https://dc.engconfintl.org/cgi/viewcontent.cgi?article=1032&context=superalloys_ii

A critical review of high entropy alloys and related concepts

A review of conduction phenomena in Li-ion batteries

Reduction Reaction in Polymer Electrolyte Membrane Fuel Cells: Particle Size, Shape, and Composition Manipulation and Their Impact to Activity Yan-Jie Wang,†,‡ Nana Zhao,‡ Baizeng Fang,† Hui Li,* Xiaotao T. Bi,*,† and Haijiang Wang* †Department of Chemical and Biological Engineering, University of British Columbia, 2360 East Mall, Vancouver, BC Canada V6T 1Z3 ‡Vancouver International Clean-Tech Research Institute Inc., 4475 Wayburne Drive, Burnaby, Canada V5G 4X4 Electrochemical Materials, Energy, Mining and Environment, National Research Council Canada, 4250 Wesbrook Mall, Vancouver, BC, Canada V6T 1W5

/pdf/carbon-supported-pt-based-alloy-electrocatalysts-for-the-2c1brn5o9r.pdf

Carbon-Supported Pt-Based Alloy Electrocatalysts for the Oxygen Reduction Reaction in Polymer Electrolyte Membrane Fuel Cells: Particle Size, Shape, and Composition Manipulation and Their Impact to Activity

Designer platinum nanoparticles: Control of shape, composition in alloy, nanostructure and electrocatalytic property

In situ degradation of metal-alloy implants is undesirable for two reasons: the degradation process may decrease the structural integrity of the implant, and the release of degradation products may elicit an adverse biological reaction in the host Degradation may result from electrochemical dissolution phenomena, wear, or a synergistic combination of the two Electrochemical processes may include generalized corrosion, uniformly affecting the entire surface of the implant, and localized corrosion, affecting either regions of the device that are shielded from the tissue fluids (crevice corrosion) or seemingly random sites on the surface (pitting corrosion) Electrochemical and mechanical processes (for example, stress corrosion cracking, corrosion fatigue, and fretting corrosion) may interact, causing premature structural failure and accelerated release of metal particles and ions

The clinical importance of degradation of metal implants is evidenced by particulate corrosion and wear products in tissue surrounding the implant, which may ultimately result in a cascade of events leading to periprosthetic bone loss Furthermore, many authors have reported increased concentrations of local and systemic trace metal in association with metal implants1,4,5,9-11,14,18,25,26,28,29,47,49-55,58,71,72,75-77,87,90,108-110 There also is a low but finite prevalence of corrosion-related fracture of the implant

This review focuses on electrochemical corrosion phenomena in alloys used for orthopaedic implants A summary of basic electrochemistry is followed by a discussion of retrieval studies of the response of the implant to the host environment and the response of local tissue to implant corrosion products The systemic implications of the release of metal particles also are presented Finally, future directions in biomaterials research and development …

/pdf/corrosion-of-metal-orthopaedic-implants-2h3sv09cdv.pdf

Corrosion of metal orthopaedic implants.

Thermodynamics and Phase Diagrams Equilibrium Single-Component Systems Binary Solutions Equilibrium in Heterogeneous Systems Binary Phase Diagrams Influence of Interfaces on Equilibrium Ternary Equilibrium Additional Thermodynamic Relationships for Binary Solutions Computation of Phase Diagrams Kinetics of Phase Transformations Exercises References Further Readings Diffusion Atomic Mechanisms of Diffusion Interstitial Diffusion Substitutional Diffusion Atomic Mobility Tracer Diffusion in Binary Alloys Diffusion in Ternary Alloys High-Diffusivity Paths Diffusion in Multiphase Binary Systems Exercises References Further Readings Crystal Interfaces and Microstructure Interfacial Free Energy Solid=Vapor Interfaces Boundaries in Single-Phase Solids Interphase Interfaces in Solids Interface Migration Exercises References Further Readings Solidification Nucleation in Pure Metals Growth of a Pure Solid Alloy Solidification Solidification of Ingots and Castings Solidification of Fusion Welds Solidification during Quenching from the Melt Metallic Glasses Case Studies of Some Practical Castings and Welds Exercises References Further Readings Diffusional Transformations in Solids Homogeneous Nucleation in Solids Heterogeneous Nucleation Precipitate Growth5 Overall Transformation Kinetics-TTT Diagrams Precipitation in Age-Hardening Alloys Precipitation of Ferrite from Austenite Cellular Precipitation Eutectoid Transformations Massive Transformations Ordering Transformations Case Studies Exercises References Further Readings Diffusionless Transformations Characteristics of Diffusionless Transformations Martensite Crystallography Theories of Martensite Nucleation Martensite Growth1 Premartensite Phenomena Tempering of Ferrous Martensites Case Studies Exercises References Further Readings Solutions to Exercises Compiled by John C. Ion

/pdf/phase-transformations-in-metals-and-alloys-3qucrz9924.pdf

Mohamed Y. Sherif

Papers

Phase transformations in metals and alloys

Diffusional Transformations in Solids