The rise in output power from rare-earth-doped fiber sources over the past decade, via the use of cladding-pumped fiber architectures, has been dramatic, leading to a range of fiber-based devices with outstanding performance in terms of output power, beam quality, overall efficiency, and flexibility with regard to operating wavelength and radiation format. This success in the high-power arena is largely due to the fiber’s geometry, which provides considerable resilience to the effects of heat generation in the core, and facilitates efficient conversion from relatively low-brightness diode pump radiation to high-brightness laser output. In this paper we review the current state of the art in terms of continuous-wave and pulsed performance of ytterbium-doped fiber lasers, the current fiber gain medium of choice, and by far the most developed in terms of high-power performance. We then review the current status and challenges of extending the technology to other rare-earth dopants and associated wavelengths of operation. Throughout we identify the key factors currently limiting fiber laser performance in different operating regimes—in particular thermal management, optical nonlinearity, and damage. Finally, we speculate as to the likely developments in pump laser technology, fiber design and fabrication, architectural approaches, and functionality that lie ahead in the coming decade and the implications they have on fiber laser performance and industrial/scientific adoption.

High power fiber lasers: current status and future perspectives [Invited]

During the last two decades atmospheric (or high) pressure non-thermal plasmas in and in contact with liquids have received a lot of attention in view of their considerable environmental and medical applications. The simultaneous generation of intense UV radiation, shock waves and active radicals makes these discharges particularly suitable for decontamination, sterilization and purification purposes. This paper reviews the current status of research on atmospheric pressure non-thermal discharges in and in contact with liquids. The emphasis is on their generation mechanisms and their physical characteristics.

http://iopscience.iop.org/article/10.1088/0022-3727/42/5/053001/pdf

Non-thermal plasmas in and in contact with liquids

The mechanism regulating the production of steroids in response to trophic hormone stimulation has been the subject of investigation for over three decades. When considering the effects of trophic hormones on the steroidogenic process it is necessary to first distinguish between acute effects and chronic effects. Acute effects are those which result in the very rapid (within minutes) synthesis and secretion of steroids in response to hormone stimulation and involve the rapid translocation of intracellular cholesterol to the site of its cleavage, as will be discussed later. Chronic effects are those which occur on the order of hours to tens of hours and involve increased gene transcription and translation of the proteins involved in the biosynthesis of steroids. This chapter will focus on studies designed to elucidate the mechanisms involved in the acute regulation of steroid production in response to hormone stimulation. Overviews of the effects of chronic stimulation on steroidogenic enzymes have appeared in several excellent review articles (Simpson and Waterman 1983; Miller 1988; Hanukoglu 1992).

Regulation of the acute production of steroids in steroidogenic cells.

The controllable synthesis of nanostructured CeO2-based materials is an imperative issue for environment- and energy-related applications. In this review, we present the recent technological and theoretical advances related to the CeO2-based nanomaterials, with a focus on the synthesis from one dimensional to mesoporous ceria as well as the properties from defect chemistry to nano-size effects. Seven extensively studied aspects regarding the applications of nanostructured ceria-based materials are selectively surveyed as well. New experimental approaches have been demonstrated with an atomic scale resolution characterization. Density functional theory (DFT) calculations can provide insight into the rational design of highly reactive catalysts and understanding of the interactions between the noble metal and ceria support. Achieving desired morphologies with designed crystal facets and oxygen vacancy clusters in ceria via controlled synthesis process is quite important for highly active catalysts. Finally, remarks on the challenges and perspectives on this exciting field are proposed.

Nanostructured ceria-based materials: synthesis, properties, and applications

In this paper, we summarize the fundamental properties and review the latest developments in high power fiber lasers. The review is focused primarily on the most common fiber laser configurations and the associated cladding pumping issues. Special attention is placed on pump combination techniques and the parameters that affect the brightness enhancement observed in single-mode and multimode high power fiber lasers. The review includes the major limitations imposed by fiber nonlinearities and other parasitic effects, such as optical damage, transverse modal instabilities and photodarkening. Finally, the paper summarizes the power evolution in continuous-wave and pulsed ytterbium-doped fiber lasers and their impact on industrial applications.

