There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality.

Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

I and i

This document provides updates to IEEE Std 802.16's MIB for the MAC, PHY and asso- ciated management procedures in order to accommodate recent extensions to the standard.

IEEE Standard for Local and Metropolitan Area Networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems Draft Amendment: Management Information Base Extensions

Orbital angular momentum (OAM), which describes the “phase twist” (helical phase pattern) of light beams, has recently gained interest due to its potential applications in many diverse areas. Particularly promising is the use of OAM for optical communications since: (i) coaxially propagating OAM beams with different azimuthal OAM states are mutually orthogonal, (ii) inter-beam crosstalk can be minimized, and (iii) the beams can be efficiently multiplexed and demultiplexed. As a result, multiple OAM states could be used as different carriers for multiplexing and transmitting multiple data streams, thereby potentially increasing the system capacity. In this paper, we review recent progress in OAM beam generation/detection, multiplexing/demultiplexing, and its potential applications in different scenarios including free-space optical communications, fiber-optic communications, and RF communications. Technical challenges and perspectives of OAM beams are also discussed.

Optical communications using orbital angular momentum beams

Ultra Wideband Signals and Systems in Communication Engineering

In this tutorial overview, the principles, advantages, challenges, and practical requirements of optical orthogonal frequency division multiplexing (OFDM)-based optical access are presented, with an emphasis on orthogonal frequency division multiple access (OFDMA) for application in next-generation passive optical networks (PON). General OFDM principles, including orthogonality, cyclic prefix use, frequency-domain equalization, and multiuser OFDMA are summarized, followed by an overview of various optical OFDM(A) transceiver architectures for next-generation PON. Functional requirements are outlined for high-speed digital signal processors (DSP) and data converters in OFDMA-PON. A techno-economic outlook for such a “software-defined,” DSP-based optical access platform is also provided.

OFDM for Next-Generation Optical Access Networks

Next-generation optical access networks are envisioned to evolve into a converged, high-speed, multiservice platform supporting residential, business, mobile backhaul, and special purpose applications. Moreover, bandwidth demand projections suggest that terabit aggregate capacity may need to be reached in such next-generation passive optical networks (PON). To satisfy these requirements while leveraging the large investments made in existing fiber plants, a wavelength division multiplexed (WDM)-based long-reach PON architecture combined with a multiple access technology that features a passive last-mile split, large per-λ speeds, and statistical bandwidth multiplexing can be exploited. In this paper, the first terabit PON based on hybrid WDM orthogonal frequency division multiple access (OFDMA) technology is proposed and experimentally verified. To enable high-speed, long-reach transmission with simplified optical network unit (ONU)-side digital signal processing, multiband OFDMA with ONU-side sub-band selectivity is proposed. Design challenges and tradeoffs between analog and digital domain sub-band combining and selection are also discussed. Finally, the experimental setup and results of the first 1.2 Tb/s (1 Tb/s after overhead) symmetric WDM-OFDMA-PON over 90 km straight single-mode fiber and 1:32 passive split, featuring multiband OFDMA, digitally selective ONUs, and a coherent-receiver OLT are presented and analyzed. By supporting up to 800 ONUs with 1.25/10 Gb/s guaranteed/peak rates and exhibiting a record rate-distance product achieved in long-reach PON, the demonstrated architecture may be viewed as promising for future converged terabit optical metro/access.

Terabit Optical Access Networks Based on WDM-OFDMA-PON

Due to the rapid increase in network traffic in the last few years, many telecommunication operators have started transitions to 100-Gb/s optical networks and beyond. However, high-speed optical networks need more efficient forward error correction (FEC) codes to deal with optical impairments, such as uncompensated chromatic dispersion, polarization mode dispersion, and nonlinear effects, and keep the bit error rate (BER) at long distances sufficiently low. To address these issues, new FEC codes, called third-generation codes, have been proposed. A majority of these codes are based on soft-decision decoders and can provide higher coding gain as compared with their predecessors. This paper presents a thorough survey of third-generation FEC codes, suitable for 100 G and beyond optical networks. Furthermore, this paper discusses the main advantages and drawbacks of each scheme and provides a qualitative categorization and comparison of the proposed schemes based on their main features, such as net coding gain and BER. Information about the complexity of each scheme is given as well.

A Survey on FEC Codes for 100 G and Beyond Optical Networks

Providing straightforward practical guidance, this highly accessible resource presents today's most advanced topics on optical communications and networking. You get the latest details on 5th generation photonic systems that can be readily applied to your projects in the field, Moreover, the book provides valuable, time-saving tools for network simulation and modeling. You find in-depth coverage of optical signal transmission systems and networks. In addition to optical communications fundamentals with detailed description of the optical components and optical signal properties (modulation, propagation and detection), the book includes coverage of a wide range of critical methods and techniques, such as MIMO (multiple-input and multiple-output) by employing spatial modes in few-mode and multicore optical fibers, OFDM (orthogonal frequency-division multiplexing) utilized to enhance the spectral efficiency and to enable elastic optical networking schemes, and advanced modulation and coding schemes to approach the Shannon's channel capacity limit. You find detailed discussions on the basic principles and applications of high-speed digital signal processing. The book also describes the most relevant post-detection compensation techniques, including linear equalizers, adaptive equalizers, maximum-likelihood sequence detectors, blind equalizers, turbo equalizers, digital back-propagation, Wiener filtering, and Volterra series based equalization. Other key topics include advanced concepts on coded-modulation, LDPC-coded turbo equalization, polarization-time coding, spatial-domain-based modulation and coding, and multidimensional signaling. This comprehensive book includes a complete set of problems at the end of each chapter to help you master the material. Supplementary Materials: A solutions manual is available and reserved for instructors only. To request a copy of the Solutions Manual, please fax your request on your departmental letterhead to Chris Stanfa at 781-769-6334.

Advanced Optical Communication Systems and Networks

We propose the coded modulation schemes for ultrahigh-speed transmission (100 Gb/s and above) by using commercially available components operating at 40 gigasymbols/s. The bit-interleaved coded modulation in combination with the low-density parity-check codes that are used as component codes has been applied. The modulation is based on either M-ary quadrature-amplitude modulation or M-ary phase-shift keying. bits are mapped into the corresponding signal constellation point using either Gray or natural mapping. The coherent detection scheme has been found to outperform the direct detection one and to provide an additional margin much needed for longer transmission distances or for application in an all-optical network scenario.

/pdf/using-ldpc-coded-modulation-and-coherent-detection-for-ultra-4bqy61jj94.pdf

Milorad Cvijetic

Papers

Terabit Optical Access Networks Based on WDM-OFDMA-PON

A Survey on FEC Codes for 100 G and Beyond Optical Networks

Advanced Optical Communication Systems and Networks

Using LDPC-Coded Modulation and Coherent Detection for Ultra Highspeed Optical Transmission

Experimental Demonstration of a Novel OFDM-A Based 10Gb/s PON Architecture