This review focuses on the synthesis, protection, functionalization, and application of magnetic nanoparticles, as well as the magnetic properties of nanostructured systems. Substantial progress in the size and shape control of magnetic nanoparticles has been made by developing methods such as co-precipitation, thermal decomposition and/or reduction, micelle synthesis, and hydrothermal synthesis. A major challenge still is protection against corrosion, and therefore suitable protection strategies will be emphasized, for example, surfactant/polymer coating, silica coating and carbon coating of magnetic nanoparticles or embedding them in a matrix/support. Properly protected magnetic nanoparticles can be used as building blocks for the fabrication of various functional systems, and their application in catalysis and biotechnology will be briefly reviewed. Finally, some future trends and perspectives in these research areas will be outlined.

Magnetic nanoparticles: Synthesis, protection, functionalization, and application

1. Introduction 20642. Synthesis of Magnetic Nanoparticles 20662.1. Classical Synthesis by Coprecipitation 20662.2. Reactions in Constrained Environments 20682.3. Hydrothermal and High-TemperatureReactions20692.4. Sol-Gel Reactions 20702.5. Polyol Methods 20712.6. Flow Injection Syntheses 20712.7. Electrochemical Methods 20712.8. Aerosol/Vapor Methods 20712.9. Sonolysis 20723. Stabilization of Magnetic Particles 20723.1. Monomeric Stabilizers 20723.1.1. Carboxylates 20733.1.2. Phosphates 20733.2. Inorganic Materials 20733.2.1. Silica 20733.2.2. Gold 20743.3. Polymer Stabilizers 20743.3.1. Dextran 20743.3.2. Polyethylene Glycol (PEG) 20753.3.3. Polyvinyl Alcohol (PVA) 20753.3.4. Alginate 20753.3.5. Chitosan 20753.3.6. Other Polymers 20753.4. Other Strategies for Stabilization 20764. Methods of Vectorization of the Particles 20765. Structural and Physicochemical Characterization 20785.1. Size, Polydispersity, Shape, and SurfaceCharacterization20795.2. Structure of Ferro- or FerrimagneticNanoparticles20805.2.1. Ferro- and Ferrimagnetic Nanoparticles 20805.3. Use of Nanoparticles as Contrast Agents forMRI20825.3.1. High Anisotropy Model 20845.3.2. Small Crystal and Low Anisotropy EnergyLimit20855.3.3. Practical Interests of Magnetic NuclearRelaxation for the Characterization ofSuperparamagnetic Colloid20855.3.4. Relaxation of Agglomerated Systems 20856. Applications 20866.1. MRI: Cellular Labeling, Molecular Imaging(Inﬂammation, Apoptose, etc.)20866.2.

Magnetic Iron Oxide Nanoparticles: Synthesis, Stabilization, Vectorization, Physicochemical Characterizations, and Biological Applications

We investigate Raman spectra of graphite oxide and functionalized graphene sheets with epoxy and hydroxyl groups and Stone−Wales and 5−8−5 defects by first-principles calculations to interpret our experimental results. Only the alternating pattern of single−double carbon bonds within the sp2 carbon ribbons provides a satisfactory explanation for the experimentally observed blue shift of the G band of the Raman spectra relative to graphite. To obtain these single−double bonds, it is necessary to have sp3 carbons on the edges of a zigzag carbon ribbon.

Raman Spectra of Graphite Oxide and Functionalized Graphene Sheets

Nanocrystals (NCs) discussed in this Review are tiny crystals of metals, semiconductors, and magnetic material consisting of hundreds to a few thousand atoms each. Their size ranges from 2-3 to about 20 nm. What is special about this size regime that placed NCs among the hottest research topics of the last decades? The quantum mechanical coupling * To whom correspondence should be addressed. E-mail: dvtalapin@uchicago.edu. † The University of Chicago. ‡ Argonne National Lab. Chem. Rev. 2010, 110, 389–458 389

/pdf/prospects-of-colloidal-nanocrystals-for-electronic-and-3dxpyhl3r7.pdf

Prospects of Colloidal Nanocrystals for Electronic and Optoelectronic Applications

A process is described to produce single sheets of functionalized graphene through thermal exfoliation of graphite oxide. The process yields a wrinkled sheet structure resulting from reaction sites involved in oxidation and reduction processes. The topological features of single sheets, as measured by atomic force microscopy, closely match predictions of first-principles atomistic modeling. Although graphite oxide is an insulator, functionalized graphene produced by this method is electrically conducting.

