Iterative model-building, structure refinement, and density modification with the PHENIX AutoBuild Wizard Thomas C. Terwilliger a* , Ralf W. Grosse-Kunstleve b , Pavel V. Afonine b , Nigel W. Moriarty b , Peter Zwart b , Li-Wei Hung a , Randy J. Read c , Paul D. Adams b* a b Los Alamos National Laboratory, Mailstop M888, Los Alamos, NM 87545, USA Lawrence Berkeley National Laboratory, One Cyclotron Road, Bldg 64R0121, Berkeley, CA 94720, USA. c Department of Haematology, University of Cambridge, Cambridge CB2 0XY, UK. * Email: terwill@lanl.gov or PDAdams@lbl.gov Running title: The PHENIX AutoBuild Wizard Abstract The PHENIX AutoBuild Wizard is a highly automated tool for iterative model- building, structure refinement and density modification using RESOLVE or TEXTAL model- building, RESOLVE statistical density modification, and phenix.refine structure refinement. Recent advances in the AutoBuild Wizard and phenix.refine include automated detection and application of NCS from models as they are built, extensive model completion algorithms, and automated solvent molecule picking. Model completion algorithms in the AutoBuild Wizard include loop-building, crossovers between chains in different models of a structure, and side-chain optimization. The AutoBuild Wizard has been applied to a set of 48 structures at resolutions ranging from 1.1 A to 3.2 A, resulting in a mean R-factor of 0.24 and a mean free R factor of 0.29. The R-factor of the final model is dependent on the quality of the starting electron density, and relatively independent of resolution. Keywords: Model building; model completion; macromolecular models; Protein Data Bank; structure refinement; PHENIX Introduction Iterative model-building and refinement is a powerful approach to obtaining a complete and accurate macromolecular model. The approach consists of cycles of building an atomic model based on an electron density map for a macromolecular structure, refining the structure, using the refined structure as a basis for improving the map, and building a new model. This type of approach has been carried out in a semi-automated fashion for many years, with manual model-building iterating with automated refinement (Jensen, 1997). More recently, with the development first of ARP/wARP (Perrakis et al., 1999), and later other procedures including RESOLVE iterative model-building and refinement (Terwilliger,

Iterative model-building, structure refinement, and density modification with the PHENIX AutoBuild Wizard

HIV-1 gag proteins: diverse functions in the virus life cycle.

The three-dimensional structure of the human immunodeficiency virus–type 1 (HIV-1) nucleocapsid protein (NC) bound to the SL3 stem-loop recognition element of the genomic Ψ RNA packaging signal has been determined by heteronuclear magnetic resonance spectroscopy. Tight binding (dissociation constant, ∼100 nM) is mediated by specific interactions between the amino- and carboxyl-terminal CCHC-type zinc knuckles of the NC protein and the G7 and G9 nucleotide bases, respectively, of the G6-G7-A8-G9 RNA tetraloop. A8 packs against the amino-terminal knuckle and forms a hydrogen bond with conserved Arg32, and residues Lys3 to Arg10 of NC form a 310helix that binds to the major groove of the RNA stem and also packs against the amino-terminal zinc knuckle. The structure provides insights into the mechanism of viral genome recognition, explains extensive amino acid conservation within NC, and serves as a basis for the development of inhibitors designed to interfere with genome encapsidation.

http://science.sciencemag.org/content/sci/279/5349/384.full.pdf

Structure of the HIV-1 Nucleocapsid Protein Bound to the SL3 Ψ-RNA Recognition Element

The seasonal cycle of respiratory viral diseases has been widely recognized for thousands of years, as annual epidemics of the common cold and influenza disease hit the human population like clockwork in the winter season in temperate regions. Moreover, epidemics caused by viruses such as severe acute respiratory syndrome coronavirus (SARS-CoV) and the newly emerging SARS-CoV-2 occur during the winter months. The mechanisms underlying the seasonal nature of respiratory viral infections have been examined and debated for many years. The two major contributing factors are the changes in environmental parameters and human behavior. Studies have revealed the effect of temperature and humidity on respiratory virus stability and transmission rates. More recent research highlights the importance of the environmental factors, especially temperature and humidity, in modulating host intrinsic, innate, and adaptive immune responses to viral infections in the respiratory tract. Here we review evidence of how outdoor and indoor climates are linked to the seasonality of viral respiratory infections. We further discuss determinants of host response in the seasonality of respiratory viruses by highlighting recent studies in the field. Expected final online publication date for the Annual Review of Virology, Volume 7 is September 29, 2020. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

https://www.annualreviews.org/doi/pdf/10.1146/annurev-virology-012420-022445

Seasonality of Respiratory Viral Infections.

The human immunodeficiency virus type 1 (HIV-1) Gag protein precursor, Pr55Gag, contains at its C-terminal end a proline-rich, 6-kDa domain designated p6. Two functions have been proposed for p6: incorporation of the HIV-1 accessory protein Vpr into virus particles and virus particle production. To characterize the role of p6 in the HIV-1 life cycle and to map functional domains within p6, we introduced a number of nonsense and single and multiple amino acid substitution mutations into p6. Following the introduction of the mutations into the full-length HIV-1 molecular clone pNL4-3, the effects on Gag protein expression and processing, virus particle production, and virus infectivity were analyzed. The production of mutant virus particles was also examined by transmission electron microscopy. The results indicate that (i) p6 is required for efficient virus particle production from a full-length HIV-1 molecular clone; (ii) a Pro-Thr-Ala-Pro sequence, located between residues 7 and 10 of p6, is critical for virus particle production; (iii) mutations outside the Pro-Thr-Ala-Pro motif have little or no effect on virus assembly and release; (iv) the p6 defect is manifested at a late stage in the budding process; and (v) mutations in p6 that severely reduce virion production in HeLa cells also block or significantly delay the establishment of a productive infection in the CEM (12D-7) T-cell line. We further demonstrate that mutational inactivation of the viral protease reverses the p6 defect, suggesting a functional linkage between p6 and the proteolytic processing of the Gag precursor protein during the budding of progeny virions.

