This paper reviews the state-of-the art in vibration energy harvesting for wireless, self-powered microsystems. Vibration-powered generators are typically, although not exclusively, inertial spring and mass systems. The characteristic equations for inertial-based generators are presented, along with the specific damping equations that relate to the three main transduction mechanisms employed to extract energy from the system. These transduction mechanisms are: piezoelectric, electromagnetic and electrostatic. Piezoelectric generators employ active materials that generate a charge when mechanically stressed. A comprehensive review of existing piezoelectric generators is presented, including impact coupled, resonant and human-based devices. Electromagnetic generators employ electromagnetic induction arising from the relative motion between a magnetic flux gradient and a conductor. Electromagnetic generators presented in the literature are reviewed including large scale discrete devices and wafer-scale integrated versions. Electrostatic generators utilize the relative movement between electrically isolated charged capacitor plates to generate energy. The work done against the electrostatic force between the plates provides the harvested energy. Electrostatic-based generators are reviewed under the classifications of in-plane overlap varying, in-plane gap closing and out-of-plane gap closing; the Coulomb force parametric generator and electret-based generators are also covered. The coupling factor of each transduction mechanism is discussed and all the devices presented in the literature are summarized in tables classified by transduction type; conclusions are drawn as to the suitability of the various techniques.

/pdf/energy-harvesting-vibration-sources-for-microsystems-46t885pwdp.pdf

Energy harvesting vibration sources for microsystems applications

The field of power harvesting has experienced significant growth over the past few years due to the ever-increasing desire to produce portable and wireless electronics with extended lifespans. Current portable and wireless devices must be designed to include electrochemical batteries as the power source. The use of batteries can be troublesome due to their limited lifespan, thus necessitating their periodic replacement. In the case of wireless sensors that are to be placed in remote locations, the sensor must be easily accessible or of a disposable nature to allow the device to function over extended periods of time. Energy scavenging devices are designed to capture the ambient energy surrounding the electronics and convert it into usable electrical energy. The concept of power harvesting works towards developing self-powered devices that do not require replaceable power supplies. A number of sources of harvestable ambient energy exist, including waste heat, vibration, electromagnetic waves, wind, flowing water, and solar energy. While each of these sources of energy can be effectively used to power remote sensors, the structural and biological communities have placed an emphasis on scavenging vibrational energy with piezoelectric materials. This article will review recent literature in the field of power harvesting and present the current state of power harvesting in its drive to create completely self-powered devices.

/pdf/a-review-of-power-harvesting-using-piezoelectric-materials-k69swwfj1u.pdf

A review of power harvesting using piezoelectric materials (2003–2006)

Energy harvesting generators are attractive as inexhaustible replacements for batteries in low-power wireless electronic devices and have received increasing research interest in recent years. Ambient motion is one of the main sources of energy for harvesting, and a wide range of motion-powered energy harvesters have been proposed or demonstrated, particularly at the microscale. This paper reviews the principles and state-of-art in motion-driven miniature energy harvesters and discusses trends, suitable applications, and possible future developments.

/pdf/energy-harvesting-from-human-and-machine-motion-for-wireless-3lsf4oudvo.pdf

Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices

Dynamics of structures

In recent years, there has been an increasing interest in the adoption of emerging sensing technologies for instrumentation within a variety of structural systems. Wireless sensors and sensor networks are emerging as sensing paradigms that the structural engineering field has begun to consider as substitutes for traditional tethered monitoring systems. A benefit of wireless structural monitoring systems is that they are inexpensive to install because extensive wiring is no longer required between sensors and the data acquisition system. Researchers are discovering that wireless sensors are an exciting technology that should not be viewed as simply a substitute for traditional tethered monitoring systems. Rather, wireless sensors can play greater roles in the processing of structural response data; this feature can be utilized to screen data for signs of structural damage. Also, wireless sensors have limitations that require novel system architectures and modes of operation. This paper is intended to serve as a summary review of the collective experience the structural engineering community has gained from the use of wireless sensors and sensor networks for monitoring structural performance and health.

