Singular Integral Equations. By N.I. Muskhelishvili. Translated fromthe 2nd Russian edition by J.R.M. Radok. Pp. 447. F1. 28.50. 1953. (Noordhoff, Groningen)

OUTPU T 29 OUTPU T 30 OUTPU T 31 OUTPU T 32 OUTPU T 25 OUTPU T 26 OUTPU T 27 OUTPU T 28 OUTPU T 21 OUTPU T 22 OUTPU T 23 OUTPU T 24 OUTPU T 17 OUTPU T 18 OUTPU T 19 OUTPU T 20 OUTPU T 13 OUTPU T 14 OUTPU T 15 OUTPU T 16 OUTPU T 9 OUTPU T 10 OUTPU T 11 OUTPU T 12 OUTPU T 5 OUTPU T 6 OUTPU T 7 OUTPU T 8 OUTPU T 1 OUTPU T 2 OUTPU T 3 OUTPU T 4 29 30 31 32 25 26 27 28 21 22 23 24 17 18 19 20 13 14 15 16 9

A User’s Guide

The validity of the cubic law for laminar flow of fluids through open fractures consisting of parallel planar plates has been established by others over a wide range of conditions with apertures ranging down to a minimum of 0.2 µm. The law may be given in simplified form by Q/Δh = C(2b)3, where Q is the flow rate, Δh is the difference in hydraulic head, C is a constant that depends on the flow geometry and fluid properties, and 2b is the fracture aperture. The validity of this law for flow in a closed fracture where the surfaces are in contact and the aperture is being decreased under stress has been investigated at room temperature by using homogeneous samples of granite, basalt, and marble. Tension fractures were artificially induced, and the laboratory setup used radial as well as straight flow geometries. Apertures ranged from 250 down to 4µm, which was the minimum size that could be attained under a normal stress of 20 MPa. The cubic law was found to be valid whether the fracture surfaces were held open or were being closed under stress, and the results are not dependent on rock type. Permeability was uniquely defined by fracture aperture and was independent of the stress history used in these investigations. The effects of deviations from the ideal parallel plate concept only cause an apparent reduction in flow and may be incorporated into the cubic law by replacing C by C/ƒ. The factor ƒ varied from 1.04 to 1.65 in these investigations. The model of a fracture that is being closed under normal stress is visualized as being controlled by the strength of the asperities that are in contact. These contact areas are able to withstand significant stresses while maintaining space for fluids to continue to flow as the fracture aperture decreases. The controlling factor is the magnitude of the aperture, and since flow depends on (2b)3, a slight change in aperture evidently can easily dominate any other change in the geometry of the flow field. Thus one does not see any noticeable shift in the correlations of our experimental results in passing from a condition where the fracture surfaces were held open to one where the surfaces were being closed under stress.

/pdf/validity-of-cubic-law-for-fluid-flow-in-a-deformable-rock-2ynq4id3hq.pdf

VALIDITY OF CUBIC LAW FOR FLUID FLOW IN A DEFORMABLE ROCK FRACTURE - eScholarship

The flow of homogeneous fluids through porous media: analogies with other physical problems

The present invention relates to engineered multivalent and multispecific binding proteins, methods of making, and specifically to their uses in the prevention, diagnosis, and/or treatment of disease.

Dual variable domain immunoglobulins and uses thereof

Publisher Summary Time-dependent deformation is continued deformation without a stress change. Creep strain seldom can be recovered fully when loads are removed, thus it is largely plastic deformation, Rarely, primary creep strain may be recovered without fabric damage when stresses are returned to their original state. All rocks creep upon undergoing a load change. Commonly it terminates in a few minutes or hours, or is so small that it can be ignored in design. Most rocks creep appreciably only at T and [σ] values not encountered in engineering structures. Creep and rupture are issues in cases of high point loads, aggressive water chemistry, or tensile stresses that lead to time-dependent fracture growth. These cases may be difficult to simulate in the laboratory, and field quantification may be challenging.

Time-dependent Behavior of Rocks

Pressure Pulse Workovers in Heavy Oil

Borehole Yield and Hydraulic Fracture Initiation in Poorly Consolidated Rock Strata. Part II. Permeable Media.

Geomechanics of thermal viscous oil production in sandstones

Gravity drainage is considered to be the main mechanism in primary oil production from naturally fractured reservoirs, but mathematical models to adequately predict the oil recovery and flux rate b...

Maurice B. Dusseault

Papers

Time-dependent Behavior of Rocks

Pressure Pulse Workovers in Heavy Oil

Borehole Yield and Hydraulic Fracture Initiation in Poorly Consolidated Rock Strata. Part II. Permeable Media.

Geomechanics of thermal viscous oil production in sandstones

Empirical Modeling of Gravity Drainage in Fractured Porous Media