A new polymer donor (PBDB-T-SF) and a new small molecule acceptor (IT-4F) for fullerene-free organic solar cells (OSCs) were designed and synthesized The influences of fluorination on the absorption spectra, molecular energy levels, and charge mobilities of the donor and acceptor were systematically studied The PBDB-T-SF:IT-4F-based OSC device showed a record high efficiency of 131%, and an efficiency of over 12% can be obtained with a thickness of 100–200 nm, suggesting the promise of fullerene-free OSCs in practical applications

Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells

Recent Advances in Bulk Heterojunction Polymer Solar Cells

18% Efficiency organic solar cells

Organic solar cells (OSCs) have been dominated by donor:acceptor blends based on fullerene acceptors for over two decades. This situation has changed recently, with non-fullerene (NF) OSCs developing very quickly. The power conversion efficiencies of NF OSCs have now reached a value of over 13%, which is higher than the best fullerene-based OSCs. NF acceptors show great tunability in absorption spectra and electron energy levels, providing a wide range of new opportunities. The coexistence of low voltage losses and high current generation indicates that new regimes of device physics and photophysics are reached in these systems. This Review highlights these opportunities made possible by NF acceptors, and also discuss the challenges facing the development of NF OSCs for practical applications.

/pdf/organic-solar-cells-based-on-non-fullerene-acceptors-2xrgk24kh9.pdf

Organic solar cells based on non-fullerene acceptors.

Organic solar cells have desirable properties, including low cost of materials, high-throughput roll-to-roll production, mechanical flexibility and light weight. However, all top-performance devices are at present processed using halogenated solvents, which are environmentally hazardous and would thus require expensive mitigation to contain the hazards. Attempts to process organic solar cells from non-halogenated solvents lead to inferior performance. Overcoming this hurdle, here we present a hydrocarbon-based processing system that is not only more environmentally friendly but also yields cells with power conversion efficiencies of up to 11.7%. Our processing system incorporates the synergistic effects of a hydrocarbon solvent, a novel additive, a suitable choice of polymer side chain, and strong temperature-dependent aggregation of the donor polymer. Our results not only demonstrate a method of producing active layers of organic solar cells in an environmentally friendly way, but also provide important scientific insights that will facilitate further improvement of the morphology and performance of organic solar cells. The processing of high-performance organic solar cells usually requires environmentally hazardous solvents. Now, hydrocarbon-based processing is shown to achieve relatively high performance in a more environmentally friendly way.

Efficient organic solar cells processed from hydrocarbon solvents

The use of two, rather than one, donor polymers in an organic solar cell is shown to enhance charge separation, transport and recombination.

Ternary blend polymer solar cells with enhanced power conversion efficiency

This article describes a cooperative plasmonic effect on improving the performance of polymer bulk heterojunction solar cells. When mixed Ag and Au nanoparticles are incorporated into the anode buffer layer, dual nanoparticles show superior behavior on enhancing light absorption in comparison with single nanoparticles, which led to the realization of a polymer solar cell with a power conversion efficiency of 8.67%, accounting for a 20% enhancement. The cooperative plasmonic effect aroused from dual resonance enhancement of two different nanoparticles. The idea was further unraveled by comparing Au nanorods with Au nanoparticles for solar cell application. Detailed studies shed light into the influence of plasmonic nanostructures on exciton generation, dissociation, and charge recombination and transport inside thin film devices.

Cooperative Plasmonic Effect of Ag and Au Nanoparticles on Enhancing Performance of Polymer Solar Cells

The benefits of designing and constructing organic solar cells featuring more than a single donor and single acceptor material are discussed. In the past few years, ternary organic solar cells (OSCs) featuring multiple donor or acceptor materials in the active layer have emerged as a promising structure to simultaneously improve all solar cell parameters compared with traditional binary OSCs. Power conversion efficiencies around 10% have been achieved for conjugated polymers in a ternary structure, showing the great potential of ternary systems. In this review, we summarize progress in developing ternary OSCs and discuss many of the designs, chemistries and mechanisms that have been investigated. We conclude by highlighting the challenges and future directions for further development in the field of ternary blend OSCs.

Status and prospects for ternary organic photovoltaics

Solution processed single junction polymer solar cells (PSCs) have been developed from less than 1% power conversion efficiency (PCE) to beyond 9% PCE in the last decade. The significant efficiency improvement comes from progress in both rational design of donor polymers and innovation of device architectures. Among all the novel high efficient donor polymers, PTB7 stands out as the most widely used one for solar cell studies. Herein the recent development of PTB7 solar cells is reviewed. Detailed discussion of basic property, structure property relationship, morphology study, interfacial engineering, and inorganic nanomaterials incorporation is provided. Possible future directions for further increasing the performance of PTB7 solar cells are discussed.

Luyao Lu

Papers

Recent Advances in Bulk Heterojunction Polymer Solar Cells

Ternary blend polymer solar cells with enhanced power conversion efficiency

Cooperative Plasmonic Effect of Ag and Au Nanoparticles on Enhancing Performance of Polymer Solar Cells

Status and prospects for ternary organic photovoltaics

Understanding Low Bandgap Polymer PTB7 and Optimizing Polymer Solar Cells Based on It