[1] The Shuttle Radar Topography Mission produced the most complete, highest-resolution digital elevation model of the Earth. The project was a joint endeavor of NASA, the National Geospatial-Intelligence Agency, and the German and Italian Space Agencies and flew in February 2000. It used dual radar antennas to acquire interferometric radar data, processed to digital topographic data at 1 arc sec resolution. Details of the development, flight operations, data processing, and products are provided for users of this revolutionary data set.

/pdf/the-shuttle-radar-topography-mission-4x49lt5xnj.pdf

The Shuttle Radar Topography Mission

Temporal and geometrical decorrelation often prevents SAR interferometry from being an operational tool for surface deformation monitoring and topographic profile reconstruction. Moreover, atmospheric disturbances can strongly compromise the accuracy of the results. The authors present a complete procedure for the identification and exploitation of stable natural reflectors or permanent scatterers (PSs) starting from long temporal series of interferometric SAR images. When, as it often happens, the dimension of the PS is smaller than the resolution cell, the coherence is good even for interferograms with baselines larger than the decorrelation one, and all the available images of the ESA ERS data set can be successfully exploited. On these pixels, submeter DEM accuracy and millimetric terrain motion detection can be achieved, since atmospheric phase screen (APS) contributions can be estimated and removed. Examples are then shown of small motion measurements, DEM refinement, and APS estimation and removal in the case of a sliding area in Ancona, Italy. ERS data have been used.

Permanent scatterers in SAR interferometry

We present a new differential synthetic aperture radar (SAR) interferometry algorithm for monitoring the temporal evolution of surface deformations. The presented technique is based on an appropriate combination of differential interferograms produced by data pairs characterized by a small orbital separation (baseline) in order to limit the spatial decorrelation phenomena. The application of the singular value decomposition method allows us to easily "link" independent SAR acquisition datasets, separated by large baselines, thus increasing the observation temporal sampling rate. The availability of both spatial and temporal information in the processed data is used to identify and filter out atmospheric phase artifacts. We present results obtained on the data acquired from 1992 to 2000 by the European Remote Sensing satellites and relative to the Campi Flegrei caldera and to the city of Naples, Italy, that demonstrate the capability of the proposed approach to follow the dynamics of the detected deformations.

/pdf/a-new-algorithm-for-surface-deformation-monitoring-based-on-ot8ep5chnm.pdf

A new algorithm for surface deformation monitoring based on small baseline differential SAR interferograms

On February 22, 2000 Space Shuttle Endeavour landed at Kennedy Space Center, completing the highly successful 11-day flight of the Shuttle Radar Topography Mission (SRTM). Onboard were over 300 high-density tapes containing data for the highest resolution, most complete digital topographic map of Earth ever made. SRTM is a cooperative project between NASA and the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense. The mission was designed to use a single-pass radar interferometer to produce a digital elevation model (DEM) of the Earth's land surface between about 60 deg north and 56 deg south latitude. When completed, the DEM will have 30 m pixel spacing and about 15 m vertical accuracy. Two orthorectified image mosaics (one from the ascending passes with illumination from the southeast and one from descending passes with illumination from the southwest) will also be produced.

Synthetic aperture radar interferometry is an imaging technique for measuring the topography of a surface, its changes over time, and other changes in the detailed characteristic of the surface. By exploiting the phase of the coherent radar signal, interferometry has transformed radar remote sensing from a largely interpretive science to a quantitative tool, with applications in cartography, geodesy, land cover characterization, and natural hazards. This paper reviews the techniques of interferometry, systems and limitations, and applications in a rapidly growing area of science and engineering.

/pdf/synthetic-aperture-radar-interferometry-28lm7jf0if.pdf

Synthetic aperture radar interferometry

ERS-1 Bistatic Radar Images

Ephemeris, Radar Radius, and Radar Topography of Mars

Observations with the Haystack-Gold-stone Interferometer of Phase Scintillations due to the Solar Corona.

In order to increase the usefulness of Goldstone orbital debris observations, several improvements are planned to the experimental Goldstone radar. The first improvement is to add a ranging capability of 1-km accuracy to the radar. This would provide much more detailed information about whatever debris is observed. The second improvement is to widen the bandwidth of the system from 10 kHz to 85 kHz so that particles in more elliptical orbits can be monitored. The two antennas could then also be pointed away from the zenith, say south, where orbits of lesser inclination might also be observed. In any case, the addition of ranging requires a substantial increase of system bandwidth. This article describes the instrumentation necessary to achieve this, together with required signal-processing modifications.

Orbital Debris Radar Instrumentation

https://science.sciencemag.org/content/sci/162/3857/1028.2.full.pdf

Richard M. Goldstein

Papers

ERS-1 Bistatic Radar Images

Ephemeris, Radar Radius, and Radar Topography of Mars

Observations with the Haystack-Gold-stone Interferometer of Phase Scintillations due to the Solar Corona.

Orbital Debris Radar Instrumentation

Effect of Mass on Frequency