http://www-personal.umich.edu/~jerlynch/papers/SVDReview.pdf

A summary review of wireless sensors and sensor networks for structural health monitoring

In the present work we explore some aspects of energy harvesting from unsteady, turbulent fluid flow using piezoelectric generators. Turbulent flows exhibit a large degree of coherence in their spatial and temporal scales, which provides a unique opportunity for energy harvesting. The voltage generated by short, flexible piezoelectric cantilever beams placed inside turbulent boundary layers and wakes of circular cylinders at high Reynolds numbers is investigated. Matching the fluid flow's predominant frequency with the natural frequency of the piezoelectric generator appears to maximize the piezoelectric output voltage. This voltage is also dependent on the generator's location inside the flow field. A three-way coupled interaction simulation that takes into account the aerodynamics, structural vibration, and electrical response of the piezoelectric generator has been developed. The simulation results agree reasonably well with the experimental data paving the way of using such a tool to estimate the performance of different energy harvesting devices within unsteady flow fields.

Energy Harvesting from Highly Unsteady Fluid Flows using Piezoelectric Materials

Advances in energy harvesting methods

The available power in a flowing fluid is proportional to the cube of its velocity, and this feature indicates the potential for generating substantial electrical energy by exploiting the direct piezoelectric effect. The present work is an experimental investigation of a self-excited piezoelectric energy harvester subjected to a uniform and steady flow. The harvester consists of a cylinder attached to the free end of a cantilevered beam, which is partially covered by piezoelectric patches. Due to fluid?structure interaction phenomena, the cylinder is subjected to oscillatory forces, and the beam is deflected accordingly, causing the piezoelectric elements to strain and thus develop electric charge. The harvester was tested in a wind tunnel and it produced approximately 0.1?mW of non-rectified electrical power at a flow speed of 1.192?m?s?1. The aeroelectromechanical efficiency at resonance was calculated to be 0.72%, while the power per device volume was 23.6?mW?m?3 and the power per piezoelectric volume was 233?W?m?3. Strain measurements were obtained during the tests and were used to predict the voltage output by employing a distributed parameter model. The effect of non-rigid bonding on strain transfer was also investigated. While the rigid bonding assumption caused a significant (>60%) overestimation of the measured power, a non-rigid bonding model gave a better agreement (<10% error).

https://iopscience.iop.org/article/10.1088/0964-1726/21/2/025007/pdf

The performance of a self-excited fluidic energy harvester

With the growing use of sensors in various structural and mechanical systems, the powering and communication of these sensors will become a critical factor. Wireless communication electronics are becoming ubiquitous and with the decreasing electrical power requirements for these circuits it is now feasible to generate power from the conversion of mechanical energy into electrical energy. This paper focuses on the theoretical and experimental analysis of a simple mechanical strain energy sensor with wireless communication. A simple beam bending experiment is given to illustrate some of the characteristics of the self-powered strain energy sensor.

https://iopscience.iop.org/article/10.1088/0964-1726/10/2/314/pdf

A self-powered mechanical strain energy sensor

Short-length piezoelectric beams were placed in the wake of a circular cylinder at high Reynolds numbers to evaluate their performance as energy generators. The coherent vortical structures present in this flow generate a periodic forcing on the beam which when tuned to its resonant frequency produces maximum output voltage. There are two mechanisms that contribute to the driving forcing of the beam. The first mechanism is the impingement of induced flow by the passing vortices on one side of the beam, and the second is the low pressure core region of the vortices which is present at the opposite side of the beam. The sequence of these two mechanisms combined with the resonating conditions of the beam generated maximum energy output which was also found to vary with the location in the wake. The maximum power output was measured when the tip of the beam is about two diameters downstream of the cylinder. This power drops off the center line of the wake and decays with downstream distance as (x/D)−3/2.

Niell Elvin

Papers

Energy Harvesting from Highly Unsteady Fluid Flows using Piezoelectric Materials

Advances in energy harvesting methods

The performance of a self-excited fluidic energy harvester

A self-powered mechanical strain energy sensor

Wake of a cylinder: a paradigm for energy harvesting with piezoelectric materials