A review on biodiesel production using catalyzed transesterification

Biodiesel is a renewable transportation fuel consisting of fatty acid methyl esters (FAME), generally produced by transesterification of vegetable oils and animal fats. In this review, the fatty acid (FA) profiles of 12 common biodiesel feedstocks were summarized. Considerable compositional variability exists across the range of feedstocks. For example, coconut, palm and tallow contain high amounts of saturated FA; while corn, rapeseed, safflower, soy, and sunflower are dominated by unsaturated FA. Much less information is available regarding the FA profiles of algal lipids that could serve as biodiesel feedstocks. However, some algal species contain considerably higher levels of poly-unsaturated FA than is typically found in vegetable oils. Differences in chemical and physical properties among biodiesel fuels can be explained largely by the fuels’ FA profiles. Two features that are especially influential are the size distribution and the degree of unsaturation within the FA structures. For the 12 biodiesel types reviewed here, it was shown that several fuel properties – including viscosity, specific gravity, cetane number, iodine value, and low temperature performance metrics – are highly correlated with the average unsaturation of the FAME profiles. Due to opposing effects of certain FAME structural features, it is not possible to define a single composition that is optimum with respect to all important fuel properties. However, to ensure satisfactory in-use performance with respect to low temperature operability and oxidative stability, biodiesel should contain relatively low concentrations of both long-chain saturated FAME and poly-unsaturated FAME.

Review of biodiesel composition, properties, and specifications

The world is confronted with the twin crises of fossil fuel depletion and environmental degradation. The indiscriminate extraction and consumption of fossil fuels have led to a reduction in petroleum reserves. Petroleum based fuels are obtained from limited reserves. These finite reserves are highly concentrated in certain region of the world. Therefore, those countries not having these resources are facing a foreign exchange crisis, mainly due to the import of crude petroleum oil. Hence it is necessary to look for alternative fuels, which can be produced from materials available within the country. Although vegetative oils can be fuel for diesel engines, but their high viscosities, low volatilities and poor cold flow properties have led to the investigation of its various derivatives. Among the different possible sources, fatty acid methyl esters, known as Biodiesel fuel derived from triglycerides (vegetable oil and animal fates) by transesterification with methanol, present the promising alternative substitute to diesel fuels and have received the most attention now a day. The main advantages of using Biodiesel are its renewability, better quality exhaust gas emission, its biodegradability and the organic carbon present in it is photosynthetic in origin. It does not contribute to a rise in the level of carbon dioxide in the atmosphere and consequently to the green house effect. This paper reviews the source of production and characterization of vegetable oils and their methyl ester as the substitute of the petroleum fuel and future possibilities of Biodiesel production.

Biodiesel production through the use of different sources and characterization of oils and their esters as the substitute of diesel: A review

As a renewable, sustainable and alternative fuel for compression ignition engines, biodiesel instead of diesel has been increasingly fueled to study its effects on engine performances and emissions in the recent 10 years. But these studies have been rarely reviewed to favor understanding and popularization for biodiesel so far. In this work, reports about biodiesel engine performances and emissions, published by highly rated journals in scientific indexes, were cited preferentially since 2000 year. From these reports, the effect of biodiesel on engine power, economy, durability and emissions including regulated and non-regulated emissions, and the corresponding effect factors are surveyed and analyzed in detail. The use of biodiesel leads to the substantial reduction in PM, HC and CO emissions accompanying with the imperceptible power loss, the increase in fuel consumption and the increase in NOx emission on conventional diesel engines with no or fewer modification. And it favors to reduce carbon deposit and wear of the key engine parts. Therefore, the blends of biodiesel with small content in place of petroleum diesel can help in controlling air pollution and easing the pressure on scarce resources without significantly sacrificing engine power and economy. However, many further researches about optimization and modification on engine, low temperature performances of engine, new instrumentation and methodology for measurements, etc., should be performed when petroleum diesel is substituted completely by biodiesel.

http://www.abe-research.illinois.edu/pubs/T_Grift/EffectOfBiodieselOnEnginePerformancesAndEmissions.pdf

Effect of biodiesel on engine performances and emissions

Review of high efficiency and clean reactivity controlled compression ignition (RCCI) combustion in internal combustion engines

Biodiesel engine performance and emissions in low temperature combustion

Clean combustion of n-butanol as a next generation biofuel for diesel engines

Fuel Injection Strategies to Improve Emissions and Efficiency of High Compression Ratio Diesel Engines

The lowered combustion temperature in diesel engines is capable of reducing nitrogen oxides and soot simultaneously, which can be implemented by the heavy use of exhaust gas recirculation (EGR) or the homogeneous charge compression ignition (HCCI) type of combustion. However, the fuel efficiency of the low-temperature combustion (LTC) cycles is commonly compromised by the high levels of hydrocarbon and carbon monoxide emissions. More seriously, the scheduling of fuel delivery in HCCI engines has lesser leverage on the exact timing of auto-ignition that may even occur before the compression stroke is completed, which may cause excessive efficiency reduction and combustion roughness. New LTC control strategies have been explored experimentally to achieve ultralow emissions under independently controlled EGR, intake boost, exhaust backpressure, and multi-event fuel-injection events. Empirical comparisons have been made between the fuel efficiencies of LTC and conventional diesel cycles. Preliminary adaptive control strategies based on cylinder pressure characteristics have been implemented to enable and stabilize the LTC when heavy EGR is applied. The impact of heat-release phasing, duration, shaping, and splitting on the thermal efficiency has also been analyzed with engine cycle simulations. This research intends to identify the major parameters that affect diesel LTC engine thermal efficiency. Copyright © 2008 John Wiley & Sons, Ltd.

Meiping Wang

Papers

Biodiesel engine performance and emissions in low temperature combustion

Clean combustion of n-butanol as a next generation biofuel for diesel engines

Fuel Injection Strategies to Improve Emissions and Efficiency of High Compression Ratio Diesel Engines

Energy efficiency improvement strategies for a diesel engine in low‐temperature combustion

Thermal Efficiency Analyses of Diesel Low Temperature Combustion Cycles