Although the concept of variable-speed drives, based on utilization of multiphase machines, dates back to the late 1960s, it was not until the mid- to late 1990s that multiphase drives became serious contenders for various applications. These include electric ship propulsion, locomotive traction, electric and hybrid electric vehicles, ldquomore-electricrdquo aircraft, and high-power industrial applications. As a consequence, there has been a substantial increase in the interest for such drive systems worldwide, resulting in a huge volume of work published during the last ten years. An attempt is made in this paper to provide a brief review of the current state of the art in the area. After addressing the reasons for potential use of multiphase rather than three-phase drives and the available approaches to multiphase machine designs, various control schemes are surveyed. This is followed by a discussion of the multiphase voltage source inverter control. Various possibilities for the use of additional degrees of freedom that exist in multiphase machines are further elaborated. Finally, multiphase machine applications in electric energy generation are addressed.

Multiphase Electric Machines for Variable-Speed Applications

The area of multiphase variable-speed motor drives in general and multiphase induction motor drives in particular has experienced a substantial growth since the beginning of this century. Research has been conducted worldwide and numerous interesting developments have been reported in the literature. An attempt is made to provide a detailed overview of the current state-of-the-art in this area. The elaborated aspects include advantages of multiphase induction machines, modelling of multiphase induction machines, basic vector control and direct torque control schemes and PWM control of multiphase voltage source inverters. The authors also provide a detailed survey of the control strategies for five-phase and asymmetrical six-phase induction motor drives, as well as an overview of the approaches to the design of fault tolerant strategies for post-fault drive operation, and a discussion of multiphase multi-motor drives with single inverter supply. Experimental results, collected from various multiphase induction motor drive laboratory rigs, are also included to facilitate the understanding of the drive operation.

/pdf/multiphase-induction-motor-drives-a-technology-status-review-1ir91893ja.pdf

Multiphase induction motor drives - : a technology status review

This paper addresses to some of the latest contributions on the application of Finite Control Set Model Predictive Control (FCS-MPC) in Power Electronics. In FCS-MPC , the switching states are directly applied to the power converter, without the need of an additional modulation stage. The paper shows how the use of FCS-MPC provides a simple and efficient computational realization for different control objectives in Power Electronics. Some applications of this technology in drives, active filters, power conditioning, distributed generation and renewable energy are covered. Finally, attention is paid to the discussion of new trends in this technology and to the identification of open questions and future research topics.

State of the Art of Finite Control Set Model Predictive Control in Power Electronics

This paper presents an overview of motor drive technologies used for safety-critical aerospace applications, with a particular focus placed on the choice of candidate machines and their drive topologies. Aircraft applications demand high reliability, high availability, and high power density while aiming to reduce weight, complexity, fuel consumption, operational costs, and environmental impact. New electric driven systems can meet these requirements and also provide significant technical and economic improvements over conventional mechanical, hydraulic, or pneumatic systems. Fault-tolerant motor drives can be achieved by partitioning and redundancy through the use of multichannel three-phase systems or multiple single-phase modules. Analytical methods are adopted to compare caged induction, reluctance, and PM motor technologies and their relative merits. The analysis suggests that the dual (or triple) three-phase PMAC motor drive may be a favored choice for general aerospace applications, striking a balance between necessary redundancy and undue complexity, while maintaining a balanced operation following a failure. The modular single-phase approach offers a good compromise between size and complexity but suffers from high total harmonic distortion of the supply and high torque ripple when faulted. For each specific aircraft application, a parametrical optimization of the suitable motor configuration is needed through a coupled electromagnetic and thermal analysis, and should be verified by finite-element analysis.

Overview of Electric Motor Technologies Used for More Electric Aircraft (MEA)

This paper presents a comprehensive study on the state-of-the-art and emerging wind energy technologies from the electrical engineering perspective. In an attempt to decrease cost of energy, increase the wind energy conversion efficiency, reliability, power density, and comply with the stringent grid codes, the electric generators and power electronic converters have emerged in a rigorous manner. From the market based survey, the most successful generator-converter configurations are addressed along with few promising topologies available in the literature. The back-to-back connected converters, passive generator-side converters, converters for multiphase generators, and converters without intermediate dc-link are investigated for high-power wind energy conversion systems (WECS), and presented in low and medium voltage category. The onshore and offshore wind farm configurations are analyzed with respect to the series/parallel connection of wind turbine ac/dc output terminals, and high voltage ac/dc transmission. The fault-ride through compliance methods used in the induction and synchronous generator based WECS are also discussed. The past, present and future trends in megawatt WECS are reviewed in terms of mechanical and electrical technologies, integration to power systems, and control theory. The important survey results, and technical merits and demerits of various WECS electrical systems are summarized by tables. The list of current and future wind turbines are also provided along with technical details.

