There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality.

Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

I and i

This paper presents a study of a novel monopole antenna for ultrawide-band (UWB) applications. Printed on a dielectric substrate and fed by a 50 /spl Omega/ microstrip line, a planar circular disc monopole has been demonstrated to provide an ultra wide 10 dB return loss bandwidth with satisfactory radiation properties. The parameters which affect the performance of the antenna in terms of its frequency domain characteristics are investigated. A good agreement is achieved between the simulation and the experiment. In addition, the time domain performance of the proposed antenna is also evaluated in simulations.

Study of a printed circular disc monopole antenna for UWB systems

Preface 1. Introduction 2. FDTD Method for periodic structure analysis 3. EBG Characterizations and classifications 4. Design and optimizations of EBG structures 5. Patch antennas with EBG structures 6. Low profile wire antennas on EBG surfaces 7. Surface wave antennas Appendix: EBG literature review.

/pdf/electromagnetic-band-gap-structures-in-antenna-engineering-luh3tdu8zr.pdf

Electromagnetic Band Gap Structures in Antenna Engineering

The objective of this paper is to summarize the work that has been developed by the authors for the last several years, in order to demonstrate that the Theory of Characteristic Modes can be used to perform a systematic design of different types of antennas. Characteristic modes are real current modes that can be computed numerically for conducting bodies of arbitrary shape. Since characteristic modes form a set of orthogonal functions, they can be used to expand the total current on the surface of the body. However, this paper shows that what makes characteristic modes really attractive for antenna design is the physical insight they bring into the radiating phenomena taking place in the antenna. The resonance frequency of modes, as well as their radiating behavior, can be determined from the information provided by the eigenvalues associated with the characteristic modes. Moreover, by studying the current distribution of modes, an optimum feeding arrangement can be found in order to obtain the desired radiating behavior.

The Theory of Characteristic Modes Revisited: A Contribution to the Design of Antennas for Modern Applications

A small printed antenna is described with a reduced ground-plane effect for ultrawideband (UWB) applications. The radiator and ground plane of the antenna are etched onto a piece of printed circuit board (PCB) with an overall size of 25mmtimes25 mmtimes1.5 mm. A notch is cut from the radiator while a strip is asymmetrically attached to the radiator. The simulation and measurement show that the miniaturized antenna achieves a broad operating bandwidth of 2.9-11.6 GHz for a 10-dB return loss. In particular, the ground-plane effect on impedance performance is greatly reduced by cutting the notch from the radiator because the electric currents on the ground plane are significantly suppressed at the lower edge operating frequencies. The antenna features three-dimensional omni-directional radiation with high radiation efficiency of 79%-95% across the UWB bandwidth. In addition, a parametric study of the geometric and electric parameters of the proposed antenna will be able to provide antenna engineers with more design information

Small Printed Ultrawideband Antenna With Reduced Ground Plane Effect

The planar monopole antenna is shown to provide extremely wideband impedance characteristics. Recently, many techniques to tailor and optimize the impedance bandwidth of these antennas have been investigated. These include the use of bevels, slots and shorting posts. These antennas are becoming popular, and have been proposed for modern and future wideband wireless applications. The radiation performance is also shown to be acceptable over a wide frequency range.

Wideband monopole antennas for multi-band wireless systems

A new wide-band shorted planar monopole with a bevel is presented The numerical simulations and measurements demonstrate that the impedance bandwidth of a wide-band planar square monopole is shown to increase dramatically by combining bevelling and a shorting technique The radiation pattern stability is also discussed

/pdf/a-wide-band-shorted-planar-monopole-with-bevel-5c03csniuj.pdf

A wide-band shorted planar monopole with bevel

Wideband planar monopole antennas have recently been proposed for use on digital mobile terminals. The square planar monopole is the simplest to analyze, and suffers little degradation of radiation pattern within the impedance bandwidth. The addition of a bevel on one or both sides of the feed probe is shown to increase the bandwidth with good control of the upper edge frequency. The impedance bandwidth ratio for this antenna is shown to vary from 2:1 to 6:1, which can be controlled by beveling the planar geometry. © 2001 John Wiley & Sons, Inc. Microwave Opt Technol Lett 30: 229–232, 2001.

Control of the impedance bandwidth of wideband planar monopole antennas using a beveling technique

This article reviews the state of the art in broadband antennas for emerging UWB applications and addresses the important issues of the broadband antenna design for UWB applications. First, a variety of planar monopoles with finite ground planes are reviewed. Next, the roll antennas with enhanced radiation performance are outlined. After that, the planar antennas printed on PCBs are described. A directional antipodal Vivaldi antenna is also presented for UWB applications. Last, a UWB antenna for wearable applications is exemplified

Planar antennas

A planar monopole may be realised by replacing the wire element of a conventional monopole with a planar element. In this case, the planar element which is square, is located above a groundplane and fed using an SMA connector as illustrated. The square monopole has a simple geometry and a smaller bandwidth compared to the circular-disc monopole. However, it is still a broadband antenna with a typical impedance bandwidth of 75 % at S band. This broadband antenna shows a constant radiation pattern over the impedance bandwidth. A simple formula for the frequency corresponding to the lower edge of the impedance bandwidth, which has an accuracy of ±8.5 % over the frequency range 1 GHz to 6 GHz, is proposed. The effect of the feedgap distance is also examined.

/pdf/square-planar-monopole-antenna-3tahrrhk8l.pdf

Max J. Ammann

Papers

Wideband monopole antennas for multi-band wireless systems

A wide-band shorted planar monopole with bevel

Control of the impedance bandwidth of wideband planar monopole antennas using a beveling technique

Planar antennas

Square Planar Monopole Antenna