Evolution, challenges and path forward for low temperature combustion engines

Diesel engines are the main source of rapidly-growing energy consumption worldwide. Diesel consumption is responsible for serious air pollution, which includes nitrogen oxides (NOx), hydrocarbon (HC), carbon monoxide (CO) emissions and some particulate matter (PM) discharged from the combustion chamber. In the past few decades, alternative fuels, such as alcohol, biodiesel, natural gas, and Di Methyl Ether (DME), have been used in diesel engines to reduce energy costs and environmental pollution. As a result of alternative fuels directives, an increasing number of diesel engines have adapted dual fuel blends, and an enormous amount of research is focused on new and inadequately studied combustion and emission profiles. Compared to conventional diesel fuel, the application of dual fuels would add new parameters to combustion and emission profiles for diesel vehicles worldwide. This review aims to reveal (1) Known and anticipated combustion characteristics and emissions products from dual fuels. (2) Toxic properties and the expected influence on engine performance. (3) Identifying promising alternative fuels for emissions control in compression combustion engines. The results presented herein will show a significant reduction of regular gas and PM emissions by the use of alcohol/diesel dual fuel, while unregulated emissions such as methanol, ethanol, acetaldehyde, formaldehyde, ketone, have increased compared to those from diesel fuel. PM emissions decreased significantly with the increase of alternative fuels, such as alcohols, natural gas, biodiesel and DME, while regular gaseous emissions varied depending on the type alternative fuel and the engine conditions. As one new and cleaner substitute for diesel engines, DME operation has a longer injection delay, lower maximum cylinder pressure, a lower ratio of pressure rise, and shorter ignition delay in comparison with diesel operation--the opposite of alcohol/diesel and dual fuels. This review evaluates the effects of some alternative fuels (alcohol, biodiesel, natural gas and Di Methyl Ether (DME)) on combustion characteristics and emission products from diesel engines to meet future emission regulations using alternative fuel.

Effects of alternative fuels on the combustion characteristics and emission products from diesel engines: A review

Low temperature combustion (LTC) is a recent engine technology that can reduce the oxides of nitrogen (NOx) and soot emissions simultaneously while maintaining higher thermal efficiency. The present review work investigates the performance, emission and combustion characteristics of LTC mode engines. Partially premixed LTC (PPLTC), homogeneous charge compression ignition (HCCI), premixed charge compression ignition (PCCI) and reactivity controlled compression ignition (RCCI) modes are researched under LTC mode. In recent decades, different engine strategies have been employed to reduce exhaust emissions and to enhance thermal efficiency. Exhaust gas recirculation, variable valve timing (VVT), advanced fuel injection technologies are adapted to achieve LTC mode in internal combustion (IC) engines to get improved outcomes. This review highlights the properties of fuels, fuel supply systems, valve actuation mechanisms, engine operating conditions and its effects on the engine characteristics. This review provides a perspective plan to the researchers for enhancing the performance, emission and combustion behavior of an engine by using LTC mode with lower NOx and soot emissions. Among LTC mode engines, RCCI mode engine operates well in 60% load, 60% premixed ratio, 35:1 air-fuel ratio and 56% brake thermal efficiency within the combustion phasing control.

A review on low temperature combustion engines: Performance, combustion and emission characteristics

A literature review of fuel effects on performance and emission characteristics of low-temperature combustion strategies

Effects of port fuel injection (PFI) of n-butanol and EGR on combustion and emissions of a direct injection diesel engine

Effects of DME pilot quantity on the performance of a DME PCCI-DI engine

Study on improvement of fuel economy and reduction in emissions for stoichiometric gasoline engines

The effects of homogeneous charge compression ignition (HCCI) engine compression ratio on its combustion characteristics were studied experimentally on a modified TY1100 single cylinder engine fueled with dimethyl ether. The results show that dimethyl ether (DME) HCCI engine can work stably and can realize zero nitrogen oxides (NOx) emission and smokeless combustion under the compression ratio of both 10.7 and 14. The combustion process has obvious two stage combustion characteristics at ɛ = 10.7 (ɛ refers to compression ratio), and the combustion beginning point is decided by the compression temperature, which varies very little with the engine load; the combustion beginning point is closely related to the engine load (concentration of mixture) with the increase in the compression temperature, and it moves forward versus crank angle with the increase in the engine load at ɛ = 14; the combustion durations are shortened with the increase in the engine load under both compression ratios.

Li Wei

Papers

Effects of DME pilot quantity on the performance of a DME PCCI-DI engine

Study on improvement of fuel economy and reduction in emissions for stoichiometric gasoline engines

Effects of compression ratio on the combustion characteristics of a homogeneous charge compression ignition engine

Advanced combustion operation in a single-cylinder engine