High-Power Wind Energy Conversion Systems: State-of-the-Art and Emerging Technologies

Open-end winding three-phase variable speed drives with dual-inverter supply have been extensively investigated for various applications, including series hybrid powertrains and propulsion motors. The topology is simple to realize while offering a higher number of switching states without the need for capacitor voltage balancing algorithms, when compared to the standard multilevel converters. This paper extends the open-end winding concept to a five-phase drive. A relatively simple space-vector modulation (SVM) algorithm, based on the already well-understood five-phase two-level drive SVM method, is developed. The proposed modulation technique has the advantage of being straightforward to implement and, like its two-level counterpart, is able to generate output voltages with minimum low-order harmonic content. The method generates up to 17-level output phase voltage and, therefore, offers superior harmonic performance when compared to the two-level five-phase modulation. The developed scheme is verified via detailed simulations and experiments, using a five-phase induction machine operating under open-loop V/f control.

A Space-Vector Modulation Scheme for Multilevel Open-End Winding Five-Phase Drives

This paper reports on flux harmonic distortion factor and current ripple analysis for various discontinuous pulse-width-modulation (PWM) techniques, which are applicable in conjunction with five-phase two-level inverter-fed induction motors. The analysis is based on the application of the complex space vector approach. The results are compared throughout with the corresponding continuous PWM techniques. Different space vector PWM and carrier-based PWM methods are encompassed by the analysis. This paper is supported by extensive simulation results. Verification of theoretical findings is provided through experimental measurements on a five-phase induction motor.

Comparative Analysis of Discontinuous and Continuous PWM Techniques in VSI-Fed Five-Phase Induction Motor

A Literature Survey of State-Of-The-Art in Multiphase AC Drives

A two-motor drive, supplied by a five-leg inverter, is considered in this paper. The independent control of machines with full dc-bus voltage utilization is typically achieved using an existing pulsewidth modulation (PWM) technique in conjunction with field-oriented control, based on PI current control. However, model predictive control (MPC), based on a finite number of control inputs [finite-control-set MPC (FCS-MPC)], does not utilize a pulsewidth modulator. This paper introduces three FCS-MPC schemes for synchronous current control in this drive system. The first scheme uses all of the available switching states. The second and third schemes are aimed at reducing the computational burden and utilize a reduced set of voltage vectors and a duty ratio partitioning principle, respectively. Steady-state and transient performances are analyzed and compared both against each other and with respect to the field-oriented control based on PI controllers and PWM. All analyses are experimental and use the same experimental rig and test conditions. Comparison of the predictive schemes leads to the conclusion that the first two schemes have the fastest transient response. The third scheme has a much smaller current ripple while achieving perfect control decoupling between the machines and is of low computational complexity. Nevertheless, at approximately the same switching loss, the PI-PWM control yields the lowest current ripple but with slower electrical transient response.

/pdf/a-comparative-study-of-synchronous-current-control-schemes-3jsof5s63a.pdf

A Comparative Study of Synchronous Current Control Schemes Based on FCS-MPC and PI-PWM for a Two-Motor Three-Phase Drive

This paper considers two isolated solutions for fast charging of electric vehicles (EVs). The isolation is located on the grid side (off board), whereas the rest of the charging apparatus is placed on board the EV, and it entirely consists of the existing power electronics components that would be otherwise used only for propulsion. Thus, substantial savings on space, weight, and cost are achieved. The considered configurations fully incorporate either a symmetrical or an asymmetrical six-phase machine, as well as a six-phase inverter, into the charging process. Due to the nature of the connections, torque production is avoided during the charging/vehicle-to-grid (V2G) modes of operation. Thus, the machines do not have to be mechanically locked, and their rotors naturally stay at standstill. Control schemes for both configurations are elaborated, and theoretical results are validated by experiments for the two configurations in both charging and V2G modes.

/pdf/isolated-chargers-for-evs-incorporating-six-phase-machines-4v33oi1uc4.pdf

Martin Jones

Papers

A Space-Vector Modulation Scheme for Multilevel Open-End Winding Five-Phase Drives

Comparative Analysis of Discontinuous and Continuous PWM Techniques in VSI-Fed Five-Phase Induction Motor

A Literature Survey of State-Of-The-Art in Multiphase AC Drives

A Comparative Study of Synchronous Current Control Schemes Based on FCS-MPC and PI-PWM for a Two-Motor Three-Phase Drive

Isolated Chargers for EVs Incorporating Six-Phase Machines