A method and circuit adaptively adjust the timing offset of a digital signal relative to a clock signal output coincident with that digital signal to enable a latch receiving the digital signal to store the digital signal responsive to the clock signal. The digital signal is applied to the latch, and stored in the latch responsive to the clock signal. The digital signal stored in the latch is evaluated to determine if the stored digital signal has an expected value. The timing offset of the digital signal is thereafter adjusted relative to the clock signal. and the digital signal is once again stored in the latch responsive to the clock signal at the new timing offset. A number of digital signals at respective timing offsets relative to the clock signal are stored and evaluated, and a final timing offset of the digital signal is selected from the ones of the timing offsets that cause the latch to store the digital signal having the expected value. The timing offset of the digital signal is thereafter adjusted to the selected final timing offset. A read synchronization circuit may adaptively adjust the timing offset of digital signals in this manner, and such a read synchronization circuit may be utilized in many types of integrated circuits, including packetized dynamic random access memories, memory systems including a memory controller and one or more such packetized dynamic random access memories, and in computer systems including a plurality of such packetized dynamic random access memories.

Method and apparatus for adaptively adjusting the timing offset between a clock signal and digital signals transmitted coincident with that clock signal, and memory device and system using same

A integrated circuit, such as a memory integrated circuit, includes a vernier clock adjustment circuit receiving an input clock signal and providing a rising-edge clock signal representing the input clock signal delayed by a rising-edge delay and providing a falling-edge clock signal representing the input clock signal delayed by a falling-edge delay. An edge triggered circuit receives data and the rising-edge and falling-edge clock signals, and stores data at the rising-edge of the rising-edge clock signal and at the falling-edge of the falling-edge clock signal. One form of the invention is a memory system having a memory controller coupled to memory modules through data and command busses. Each memory module includes the vernier clock adjustment circuitry.

Clock vernier adjustment

A 4.9-6.4-Gb/s two-level SerDes ASIC I/O core employing a four-tap feed-forward equalizer (FFE) in the transmitter and a five-tap decision-feedback equalizer (DFE) in the receiver has been designed in 0.13-/spl mu/m CMOS. The transmitter features a total jitter (TJ) of 35 ps p-p at 10/sup -12/ bit error rate (BER) and can output up to 1200 mVppd into a 100-/spl Omega/ differential load. Low jitter is achieved through the use of an LC-tank-based VCO/PLL system that achieves a typical random jitter of 0.6 ps over a phase noise integration range from 6 MHz to 3.2 GHz. The receiver features a variable-gain amplifier (VGA) with gain ranging from -6to +10dB in /spl sim/1dB steps, an analog peaking amplifier, and a continuously adapted DFE-based data slicer that uses a hybrid speculative/dynamic feedback architecture optimized for high-speed operation. The receiver system is designed to operate with a signal level ranging from 50 to 1200 mVppd. Error-free operation of the system has been demonstrated on lossy transmission line channels with over 32-dB loss at the Nyquist (1/2 Bd rate) frequency. The Tx/Rx pair with amortized PLL power consumes 290 mW of power from a 1.2-V supply while driving 600 mVppd and uses a die area of 0.79 mm/sup 2/.

A 6.4-Gb/s CMOS SerDes core with feed-forward and decision-feedback equalization

A programmable logic device (“PLD”) is augmented with programmable clock data recover (“CDR”) circuitry to allow the PLD to communicate via any of a large number of CDR signaling protocols. The CDR circuitry may be integrated with the PLD, or it may be wholly or partly on a separate integrated circuit. The circuitry may be capable of CDR input, CDR output, or both. The CDR capability may be provided in combination with other non-CDR signaling capability such as non-CDR low voltage differential signaling (“LVDS”). The circuitry may be part of a larger system.

Clock data recovery circuitry associated with programmable logic device circuitry

A system for adjusting the phase of an internal clock signal relative to an external clock signal in a packetized dynamic random access memory device. The system applies a plurality of initialization packets to the memory device that are captured in a shift register responsive to a transition of the internal clock signal. However, the phase of the internal clock signal is sequentially incremented after each initialization packet has been captured in the shift register. After a plurality of initialization packets have been captured, an evalution circuit identifies which phases of the internal clock signal clocked the shift register at the proper time to accurately capture each initialization packet. A single phase of the internal clock signal is then selected from within the range of internal clock signal phases that successfully captured initialization packets. This selected phase of the internal clock signal is used during normal operation of the memory device.

Method and apparatus for adaptively adjusting the timing of a clock signal used to latch digital signals, and memory device using same

Phase-locked loops (PLL) are widely used for clock-phase synchronization, frequency synthesis and clock distribution It is highly desirable that the standard digital CMOS process be used in the PLL design because process modifications increase product cost Other desirable features include insensitivity to noise and a fully integrated design The PLL design reported in this paper has all the above features A standard digital CMOS process is used to produce a fully differential structure that is immune to substrate and supply noise The PLL function includes multiplication of frequency and synchronization of input and output clock phases The architecture is unique because resistors are not needed for PLL loop stabilization

R. Chmela

Papers

Fully integrated CMOS phase-locked loop with 15 to 240 MHz locking range and /spl plusmn/50 ps jitter