Rayleigh, Brillouin and Raman scatterings in fibers result from the interaction of photons with local material characteristic features like density, temperature and strain. For example an acoustic/mechanical wave generates a dynamic density variation; such a variation may be affected by local temperature, strain, vibration and birefringence. By detecting changes in the amplitude, frequency and phase of light scattered along a fiber, one can realize a distributed fiber sensor for measuring localized temperature, strain, vibration and birefringence over lengths ranging from meters to one hundred kilometers. Such a measurement can be made in the time domain or frequency domain to resolve location information. With coherent detection of the scattered light one can observe changes in birefringence and beat length for fibers and devices. The progress on state of the art technology for sensing performance, in terms of spatial resolution and limitations on sensing length is reviewed. These distributed sensors can be used for disaster prevention in the civil structural monitoring of pipelines, bridges, dams and railroads. A sensor with centimeter spatial resolution and high precision measurement of temperature, strain, vibration and birefringence can find applications in aerospace smart structures, material processing, and the characterization of optical materials and devices.

Recent progress in distributed fiber optic sensors.

The application of structural health monitoring (SHM) systems to civil engineering structures has been a developing studied and practiced topic, that has allowed for a better understanding of structures’ conditions and increasingly lead to a more cost-effective management of those infrastructures In this field, the use of fiber optic sensors has been studied, discussed and practiced with encouraging results The possibility of understanding and monitor the distributed behavior of extensive stretches of critical structures it’s an enormous advantage that distributed fiber optic sensing provides to SHM systems In the past decade, several R & D studies have been performed with the goal of improving the knowledge and developing new techniques associated with the application of distributed optical fiber sensors (DOFS) in order to widen the range of applications of these sensors and also to obtain more correct and reliable data This paper presents, after a brief introduction to the theoretical background of DOFS, the latest developments related with the improvement of these products by presenting a wide range of laboratory experiments as well as an extended review of their diverse applications in civil engineering structures

A review of distributed optical fiber sensors for civil engineering applications

Brillouin scattering in optical fiber describes the interaction of an electro-magnetic field (photon) with a characteristic density variation of the fiber. When the electric field amplitude of an optical beam (so-called pump wave), and another wave is introduced at the downshifted Brillouin frequency (namely Stokes wave), the beating between the pump and Stokes waves creates a modified density change via the electrostriction effect, resulting in so-called the stimulated Brillouin scattering. The density variation is associated with a mechanical acoustic wave; and it may be affected by local temperature, strain, and vibration which induce changes in the fiber effective refractive index and sound velocity. Through the measurement of the static or dynamic changes in Brillouin frequency along the fiber one can realize a distributed fiber sensor for local temperature, strain and vibration over tens or hundreds of kilometers. This paper reviews the progress on improving sensing performance parameters like spatial resolution, sensing length limitation and simultaneous temperature and strain measurement. These kinds of sensors can be used in civil structural monitoring of pipelines, bridges, dams, and railroads for disaster prevention. Analogous to the static Bragg grating, one can write a moving Brillouin grating in fibers, with the lifetime of the acoustic wave. The length of the Brillouin grating can be controlled by the writing pulses at any position in fibers. Such gratings can be used to measure changes in birefringence, which is an important parameter in fiber communications. Applications for this kind of sensor can be found in aerospace, material processing and fine structures.

Recent progress in Brillouin scattering based fiber sensors.

In-service structural health monitoring of composite aircraft structures plays a key role in the assessment of their performance and integrity. In recent years, Fibre Optic Sensors (FOS) have proved to be a potentially excellent technique for real-time in-situ monitoring of these structures due to their numerous advantages, such as immunity to electromagnetic interference, small size, light weight, durability, and high bandwidth, which allows a great number of sensors to operate in the same system, and the possibility to be integrated within the material. However, more effort is still needed to bring the technology to a fully mature readiness level. In this paper, recent research and applications in structural health monitoring of composite aircraft structures using FOS have been critically reviewed, considering both the multi-point and distributed sensing techniques.

/pdf/fibre-optic-sensors-for-structural-health-monitoring-of-izgdedczqo.pdf

Fibre Optic Sensors for Structural Health Monitoring of Aircraft Composite Structures: Recent Advances and Applications.

We propose a Brillouin optical correlation-domain reflectometry (BOCDR), which can measure the distribution of strain and/or temperature along an optical fiber from a single end, by detecting spontaneous Brillouin scattering with controlling the interference of continuous lightwaves. In a pulse-based conventional Brillouin optical time-domain reflectometry (BOTDR), it is difficult in principle to achieve a spatial resolution less than 1 m, and the measurement time is as long as 5-10 minutes. On the contrary, the continuous-wave-based BOCDR can exceed the limit of 1-m resolution, and realize much faster measurement and random access to measuring positions. Spatial resolution of 40 cm was experimentally demonstrated with sampling rate of 50 Hz.

Proposal of Brillouin optical correlation-domain reflectometry (BOCDR)

This letter describes improvement in the spatial resolution of distributed fiber Brillouin strain sensing by the correlation-based continuous-wave technique, which we proposed previously. The spatial resolution of 1 cm has been achieved for a partly stretched fiber. This result shows the technique is applicable to smart structures or materials as a nervous system to monitor strain distribution.

Distributed fiber Brillouin strain sensing with 1-cm spatial resolution by correlation-based continuous-wave technique

In this letter, we demonstrate a smart material using our technique utilizing correlation between pump-and-probe lightwaves for fiber optic distributed strain sensing with Brillouin scattering. This technique enables centimeter-order spatial resolution, which is 100 times higher than that in conventional pulsed-lightwave techniques. This letter describes verification of usefulness of the correlation-based continuous-wave technique for smart material applications. Strain distribution on the surface of a small ring is obtained with 1-cm spatial resolution.

M. Tanaka

Papers

Distributed fiber Brillouin strain sensing with 1-cm spatial resolution by correlation-based continuous-wave technique

Application of correlation-based continuous-wave technique for fiber Brillouin sensing to measurement of strain distribution on a small size material