/pdf/functionalized-single-graphene-sheets-derived-from-splitting-xg7876yk4r.pdf

Functionalized Single Graphene Sheets Derived from Splitting Graphite Oxide

The development of nanocrystals has been intensively pursued, not only for their fundamental scientific interest, but also for many technological applications. The synthesis of monodisperse nanocrystals (size variation <5%) is of key importance, because the properties of these nanocrystals depend strongly on their dimensions. For example, the colour sharpness of semiconductor nanocrystal-based optical devices is strongly dependent on the uniformity of the nanocrystals, and monodisperse magnetic nanocrystals are critical for the next-generation multi-terabit magnetic storage media. For these monodisperse nanocrystals to be used, an economical mass-production method needs to be developed. Unfortunately, however, in most syntheses reported so far, only sub-gram quantities of monodisperse nanocrystals were produced. Uniform-sized nanocrystals of CdSe (refs 10,11) and Au (refs 12,13) have been produced using colloidal chemical synthetic procedures. In addition, monodisperse magnetic nanocrystals such as Fe (refs 14,15), Co (refs 16-18), gamma-Fe(2)O(3) (refs 19,20), and Fe(3)O(4) (refs 21,22) have been synthesized by using various synthetic methods. Here, we report on the ultra-large-scale synthesis of monodisperse nanocrystals using inexpensive and non-toxic metal salts as reactants. We were able to synthesize as much as 40 g of monodisperse nanocrystals in a single reaction, without a size-sorting process. Moreover, the particle size could be controlled simply by varying the experimental conditions. The current synthetic procedure is very general and nanocrystals of many transition metal oxides were successfully synthesized using a very similar procedure.

/pdf/ultra-large-scale-syntheses-of-monodisperse-nanocrystals-5ato45sv4b.pdf

Ultra-large-scale syntheses of monodisperse nanocrystals.

One-Nanometer-Scale Size-Controlled Synthesis of Monodisperse Magnetic Iron Oxide Nanoparticles†

Diffusion, coalescence, and reconstruction of vacancy defects in graphene layers are investigated by tight-binding molecular dynamics (TBMD) simulations and by first principles total energy calculations. It is observed in the TBMD simulations that two single vacancies coalesce into a 5-8-5 double vacancy at the temperature of 3000 K, and it is further reconstructed into a new defect structure, the 555-777 defect, by the Stone-Wales type transformation at higher temperatures. First principles calculations confirm that the 555-777 defect is energetically much more stable than two separated single vacancies, and the energy of the 555-777 defect is also slightly lower than that of the 5-8-5 double vacancy. In TBMD simulation, it is also found that the four single vacancies reconstruct into two collective 555-777 defects which is the unit for the hexagonal haeckelite structure proposed by Terrones et al. [Phys. Rev. Lett. 84, 1716 (2000)].

Diffusion, Coalescence, and Reconstruction of Vacancy Defects in Graphene Layers

We studied the kinetics of the formation of iron oxide nanocrystals obtained from the solution-phase thermal decomposition of iron−oleate complex via the “heating-up” process. To obtain detailed information on the thermal decomposition process and the formation of iron oxide nanocrystals in the solution, we performed a thermogravimetric-mass spectrometric analysis (TG-MS) and in-situ magnetic measurements using SQUID. The TG-MS results showed that iron−oleate complex was decomposed at around 320 °C. The in-situ SQUID data revealed that the thermal decomposition of iron−oleate complex generates intermediate species, which seem to act as monomers for the iron oxide nanocrystals. Extensive studies on the nucleation and growth process using size exclusion chromatography, the crystallization yield data, and TEM showed that the sudden increase in the number concentration of the nanocrystals (burst of nucleation) is followed by the rapid narrowing of the size distribution (size focusing). We constructed a theore...

Kinetics of Monodisperse Iron Oxide Nanocrystal Formation by “Heating-Up” Process

/pdf/diffusion-coalescence-and-reconstruction-of-vacancy-defects-1ohljblf7n.pdf

Nong-Moon Hwang

Papers

Ultra-large-scale syntheses of monodisperse nanocrystals.

One-Nanometer-Scale Size-Controlled Synthesis of Monodisperse Magnetic Iron Oxide Nanoparticles†

Diffusion, Coalescence, and Reconstruction of Vacancy Defects in Graphene Layers

Kinetics of Monodisperse Iron Oxide Nanocrystal Formation by “Heating-Up” Process

Diffusion, Coalescence, and Reconstruction of Vacancy Defects in Graphene Layers