High Power Fiber Lasers: A Review

Photoelectron spectroscopic measurements have the potential to provide detailed mechanistic insight by resolving chemical states, electrochemically active regions and local potentials or potential losses in operating solid oxide electrochemical cells (SOCs), such as fuel cells. However, high-vacuum requirements have limited X-ray photoelectron spectroscopy (XPS) analysis of electrochemical cells to ex situ investigations. Using a combination of ambient-pressure XPS and CeO2-x/YSZ/Pt single-chamber cells, we carry out in situ spectroscopy to probe oxidation states of all exposed surfaces in operational SOCs at 750 °C in 1 mbar reactant gases H2 and H 2O. Kinetic energy shifts of core-level photoelectron spectra provide a direct measure of the local surface potentials and a basis for calculating local overpotentials across exposed interfaces. The mixed ionic/electronic conducting CeO2-x electrodes undergo Ce3+/Ce4+ oxidation-reduction changes with applied bias. The simultaneous measurements of local surface Ce oxidation states and electric potentials reveal the active ceria regions during H2 electro-oxidation and H2O electrolysis. The active regions extend ∼150 μm from the current collectors and are not limited by the three-phase-boundary interfaces associated with other SOC materials. The persistence of the Ce3+/Ce 4+ shifts in the ∼150 μm active region suggests that the surface reaction kinetics and lateral electron transport on the thin ceria electrodes are co-limiting processes.

Measuring fundamental properties in operating solid oxide electrochemical cells by using in situ X-ray photoelectron spectroscopy

Spectroscopies that make use of laser light have provided an important tool to modern researchers for the nonintrusive analysis of chemical systems. The strengths and limitations of these spectroscopic techniques often determine the viability of scientific investigations. The unique properties of degenerate four-wave mixing, a nonlinear optical technique, have recently been found to provide powerful capabilities for a wide range of applications.

http://science.sciencemag.org/content/sci/257/5078/1894.full.pdf

Detection of Trace Molecular Species Using Degenerate Four-Wave Mixing

High-resolution coherent anti-Stokes Raman spectroscopy spectra of the N(2) Q branch at 294 K have been obtained at 1, 5, and 10 atm. Even at 1-atm pressure, disagreements with spectra calculated using the isolated line approximation were observed, indicating the importance of collisional narrowing effects in describing these spectra. A method of using the full G-matrix approach for the calculation of these spectra that is both exact and computationally efficient (requiring only one matrix diagonalization and inversion per spectrum) is discussed. Excellent agreement with experimental data is obtained using this method and a simple exponential gap model for the off-diagonal G-matrix elements.

Calculation of collisionally narrowed coherent anti-Stokes Raman spectroscopy spectra.

We have numerically investigated the behavior of the fundamental mode of a step-index, multimode (MM) fiber as the optical power approaches the self-focusing limit (Pcrit). The analysis includes the effects of gain and bending (applicable to coiled fiber amplifiers). We find power-dependent, stationary solutions that propagate essentially without change at beam powers approaching Pcrit in straight and bent fibers. We show that in a MM fiber amplifier seeded with its fundamental eigenmode at powers ≪Pcrit, the transverse spatial profile adiabatically evolves through a continuum of stationary solutions as the beam is amplified toward Pcrit.

Peak-power limits on fiber amplifiers imposed by self-focusing

Vibrational and rotational Raman transitions are shown to be shifted to lower frequencies in the presence of a nonresonant, high-intensity optical field. Experimental results using coherent anti-Stokes Raman spectroscopy for hydrogen and nitrogen are presented. The magnitude of the observed shift is in agreement with a calculation which considers the coupling of the optical field to the internuclear separation via the molecular electronic polarizability. The magnitude of the shift is predicted to be proportional to the optical field intensity.

Roger L. Farrow

Papers

Measuring fundamental properties in operating solid oxide electrochemical cells by using in situ X-ray photoelectron spectroscopy

Detection of Trace Molecular Species Using Degenerate Four-Wave Mixing

Calculation of collisionally narrowed coherent anti-Stokes Raman spectroscopy spectra.

Peak-power limits on fiber amplifiers imposed by self-focusing

Observation of an optical Stark effect on vibrational and rotational transitions