Recent research activities on the linear magnetoelectric (ME) effect?induction of magnetization by an electric field or of polarization by a magnetic field?are reviewed. Beginning with a brief summary of the history of the ME effect since its prediction in 1894, the paper focuses on the present revival of the effect. Two major sources for 'large' ME effects are identified. (i) In composite materials the ME effect is generated as a product property of a magnetostrictive and a piezoelectric compound. A linear ME polarization is induced by a weak ac magnetic field oscillating in the presence of a strong dc bias field. The ME effect is large if the ME coefficient coupling the magnetic and electric fields is large. Experiments on sintered granular composites and on laminated layers of the constituents as well as theories on the interaction between the constituents are described. In the vicinity of electromechanical resonances a ME voltage coefficient of up to 90?V?cm?1?Oe?1 is achieved, which exceeds the ME response of single-phase compounds by 3?5 orders of magnitude. Microwave devices, sensors, transducers and heterogeneous read/write devices are among the suggested technical implementations of the composite ME effect. (ii) In multiferroics the internal magnetic and/or electric fields are enhanced by the presence of multiple long-range ordering. The ME effect is strong enough to trigger magnetic or electrical phase transitions. ME effects in multiferroics are thus 'large' if the corresponding contribution to the free energy is large. Clamped ME switching of electrical and magnetic domains, ferroelectric reorientation induced by applied magnetic fields and induction of ferromagnetic ordering in applied electric fields were observed. Mechanisms favouring multiferroicity are summarized, and multiferroics in reduced dimensions are discussed. In addition to composites and multiferroics, novel and exotic manifestations of ME behaviour are investigated. This includes (i) optical second harmonic generation as a tool to study magnetic, electrical and ME properties in one setup and with access to domain structures; (ii) ME effects in colossal magnetoresistive manganites, superconductors and phosphates of the LiMPO4 type; (iii) the concept of the toroidal moment as manifestation of a ME dipole moment; (iv) pronounced ME effects in photonic crystals with a possibility of electromagnetic unidirectionality. The review concludes with a summary and an outlook to the future development of magnetoelectrics research.

https://iopscience.iop.org/article/10.1088/0022-3727/38/8/R01/pdf

Revival of the Magnetoelectric Effect

Ferroelectric ceramics were born in the early 1940s with the discovery of the phenomenon of ferroelectricity as the source of the unusually high dielectric constant in ceramic barium titanate capacitors. Since that time, they have been the heart and soul of several multibillion dollar industries, ranging from high-dielectric-constant capacitors to later developments in piezoelectric transducers, positive temperature coefficient devices, and electrooptic light valves. Materials based on two compositional systems, barium titanate and lead zirconate titanate, have dominated the field throughout their history. The more recent developments in the field of ferroelectric ceramics, such as medical ultrasonic composites, high-displacement piezoelectric actuators (Moonies, RAINBOWS), photostrictors, and thin and thick films for piezoelectric and integrated-circuit applications have served to keep the industry young amidst its growing maturity. Various ceramic formulations, their form (bulk, films), fabrication, function (properties), and future are described in relation to their ferroelectric nature and specific areas of application.

/pdf/ferroelectric-ceramics-history-and-technology-40j9enkrwl.pdf

Ferroelectric ceramics : History and technology

Multiferroic magnetoelectric materials, which simultaneously exhibit ferroelectricity and ferromagnetism, have recently stimulated a sharply increasing number of research activities for their scientific interest and significant technological promise in the novel multifunctional devices. Natural multiferroic single-phase compounds are rare, and their magnetoelectric responses are either relatively weak or occurs at temperatures too low for practical applications. In contrast, multiferroic composites, which incorporate both ferroelectric and ferri-/ferromagnetic phases, typically yield giant magnetoelectric coupling response above room temperature, which makes them ready for technological applications. This review of mostly recent activities begins with a brief summary of the historical perspective of the multiferroic magnetoelectric composites since its appearance in 1972. In such composites the magnetoelectric effect is generated as a product property of a magnetostrictive and a piezoelectric substance. A...

Multiferroic magnetoelectric composites: Historical perspective, status, and future directions

In this chapter, we will restrict our attention to the ferrites and a few other closely related materials. The great interest in ferrites stems from their unique combination of a spontaneous magnetization and a high electrical resistivity. The observed magnetization results from the difference in the magnetizations of two non-equivalent sub-lattices of the magnetic ions in the crystal structure. Materials of this type should strictly be designated as “ferrimagnetic” and in some respects are more closely related to anti-ferromagnetic substances than they are to ferromagnetics in which the magnetization results from the parallel alignment of all the magnetic moments present. We shall not adhere to this special nomenclature except to emphasize effects, which are due to the existence of the sub-lattices.

Ferromagnetic materials

A large body of work has been reported in the last 5 years on the development of lead-free piezoceramics in the quest to replace lead–zirconate–titanate (PZT) as the main material for electromechanical devices such as actuators, sensors, and transducers. In specific but narrow application ranges the new materials appear adequate, but are not yet suited to replace PZT on a broader basis. In this paper, general guidelines for the development of lead-free piezoelectric ceramics are presented. Suitable chemical elements are selected first on the basis of cost and toxicity as well as ionic polarizability. Different crystal structures with these elements are then considered based on simple concepts, and a variety of phase diagrams are described with attractive morphotropic phase boundaries, yielding good piezoelectric properties. Finally, lessons from density functional theory are reviewed and used to adjust our understanding based on the simpler concepts. Equipped with these guidelines ranging from atom to phase diagram, the current development stage in lead-free piezoceramics is then critically assessed.

Perspective on the Development of Lead-free Piezoceramics

Connectivity and piezoelectric-pyroelectric composites

Percolation and Bruggeman's effective media theories, as they apply to the electrical conductivity of composites, are reviewed, and a general effective media (GEM) equation, which combines most aspects of both percolation and effective media theories, is introduced. It is then shown that the GEM equation quantitatively fits electrical resistivity (conductivity) as a function of the volume fraction data for binary composites. The parameters used to fit the experimental data are the electrical resistivities of the two phases, the percolation threshold for the lower resistivity phase (oc), and an exponent t. Preliminary work, showing how the GEM equation can be used to model the piezoresistivity of composites by postulating that oc is a function of the independent variable, is also presented.

Electrical Resistivity of Composites

Materials for high temperature acoustic and vibration sensors: A review

Structural basis of ferroelectricity in the bismuth titanate family

This paper reviews the current trends and historical development of piezoelectric sensors and sensor materials technology. It begins with a discussion of the bases of piezo- and ferroelectric activity, followed by an overview of the most commonly used piezoelectric ceramic: lead zirconate titanate (PZT). A discussion of the properties and applications of piezoelectric crystals and additional piezoelectric ceramics is followed by a description of several sensor configurations prepared from bulk ceramics. An extensive review and comparison of piezoelectric ceramic—polymer composite sensors based on the connectivity of the constituent phases is also presented. We conclude our discussion of sensor configurations with recent examples of piezoelectric ceramic—metal composite sensors, and expected future developments in the area of piezoelectric sensors.

Robert E. Newnham

Papers

Connectivity and piezoelectric-pyroelectric composites

Electrical Resistivity of Composites

Materials for high temperature acoustic and vibration sensors: A review

Structural basis of ferroelectricity in the bismuth titanate family

Piezoelectric Sensors and Sensor Materials