A comprehensive review is presented of the extractive metallurgy of rare earths. The topics covered are: world rare earth resources and production; ore processing and separation of individual rare earths; reduction, refining, and ultrapurification of rare earth elements; methods for rare earth materials analysis; and a selection of the numerous rare earth applications. World rare earth reserves are abundant and would last for well beyond the next century. However, all of the 16 naturally occurring rare earth elements are not equally distributed in the ore minerals. This, compounded with the problems specific to the isolation and recovery of each of the rare earths, sets the stage for an unequal rare earth availability. The close chemical similarity of rare earths looses its importance when divergent physical properties determine the processes for rare earth element reduction and refining. The rare earth metals, alloys, and compounds have been as pure as could be determined. Finally, the commercial...

Extractive Metallurgy of Rare Earths

A review on the current progress of metal hydrides material for solid-state hydrogen storage applications

We demonstrate over 1×1010 open-loop switching cycles from a simple memristive device stack of Pt/TaOx/Ta. We compare this system to a similar device stack based on titanium oxides to obtain insight into the solid-state thermodynamic and kinetic factors that influence endurance in metal-oxide memristors.

/pdf/high-switching-endurance-in-taox-memristive-devices-4j99xe3m1n.pdf

High switching endurance in TaOx memristive devices

Boron carbide is a strategic material, finding applications in nuclear industry, armour for personnel and vehicle safety, rocket propellant, etc. Its high hardness makes it suitable for grinding and cutting tools, ceramic bearing, wire drawing dies, etc. Boron carbide is commercially produced either by carbothermic reduction of boric acid in electric furnaces or by magnesiothermy in presence of carbon. Since many specialty applications of boron carbide require dense bodies, its densification is of great importance. Hot pressing and hot isostatic pressing are the main processes employed for densification. In the recent past, various researchers have made attempts to improve the existing methods and also invent new processes for synthesis and consolidation of boron carbide. All the techniques on synthesis and consolidation of boron carbide are discussed in detail and critically reviewed.

Synthesis and consolidation of boron carbide: a review

Hydrogen storage systems (HSSs), are the backbone of feasible hydrogen economy. To provide a reliable renewable energy system, safe, cost effective and compact HSS is due. Physical storage systems involve the compressed gas, liquid and cryo-compressed techniques while material based one involves adsorptive materials, metal hydrides and chemical storage materials. In this paper, the features of a variety of HSSs are impartially discussed. The technical comparative analysis of the different physical and material based types of HSSs illustrates the paradoxical inherent features, including gravimetric and volumetric storage densities and parameters associated with storage and release processes, among these systems. Accordingly, no ideal hydrogen storage technique can be considered the best-fit for all stationary and automotive applications. Therefore, not only a unique HSS solution can properly provide the needs, but a set of complementary HSS solutions which may offer the system designer several options. This set of options can be hardly interpretable in case of the unclear definition of the application needs which may be time variant. Inside this review, the critical insights and recommendations about suitable applications for storage systems are provided. Different standards and codes alongside the corresponding tests are demonstrated for the different storage technologies. Moreover, storage vessels research work is overviewed for the different hydrogen storage technologies. In addition, the failure behaviour, criteria and prediction models are investigated for composite vessels subjected to high pressures and extreme temperatures degrading their mechanical behaviour and failure resistance.

Hydrogen storage technologies for stationary and mobile applications: Review, analysis and perspectives

The O-Ta (Oxygen-Tantalum) system

High performance FeTi – 3.1 mass % V alloy for on board hydrogen storage solution

Hydrogen absorption kinetics of V4Cr4Ti alloy prepared by aluminothermy

Variation of activation energy of hydrogen absorption of vanadium as a function of aluminum

Titanium diboride (TiB 2 ) composite with MoSi 2 and CrB 2 has been prepared and tested to possess excellent oxidation resistance. Dense composite pellets were fabricated by hot pressing of powder mixtures. Microstructural characterization was carried out by XRD and SEM. Hardness and fracture toughness values were measured. Extensive oxidation studies of the composites were also carried out. Density of ≥ 96% ρ th was obtained by hot pressing at 1800 °C under a pressure of 35 MPa for 1 h. Hardness and fracture toughness were in the range of 18–24 GPa and 3.5–4 MPa·m 1/2 respectively. Crack branching, deflection and bridging mechanisms were observed in the crack propagation paths. Isothermal and continuous oxidation studies of these composites up to 1000 °C showed improved oxidation resistance with the formation of protective glassy layer. TiO 2 , Cr 2 O 3 and SiO 2 phases were identified on the oxidized surface. Diffusion controlled mechanism of oxidation was observed in the composites.

Nagaiyar Krishnamurthy

Papers

The O-Ta (Oxygen-Tantalum) system

High performance FeTi – 3.1 mass % V alloy for on board hydrogen storage solution

Hydrogen absorption kinetics of V4Cr4Ti alloy prepared by aluminothermy

Variation of activation energy of hydrogen absorption of vanadium as a function of aluminum

Densification and oxidation behavior of a novel TiB2–MoSi2–CrB2 composite