p6Gag is required for particle production from full-length human immunodeficiency virus type 1 molecular clones expressing protease.

https://www.clinicalmicrobiologyandinfection.com/article/S1198-743X(14)63294-8/pdf

Rhinoviruses delayed the circulation of the pandemic influenza A (H1N1) 2009 virus in France

Nucleocapsid protein (NCp7) of human immunodeficiency virus type 1 is found covering the genomic RNA in the interior of the viral particle. It is a highly basic protein with two zinc fingers of the form CX2CX4HX4C which exhibit strong affinity for a zinc cation. To study the structure-function relationship of the N-terminal zinc finger of NCp7, this domain was either deleted or changed to CX2CX4CX4C. We examined virus formation and structure as well as proviral DNA synthesis. Our data show that these two NC mutations result in the formation of particles with an abnormal core morphology and impair the end of proviral DNA synthesis, leading to noninfectious viruses.

Role of the N-Terminal Zinc Finger of Human Immunodeficiency Virus Type 1 Nucleocapsid Protein in Virus Structure and Replication

The nucleocapsid protein NCp7 of human immunodeficiency virus type 1 (HIV-1) is a 72-amino-acid peptide containing two CCHC-type zinc fingers linked by a short basic sequence, 29RAPRKKG35, which is conserved in HIV-1 and simian immunodeficiency virus. The complete three-dimensional structure of NCp7 has been determined by 1H-nuclear magnetic resonance spectroscopy (N. Morellet, H. de Rocquigny, Y. Mely, N. Jullian, H. Demene, M. Ottmann, D. Gerard, J. L. Darlix, M. C. Fournie-Zaluski, and B. P. Roques, J. Mol. Biol. 235:287-301, 1994) and revealed a central globular domain where the two zinc fingers are brought in close proximity by the RAPRKKG linker. To examine the role of this globular structure and more precisely of the RAPRKKG linker in virion structure and infectivity, we generated HIV-1 DNA mutants in the RAPRKK sequence of NCp7 and analyzed the mutant virions produced by transfected cells. Mutations that probably alter the structure of NCp7 structure led to the formation of very poorly infectious virus (A30P) or noninfectious virus (P31L and R32G). In addition, the P31L mutant did not contain detectable amounts of reverse transcriptase and had an immature core morphology, as determined by electron microscopy. On the other hand, mutations changing the basic nature of NCp7 had poor effect. R29S had a wild-type phenotype, and the replacement of 32RKK34 by SSS (S3 mutant) resulted in a decrease by no more than 100-fold of the virus titer. These results clearly show that the RAPRKKG linker contains residues that are critical for virion structure and infectivity.

The central globular domain of the nucleocapsid protein of human immunodeficiency virus type 1 is critical for virion structure and infectivity.

Nucleocapsid protein NCp7 of human immunodeficiency virus type 1 (HIV-1) is a small basic nucleic acid binding protein containing two zinc fingers of the form (CX2CX4HX4C) and is present at about 2,000 copies inside the viral core. NCp7 molecules are tightly associated with the genomic RNA dimer to form the nucleocapsid, which also includes reverse transcriptase and integrase proteins. In vitro, NCp7 has been shown to bind specifically to HIV-1 RNA, inducing NCp7-NCp7 interactions. In the viral context, mutagenesis of amino acid residues in the zinc finger domains showed that NCp7 is responsible for the specific incorporation of genomic RNA into virions and is necessary for correct virion assembly and maturation. In this work, we investigated the consequences of mutating conserved basic residues in the N-terminal region that precedes the first zinc finger. Two of the mutants were poorly infectious and showed only limited, though significant, defects in RNA encapsidation and viral protein maturation. Electron microscopy, together with sucrose gradient analysis, revealed defects in particle core structure and heterogeneity among mutant virions. These defects were associated with strong reduction of proviral DNA synthesis and stability in newly infected cells. Taken together, these data show multiple and probably interdependent implications for the NCp7 protein in both early and late phases of the HIV-1 replicative cycle and emphasize it as a target for antiviral drug development.

Mutations in the N-terminal domain of human immunodeficiency virus type 1 nucleocapsid protein affect virion core structure and proviral DNA synthesis.

This short report based on clinical surveillance and laboratory data describes the circulation of rhinoviruses, influenza viruses and respiratory syncytial viruses (RSV) in France during the 2009-10 season compared with the previous winter season. The delayed circulation of RSV observed in 2009-10 compared with 2008-09 suggests that the early circulation of the 2009 pandemic influenza A(H1N1) viruses had an impact on the RSV epidemic.

/pdf/impact-of-the-2009-influenza-a-h1n1-pandemic-wave-on-the-29fpf9umxr.pdf

Michèle Ottmann

Papers

Rhinoviruses delayed the circulation of the pandemic influenza A (H1N1) 2009 virus in France

Role of the N-Terminal Zinc Finger of Human Immunodeficiency Virus Type 1 Nucleocapsid Protein in Virus Structure and Replication

The central globular domain of the nucleocapsid protein of human immunodeficiency virus type 1 is critical for virion structure and infectivity.

Mutations in the N-terminal domain of human immunodeficiency virus type 1 nucleocapsid protein affect virion core structure and proviral DNA synthesis.

Impact of the 2009 influenza A(H1N1) pandemic wave on the pattern of hibernal respiratory virus epidemics, France, 2009.