http://aoatools.aua.gr/pilotec/files/bibliography/Biofuels%20(alcohols%20and%20biodiesel)%20applications%20as%20fuels%20for%20internal-4026835713/Biofuels%20(alcohols%20and%20biodiesel)%20applications%20as%20fuels%20for%20internal.pdf

Biofuels (alcohols and biodiesel) applications as fuels for internal combustion engines

In this chapter, we will restrict our attention to the ferrites and a few other closely related materials. The great interest in ferrites stems from their unique combination of a spontaneous magnetization and a high electrical resistivity. The observed magnetization results from the difference in the magnetizations of two non-equivalent sub-lattices of the magnetic ions in the crystal structure. Materials of this type should strictly be designated as “ferrimagnetic” and in some respects are more closely related to anti-ferromagnetic substances than they are to ferromagnetics in which the magnetization results from the parallel alignment of all the magnetic moments present. We shall not adhere to this special nomenclature except to emphasize effects, which are due to the existence of the sub-lattices.

Ferromagnetic materials

Progress and recent trends in biodiesel fuels

As a renewable, sustainable and alternative fuel for compression ignition engines, biodiesel instead of diesel has been increasingly fueled to study its effects on engine performances and emissions in the recent 10 years. But these studies have been rarely reviewed to favor understanding and popularization for biodiesel so far. In this work, reports about biodiesel engine performances and emissions, published by highly rated journals in scientific indexes, were cited preferentially since 2000 year. From these reports, the effect of biodiesel on engine power, economy, durability and emissions including regulated and non-regulated emissions, and the corresponding effect factors are surveyed and analyzed in detail. The use of biodiesel leads to the substantial reduction in PM, HC and CO emissions accompanying with the imperceptible power loss, the increase in fuel consumption and the increase in NOx emission on conventional diesel engines with no or fewer modification. And it favors to reduce carbon deposit and wear of the key engine parts. Therefore, the blends of biodiesel with small content in place of petroleum diesel can help in controlling air pollution and easing the pressure on scarce resources without significantly sacrificing engine power and economy. However, many further researches about optimization and modification on engine, low temperature performances of engine, new instrumentation and methodology for measurements, etc., should be performed when petroleum diesel is substituted completely by biodiesel.

http://www.abe-research.illinois.edu/pubs/T_Grift/EffectOfBiodieselOnEnginePerformancesAndEmissions.pdf

Effect of biodiesel on engine performances and emissions

The interest in using Jatropha curcas L. (JCL) as a feedstock for the production of bio-diesel is rapidly growing. The properties of the crop and its oil have persuaded investors, policy makers and clean development mechanism (CDM) project developers to consider JCL as a substitute for fossil fuels to reduce greenhouse gas emissions. However, JCL is still a wild plant of which basic agronomic properties are not thoroughly understood and the environmental effects have not been investigated yet. Gray literature reports are very optimistic on simultaneous wasteland reclamation capability and oil yields, further fueling the Jatropha bio-diesel hype. In this paper, we give an overview of the currently available information on the different process steps of the production process of bio-diesel from JCL, being cultivation and production of seeds, extraction of the oil, conversion to and the use of the bio-diesel and the by-products. Based on this collection of data and information the best available practice, the shortcomings and the potential environmental risks and benefits are discussed for each production step. The review concludes with a call for general precaution and for science to be applied. (C) 2008 Elsevier Ltd. All rights reserved.

/pdf/jatropha-bio-diesel-production-and-use-1d1xfxhutp.pdf

Jatropha bio-diesel production and use

In this work various methods of using vegetable oil (Jatropha oil) and methanol such as blending, transesterification and dual fuel operation were studied experimentally. A single cylinder direct injection diesel engine was used for this work. Tests were done at constant speed of 1500 rev min −1 at varying power outputs. In dual fuel operation the methanol to Jatropha oil ratio was maintained at 3:7 on the volume basis. This is close to the fraction of methanol used to prepare the ester with Jatropha oil. Brake thermal efficiency was better in the dual fuel operation and with the methyl ester of Jatropha oil as compared to the blend. It increased form 27.4% with neat Jatropha oil to a maximum of 29% with the methyl ester and 28.7% in the dual fuel operation. Smoke was reduced with all methods compared to neat vegetable oil operation. The values of smoke emission are 4.4 Bosch Smoke Units (BSU) with neat Jatropha oil, 4.1 BSU with the blend, 4 BSU with methyl ester of Jatropha oil and 3.5 BSU in the dual fuel operation. The Nitric Oxide (NO) level was lower with Jatropha oil compared to diesel. It was further reduced in dual fuel operation and the blend with methanol. Dual fuel operation showed higher hydrocarbon (HC) and carbon monoxide (CO) emissions than the ester and the blend. Ignition delay was higher with neat Jatropha oil. It increased further with the blend and in dual fuel operation. It was reduced with the ester. Peak pressure and rate of pressure rise were higher with all the methods compared to neat Jatropha oil operation. Jatropha oil and methyl ester showed higher diffusion combustion compared to standard diesel operation. However, dual fuel operation resulted in higher premixed combustion. On the whole it is concluded that transesterification of vegetable oils and methanol induction can significantly enhance the performance of a vegetable oil fuelled diesel engine.

An experimental comparison of methods to use methanol and Jatropha oil in a compression ignition engine

Use of hydrogen to enhance the performance of a vegetable oil fuelled compression ignition engine

Experimental investigations on the use of preheated animal fat as fuel in a compression ignition engine

http://web.mit.edu/nuwong/Public/Diesohol/Kumar_EtOH_Diesel_PartII_Fuel06.pdf

M. Senthil Kumar

Papers

An experimental comparison of methods to use methanol and Jatropha oil in a compression ignition engine

Use of hydrogen to enhance the performance of a vegetable oil fuelled compression ignition engine

Experimental investigations on the use of preheated animal fat as fuel in a compression ignition engine

Ethanol animal fat emulsions as a diesel engine fuel – Part 2: Engine test analysis

Complete Vegetable Oil Fueled Dual Fuel Compression Ignition Engine