conductivities of ILs and those of organic liquids (n-hexane, benzene, and methanol), the temperature and pressure dependences of the thermal conductivity of ILs are relatively weak.

Thermal Conductivities of [bmim][PF 6 ], [hmim][PF 6 ], and [omim][PF 6 ] from 294 to 335 K at Pressures up to 20 MPa

Novel acidic ionic liquids catalytic systems are developed for the Friedel–Crafts alkylation of aromatic compounds with alkenes

Kun Qiao

Papers

Preparation of 5-hydroymethylfurfural by dehydration of fructose in the presence of acidic ionic liquid

Acidic ionic liquid modified silica gel as novel solid catalysts for esterification and nitration reactions

Viscosity of [bmim][PF6] and [bmim][BF4] at high pressure

Thermal Conductivities of [bmim][PF 6 ], [hmim][PF 6 ], and [omim][PF 6 ] from 294 to 335 K at Pressures up to 20 MPa

Novel acidic ionic liquids catalytic systems for Friedel-Crafts alkylation of aromatic compounds with alkenes