Colloidal processing of ceramics is reviewed with an emphasis on interparticle forces, suspension rheology, consolidation techniques, and drying behavior. Particular attention is given to the scientific concepts that underpin the fabrication of particulate-derived ceramic components. The complex interplay between suspension stability and its structural evolution during colloidal processing is highlighted.

/pdf/colloidal-processing-of-ceramics-1f3f618kn7.pdf

Colloidal Processing of Ceramics

THE aggregation of colloidal particles is of fundamental importance in colloid science and its applications. The recent application of scaling concepts1,2 has resulted in a much deeper understanding of the structure of colloidal aggregates and the kinetics of their formation. Two distinct, limiting regimes of irreversible colloid aggregation have been identified3. Diffusion-limited colloid aggregation occurs when there is negligible repulsive force between the colloidal particles, so that the aggregation rate is limited solely by the time taken for clusters to encounter each other by diffusion. Reaction-limited colloid aggregation occurs when there is still a substantial, but not insurmountable, repulsive force beween the particles, so that the aggregation rate is limited by the time taken for two clusters to overcome this repulsive barrier by thermal activation. These regimes correspond to the limiting cases of rapid and slow colloid aggregation that have long been recognized in colloid science4. An intriguing possibility suggested by recent work is that each of these limiting regimes of colloid aggregation is universal, independent of the chemical details of the particular colloid system. Here we investigate the aggregation of three chemically different colloidal systems under both diffusion-limited and reaction-limited aggregation conditions. A scaling analysis of light-scattering data is used to compare the behaviour and provides convincing experimental evidence that the two regimes of aggregation are indeed universal.

Universality in colloid aggregation

1. Introduction to colloid science and rheology 2. Hydrodynamic effects 3. Brownian hard spheres 4. Stable colloidal suspensions 5. Non-spherical particles 6. Weakly flocculated suspensions 7. Thixotropy 8. Shear thickening 9. Rheometry of suspensions 10. Suspensions in viscoelastic media 11. Advanced topics.

Colloidal Suspension Rheology

https://cyberleninka.org/article/n/397502.pdf

Melt rheology of organoclay and fumed silica nanocomposites

Pickering–Ramsden emulsions and other forms of particle stabilized soft materials have received quite some attention recently because of the relative ease of formulation and the possibility to create novel materials. There is, however, a clear need for approaches that are versatile and efficient. In the present work the effect of aspect ratio of particles on the stability of both water-in-oil and oil-in-water emulsions is investigated experimentally. Two types of non-spherical particles are used. Hydrophobic prolate ellipsoids with aspect ratios ranging from 1 to 9 are obtained by stretching polystyrene latex particles. Hydrophilic spindle type hematite particles have been synthesized with aspect ratios ranging from 1 to 6. A strong dependence of emulsion stability on the aspect ratio of the particles is observed. Optical as well as cryogenic scanning electron microscopy are used to visualize the droplet morphology and particulate structure and reveal fairly densely packed monolayers of ellipsoids, consistent with the mechanism of limited coalescence. Yet stable emulsions are only obtained for particles with a sufficient aspect ratio. Surface rheology on planar monolayers demonstrates the pronounced effect of aspect ratio on the surface moduli. The magnitude of the interfacial viscoelastic properties is shown to strongly depend on the aspect ratio at a given surface coverage. This is most probably due to an increased effective coverage and the occurrence of strong attractive shape induced capillary interactions. The dependence of the surface rheological properties on the aspect ratio of the particles rationalizes the observed emulsion stability as the surface rheological properties play a role in the coalescence process. The results demonstrate that interfaces with controlled surface rheology, as obtained by using shape induced capillary forces and packing effects, can be used for the rational design of Pickering emulsions and other types of high interface materials.

Exploiting particle shape in solid stabilized emulsions

Dispersion properties of silica particles in nonaqueous media with a non-ionic surfactant, dodecyl hexaethylene glycol monoether, C12E6

The steady shear viscosity, dynamic viscoelasticity, and high shear wave rigidity modulus were measured for silica dispersions stabilized by a nonionic surfactant, dodecyl hexa ethylene glycol mono...

Rheological studies of stability of colloidal silica particles dispersed in monoethylene glycol (MEG) stabilized by dodecyl hexa ethylene glycol monoether (C12E6).

Paul D. Mills

Papers

Dispersion properties of silica particles in nonaqueous media with a non-ionic surfactant, dodecyl hexaethylene glycol monoether, C12E6

Rheological studies of stability of colloidal silica particles dispersed in monoethylene glycol (MEG) stabilized by dodecyl hexa ethylene glycol monoether (C12E6).