The detrimental effects of water in asphalt mixtures and its manifestation as distresses in asphalt pavements were first recognised in the 1930s and have been studied extensively during the last 35 years. This deterioration process, referred to as moisture damage, is generally defined as the degradation of the mechanical properties of the material due to the presence of moisture in its microstructure. Moisture damage is a complex phenomenon that involves thermodynamic, chemical, physical and mechanical processes. This paper describes the processes by which moisture damage affects asphalt mixtures. A critique of various moisture damage mechanisms is presented, followed by a review of recent work on modes of moisture transport (i.e. water permeability, capillary rise and vapour diffusion) and their relationship to moisture damage. Special attention is given to the characterisation of void structures of asphalt mixtures, which is an important factor that influences moisture transport. Finally, the paper pres...

Moisture susceptibility of asphalt mixtures, Part 1: mechanisms

This study describes experimental and analytical methods to quantify the structure of air voids in asphalt mixes. An x-ray computed tomography system along with image analysis techniques were used to measure air void sizes at different depths within asphalt mix specimens. The statistical analyses performed validated the applicability of the Weibull model for describing the air void distribution. Consequently, the Weibull model was used to quantify the effect of the compaction effort, method of compaction, and aggregate size distribution on air voids. The air void size distribution in Superpave gyratory compacted specimens was found to exhibit a “bathtub” shape, whereby larger voids were present at the top and bottom parts of a specimen. This shape was more pronounced at higher compaction efforts. The method of compaction was significant in influencing the air void size distribution. Specimens prepared using the Superpave gyratory compactor with different aggregate sizes were found to have noticeably diffe...

Characterization of air void distribution in asphalt mixes using x-ray computed tomography

3D meso-scale fracture modelling and validation of concrete based on in-situ X-ray Computed Tomography images using damage plasticity model

This study presents micromechanical finite-element (FE) and discrete-element (DE) models for the prediction of viscoelastic creep stiffness of asphalt mixture. Asphalt mixture is composed of graded aggregates bound with mastic (asphalt mixed with fines and fine aggregates) and air voids. The two-dimensional (2D) microstructure of asphalt mixture was obtained by optically scanning the smoothly sawn surface of superpave gyratory compacted asphalt mixture specimens. For the FE method, the micromechanical model of asphalt mixture uses an equivalent lattice network structure whereby interparticle load transfer is simulated through an effective asphalt mastic zone. The ABAQUS FE model integrates a user material subroutine that combines continuum elements with viscoelastic properties for the effective asphalt mastic and rigid body elements for each aggregate. An incremental FE algorithm was employed in an ABAQUS user material model for the asphalt mastic to predict global viscoelastic behavior of asphalt mixture. In regard to the DE model, the outlines of aggregates were converted into polygons based on a 2D scanned mixture microstructure. The polygons were then mapped onto a sheet of uniformly sized disks, and the intrinsic and interface properties of the aggregates and mastic were assigned for the simulation. An experimental program was developed to measure the properties of sand mastic for simulation inputs. The laboratory measurements of the mixture creep stiffness were compared with FE and DE model predictions over a reduced time. The results indicated both methods were applicable for mixture creep stiffness prediction.

Prediction of Creep Stiffness of Asphalt Mixture with Micromechanical Finite-Element and Discrete-Element Models

Representation of real particles for DEM simulation using X-ray tomography

The performance of asphalt concrete (AC) mixtures is influenced by the arrangement of aggregates and their associated air voids. Parameters to measure aggregate orientation, aggregate gradation, and air void distribution in AC mixes are proposed. Computer automated image analysis procedures were used to measure these parameters. The air void distribution was characterized using X-ray tomography images. The new parameters were used to study the evolution of the internal structure of AC mixes during laboratory compaction by the Superpave Gyratory Compactor and in the field. The preferred orientation of the aggregate structure in the laboratory was found to increase with compaction up to a certain compaction effort. Thereafter, the aggregate structure tended to have more random orientation. Percent voids measured on X-ray tomography images compared well with percent voids measured in the laboratory. The void distribution in the specimens was found to be nonuniform. More internal voids were concentrated at the top and the bottom portions of the gyratory compacted specimen. The gyratory compacted specimens reached the initial aggregate orientation of the field cores at a higher number of gyrations whereas they reached the percent air voids in cores at a lower number of gyrations. Coarse aggregate gradation of gyratory compacted specimens was well captured using the image analysis techniques. There was no change in gradation with compaction.

N. Shashidhar

Papers

Internal Structure Characterization of Asphalt Concrete Using Image Analysis

Characterization of air void distribution in asphalt mixes using x-ray computed tomography