A review was presented to demonstrate a historical description of the synthesis of light-emitting conjugated polymers for applications in electroluminescent devices. Electroluminescence (EL) was first reported in poly(para-phenylene vinylene) (PPV) in 1990 and researchers continued to make significant efforts to develop conjugated materials as the active units in light-emitting devices (LED) to be used in display applications. Conjugated oligomers were used as luminescent materials and as models for conjugated polymers in the review. Oligomers were used to demonstrate a structure and property relationship to determine a key polymer property or to demonstrate a technique that was to be applied to polymers. The review focused on demonstrating the way polymer structures were made and the way their properties were controlled by intelligent and rational and synthetic design.

Synthesis of Light-Emitting Conjugated Polymers for Applications in Electroluminescent Devices

The chemistry of copper is extremely rich because it can easily access Cu0, CuI, CuII, and CuIII oxidation states allowing it to act through one-electron or two-electron processes. As a result, both radical pathways and powerful two-electron bond forming pathways via organmetallic intermediates, similar to those of palladium, can occur. In addition, the different oxidation states of copper associate well with a large number of different functional groups via Lewis acid interactions or π-coordination. In total, these feature confer a remarkably broad range of activities allowing copper to catalyze the oxidation and oxidative union of many substrates.

Oxygen is a highly atom economical, environmentally benign, and abundant oxidant, which makes it ideal in many ways.1 The high activation energies in the reactions of oxygen require that catalysts be employed.2 In combination with molecular oxygen, the chemistry of copper catalysis increases exponentially since oxygen can act as either a sink for electrons (oxidase activity) and/or as a source of oxygen atoms that are incorporated into the product (oxygenase activity). The oxidation of copper with oxygen is a facile process allowing catalytic turnover in net oxidative processes and ready access to the higher CuIII oxidation state, which enables a range of powerful transformations including two-electron reductive elimination to CuI. Molecular oxygen is also not hampered by toxic byproducts, being either reduced to water, occasionally via H2O2 (oxidase activity) or incorporated into the target structure with high atom economy (oxygenase activity). Such oxidations using oxygen or air (21% oxygen) have been employed safely in numerous commodity chemical continuous and batch processes.3

However, batch reactors employing volatile hydrocarbon solvents require that oxygen concentrations be kept low in the head space (typically <5–11%) to avoid flammable mixtures, which can limit the oxygen concentration in the reaction mixture.4,5,6 A number of alternate approaches have been developed allowing oxidation chemistry to be used safely across a broader array of conditions. For example, use of carbon dioxide instead of nitrogen as a diluent leads to reduced flammability.5 Alternately, water can be added to moderate the flammability allowing even pure oxygen to be employed.6 New reactor designs also allow pure oxygen to be used instead of diluted oxygen by maintaining gas bubbles in the solvent, which greatly improves reaction rates and prevents the build up of higher concentrations of oxygen in the head space.4a,7 Supercritical carbon dioxide has been found to be advantageous as a solvent due its chemical inertness towards oxidizing agents and its complete miscibility with oxygen or air over a wide range of temperatures.8 An number of flow technologies9 including flow reactors,10 capillary flow reactors,11 microchannel/microstructure structure reactors,12 and membrane reactors13 limit the amount of or afford separation of hydrocarbon/oxygen vapor phase thereby reducing the potential for explosions.

Enzymatic oxidizing systems based upon copper that exploit the many advantages and unique aspects of copper as a catalyst and oxygen as an oxidant as described in the preceding paragraphs are well known. They represent a powerful set of catalysts able to direct beautiful redox chemistry in a highly site-selective and stereoselective manner on simple as well as highly functionalized molecules. This ability has inspired organic chemists to discover small molecule catalysts that can emulate such processes. In addition, copper has been recognized as a powerful catalyst in several industrial processes (e.g. phenol polymerization, Glaser-Hay alkyne coupling) stimulating the study of the fundamental reaction steps and the organometallic copper intermediates. These studies have inspiried the development of nonenzymatic copper catalysts. For these reasons, the study of copper catalysis using molecular oxygen has undergone explosive growth, from 30 citations per year in the 1980s to over 300 citations per year in the 2000s.

A number of elegant reviews on the subject of catalytic copper oxidation chemistry have appeared. Most recently, reviews provide selected coverage of copper catalysts14 or a discussion of their use in the aerobic functionalization of C–H bonds.15 Other recent reviews cover copper and other metal catalysts with a range of oxidants, including oxygen, but several reaction types are not covered.16 Several other works provide a valuable overview of earlier efforts in the field.17 This review comprehensively covers copper catalyzed oxidation chemistry using oxygen as the oxidant up through 2011. Stoichiometric reactions with copper are discussed, as necessary, to put the development of the catalytic processes in context. Mixed metal systems utilizing copper, such as palladium catalyzed Wacker processes, are not included here. Decomposition reactions involving copper/oxygen and model systems of copper enzymes are not discussed exhaustively. To facilitate analysis of the reactions under discussion, the current mechanistic hypothesis is provided for each reaction. As our understanding of the basic chemical steps involving copper improve, it is expected that many of these mechanisms will evolve accordingly.

