Solution combustion is an exciting phenomenon, which involves propagation of self-sustained exothermic reactions along an aqueous or sol–gel media. This process allows for the synthesis of a variety of nanoscale materials, including oxides, metals, alloys, and sulfides. This Review focuses on the analysis of new approaches and results in the field of solution combustion synthesis (SCS) obtained during recent years. Thermodynamics and kinetics of reactive solutions used in different chemical routes are considered, and the role of process parameters is discussed, emphasizing the chemical mechanisms that are responsible for rapid self-sustained combustion reactions. The basic principles for controlling the composition, structure, and nanostructure of SCS products, and routes to regulate the size and morphology of the nanoscale materials are also reviewed. Recently developed systems that lead to the formation of novel materials and unique structures (e.g., thin films and two-dimensional crystals) with unusual...

Solution Combustion Synthesis of Nanoscale Materials

This review article focuses on the sol-gel preparation of high temperature superconducting oxides wherein different classes of gel technologies were utilized. These involve: 1) the sol-gel route based upon hydrolysis-condensation of metal-alkoxides, 2) the gelation route based upon concentration of aqueous solutions involving metal-chelates, often called as “chelate gel” or “amorphous chelate” route, and 3) the organic polymeric gel route. This paper reviews the current status of these sol-gel processes, and illustrates the underlying chemistry involved in each sol-gel technology. It is demonstrated that the chemical homogeneity of the gel is often disturbed by the differences in the chemistries of the cations. Prior to gelation the starting precursor solution containing various forms of metal-complexes must be chemically modified to overcome this problem. Illustration of a variety of strategies for success in obtaining a homogeneous multicomponent gel with no precipitation is focal point of this review article.

Invited review “sol-gel” preparation of high temperature superconducting oxides

A review of recent progress in coatings, surface modifications and alloy developments for solid oxide fuel cell ferritic stainless steel interconnects

The influence of transition metal oxides additives, especially zinc oxide, on the densification and electrical properties of doped barium zirconate have been examined. With the use of zinc oxide as a sintering aid, BaZr_(0.85)V_(0.15)O_(3-δ) was readily sintered to above 93% of theoretical density at 1300 degrees C. Scanning electron microscopic investigations showed Zn accumulation in the intergranular regions. Thermogravimetric analysis of the material under flowing CO_2 showed ZnO-modified barium zirconate to exhibit excellent chemical stability. The conductivity, as measured by A.C. impedance spectroscopy under H_2O saturated nitrogen, was slightly lower than that of unmodified barium zirconate. Electromotive force measurements under fuel cell conditions revealed the total ionic transport number to be ~0.9 at 600 degrees C. The combination of electrical and chemical properties and good sinterabifity render ZnO-modified barium zirconate an excellent candidate for reduced temperature solid oxide fuel cell applications.

L.E. Thomas

Papers

Glycine-nitrate combustion synthesis of oxide ceramic powders