羟氨苄青霉素引起大疱性类天疱疮样疹

Electrophoretic deposition (EPD) is attracting increasing interest as a materials processing technique for a wide range of technical applications. This technique enables the production of unique microstructures and nanostructures as well as novel and complex material combinations in a variety of macroscopic shapes, dimensions and arrangements starting from micron-sized or nanosized particles. This review presents a comprehensive summary of relevant recent work on EPD describing the application of the technique in the processing of several traditional and advanced materials (functional and structural ceramic coatings, composite and porous materials, laminated ceramics, functionally graded materials, thin films and nanostructured materials), with the intention to highlight how EPD evolved from being a technique restricted only to traditional ceramics to become an important tool in advanced materials processing and nanotechnology. Moreover the fundamental EPD mechanisms and novel theories proposed to clarify the processes involved are explained.

Electrophoretic deposition: From traditional ceramics to nanotechnology

Electrophoretic deposition (EPD) is attracting increasing attention as an effective technique for the processing of biomaterials, specifically bioactive coatings and biomedical nanostructures. The well-known advantages of EPD for the production of a wide range of microstructures and nanostructures as well as unique and complex material combinations are being exploited, starting from well-dispersed suspensions of biomaterials in particulate form (microsized and nanoscale particles, nanotubes, nanoplatelets). EPD of biological entities such as enzymes, bacteria and cells is also being investigated. The review presents a comprehensive summary and discussion of relevant recent work on EPD describing the specific application of the technique in the processing of several biomaterials, focusing on (i) conventional bioactive (inorganic) coatings, e.g. hydroxyapatite or bioactive glass coatings on orthopaedic implants, and (ii) biomedical nanostructures, including biopolymer–ceramic nanocomposites, carbon nanotube coatings, tissue engineering scaffolds, deposition of proteins and other biological entities for sensors and advanced functional coatings. It is the intention to inform the reader on how EPD has become an important tool in advanced biomaterials processing, as a convenient alternative to conventional methods, and to present the potential of the technique to manipulate and control the deposition of a range of nanomaterials of interest in the biomedical and biotechnology fields.

https://royalsocietypublishing.org/doi/pdf/10.1098/rsif.2010.0156.focus

Electrophoretic deposition of biomaterials

Twinning-related grain boundary engineering

This review critically examines the current state of graphene reinforced metal (GNP-MMC) and ceramic matrix composites (GNP-CMC) The use of graphene as reinforcement for structural materials is motivated by their exceptional mechanical/functional properties and their unique physical/chemical characteristics This review focuses on MMCs and CMCs because of their technological importance for structural applications and the unique challenges associated with developing high-temperature composites with nanoparticle reinforcements The review discusses processing techniques, effects of graphene on the mechanical behaviour of GNP-MMCs and GNP-CMCs, including early studies on the tribological performance of graphene-reinforced composites, where graphene has shown signs of serving as a protective and lubricious phase Additionally, the unique functional properties endowed by graphene to GNP-MMCs and GNP-CMCs, such as enhanced thermal/electrical conductivity, improved oxidation resistance, and excellent bi

Graphene reinforced metal and ceramic matrix composites: a review

Fracture toughness and toughening mechanisms in graphene platelet reinforced Si3N4 composites

Mechanical and tribological properties of nanocomposites with silicon nitride matrix with addition of 1 and 3 wt% of various types of graphene platelets were studied. The wear behavior was observed by means of the ball-on-disk technique with a silicon nitride ball used as the tribological counterpart at room temperature in dry sliding. Coefficient of friction and specific wear rates were calculated and related to the damage mechanisms observed in the wear tracks. The measured properties were then assessed with respect to the type and volume fraction of the graphene additives. It is shown that addition of such amounts of carbon phases does not lower the coefficient of friction. Graphene platelets seem to be integrated into the matrix very strongly and they do not participate in lubricating processes. The best performance offers materials with 3 wt% of larger sized graphene, which have the highest wear resistance.

Tribological properties of Si3N4–graphene nanocomposites

Orientation-dependent hardness and nanoindentation-induced deformation mechanisms of WC crystals

Wear resistance of Al2O3–CNT ceramic nanocomposites at room and high temperatures

Two SiC/Si3N4 nano/micro composites were prepared from a starting mixture of crystalline α-Si3N4, amorphous SiNC, Y2O3 and/or Al2O3. The composite material for room temperature (RT) application has high strength of 1200 MPa, Weibull modulus of 19 and moderate fracture toughness of 7 MPa m1/2. The composite for high temperature (HT) application, without Al2O3 has RT strength of 710 MPa and is able to keep 60% of its RT strength up to 1300°C. The creep resistance of composite material is approx. 1 order higher compared to relative monolith up to 1400°C.

Pavol Hvizdoš

Papers

Fracture toughness and toughening mechanisms in graphene platelet reinforced Si3N4 composites

Tribological properties of Si3N4–graphene nanocomposites

Orientation-dependent hardness and nanoindentation-induced deformation mechanisms of WC crystals

Wear resistance of Al2O3–CNT ceramic nanocomposites at room and high temperatures

SiC/Si3N4 nano/micro-composite — processing, RT and HT mechanical properties