/pdf/aerobic-copper-catalyzed-organic-reactions-3ctljpvivz.pdf

Aerobic Copper-Catalyzed Organic Reactions

On the basis of different types of experiments, the authors develop implicitly the model of surface-enhanced Raman scattering (SERS) of adsorbates on metal surfaces. The long-range enhancement by resonances of the macroscopic laser and Stokes field is separated quantitatively from the metal electron-mediated resonance Raman effect. The latter mechanism proceeds by increased electron-photon coupling at an atomically rough surface and by temporary charge transfer to orbitals of the adsorbates. This model can account for the chemical specificity and vibrational selectivity of SERS and (partly) for the SERS specificity of the various metals.

https://iopscience.iop.org/article/10.1088/0953-8984/4/5/001/pdf

Surface-enhanced Raman scattering

Nickel-Catalyzed Cross-Couplings Involving Carbon-Oxygen Bonds Brad M. Rosen, Kyle W. Quasdorf, Daniella A. Wilson, Na Zhang, Ana-Maria Resmerita, Neil K. Garg,* and Virgil Percec* Roy & Diana Vagelos Laboratories, Department of Chemistry, University of Pennsylvania, Philadelphia, Pennsylvania 19104-6323, United States Department of Chemistry and Biochemistry, University of California, Los Angeles, California 90095, United States

/pdf/nickel-catalyzed-cross-couplings-involving-carbon-oxygen-1zs88el3fl.pdf

Nickel-Catalyzed Cross-Couplings Involving Carbon-Oxygen Bonds

Hyperbranched polymers: a promising new class of materials

We investigated a head-to-tail regioregularity of poly(3-alkylthiophenes) from 3-alkylthiophene by an oxidative coupling polymerization, which is the simplest and easiest way for the synthesis of polythiophenes. The polymerizations were conducted using ferric chloride (III) as an oxidant in chloroform. Investigating the polymerization conditions, a lower temperature and a lower concentration were effective for increasing the head-to-tail (HT) content. The best HT content of 88% was obtained when the temperature was -45°C and the initial monomer concentration was 0.02 mol L -1 . Washing the resulting polymer by n-hexane further increased the content to 91%. Thus, it was found that the high regioselectivity can be achieved by the simple polymerization and the simple operation such as washing. The polymerization mechanism causing the regularity is also discussed.

Head‐to‐tail regioregularity of poly(3‐hexylthiophene) in oxidative coupling polymerization with FeCl3

A negative working photosensitive polyimide based on poly(hydroxyimide) (PHI), 2,6-bis(hydroxymethyl)-4-methylphenol (BHMP) as cross-linker, and photoacid generator diphenyliodonium 9,10-dimethoxya...

A New Negative-Type Photosensitive Polyimide Based on Poly(hydroxyimide), a Cross-Linker, and a Photoacid Generator

A negative-working photoresist based on calix[4]resorcinarene (C-4-RA), 4,4‘-methylenebis[2,6-bis(hydroxymethyl)phenol] (MBHP) as a cross-linker, and a photoacid generator diphenyliodonium 9,10-dimethoxyanthracene-2-sulfonate (DIAS) has been developed. A clear transparent film was obtained from a 25 wt % C-4-RA solution in 2-methoxyethanol. The photoresist consisting of C-4-RA (65 wt %), MBHP (25 wt %), and DIAS (10 wt %) showed a sensitivity of 4.3 mJ/cm2 and a contrast of 2.9 when it was exposed to 365 nm light and postbaked at 120 °C for 3 min, followed by developing with a 0.1% aqueous tetramethylammonium hydroxide solution at room temperature. The mechanistic study on the formation of images is also discussed.

Three-Component Negative-Type Photoresist Based on Calix[4]resorcinarene, a Cross-linker, and a Photoacid Generator

Aliphatic polyimides containing adamantyl units (APIs) were prepared by the poly(addition/condensation) of a dianhydride bicyclo[2.2.2]octane-2,3,5,6-tetracarboxylic 2,3 : 5,6-dianhydride with a rigid diamine, 1,3-diaminoadamantane or 3,3′-diamino-1,1′-biadamantyl, and a flexible diamine, 4,4′-methylenebis(cyclohexylamine) or 1,4-cyclohexanediamine. One-step polymerizations were conducted at 80–200°C in m-cresol, producing APIs with inherent viscosities up to 0.53 dL g−1. These APIs are soluble in haloalkanes, m-cresol, and sulfuric acid and show high thermal stability and excellent transparency. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3584–3590, 1999

Synthesis of aliphatic polyimides containing adamantyl units

Synthese par reaction des acides p-toluene- et benzene-sulfoniques avec des arenes dans l'acide polyphosphorique

Mitsuru Ueda

Papers

Head‐to‐tail regioregularity of poly(3‐hexylthiophene) in oxidative coupling polymerization with FeCl3

A New Negative-Type Photosensitive Polyimide Based on Poly(hydroxyimide), a Cross-Linker, and a Photoacid Generator

Three-Component Negative-Type Photoresist Based on Calix[4]resorcinarene, a Cross-linker, and a Photoacid Generator

Synthesis of aliphatic polyimides containing adamantyl units

A new synthesis of diaryl sulfones