The large-scale practical application of fuel cells will be difficult to realize if the expensive platinum-based electrocatalysts for oxygen reduction reactions (ORRs) cannot be replaced by other efficient, low-cost, and stable electrodes. Here, we report that vertically aligned nitrogen-containing carbon nanotubes (VA-NCNTs) can act as a metal-free electrode with a much better electrocatalytic activity, long-term operation stability, and tolerance to crossover effect than platinum for oxygen reduction in alkaline fuel cells. In air-saturated 0.1 molar potassium hydroxide, we observed a steady-state output potential of –80 millivolts and a current density of 4.1 milliamps per square centimeter at –0.22 volts, compared with –85 millivolts and 1.1 milliamps per square centimeter at –0.20 volts for a platinum-carbon electrode. The incorporation of electron-accepting nitrogen atoms in the conjugated nanotube carbon plane appears to impart a relatively high positive charge density on adjacent carbon atoms. This effect, coupled with aligning the NCNTs, provides a four-electron pathway for the ORR on VA-NCNTs with a superb performance.

http://science.sciencemag.org/content/sci/323/5915/760.full.pdf

Nitrogen-doped carbon nanotube arrays with high electrocatalytic activity for oxygen reduction.

Zinc oxide is a unique material that exhibits semiconducting and piezoelectric dual properties. Using a solid–vapour phase thermal sublimation technique, nanocombs, nanorings, nanohelixes/nanosprings, nanobelts, nanowires and nanocages of ZnO have been synthesized under specific growth conditions. These unique nanostructures unambiguously demonstrate that ZnO probably has the richest family of nanostructures among all materials, both in structures and in properties. The nanostructures could have novel applications in optoelectronics, sensors, transducers and biomedical sciences. This article reviews the various nanostructures of ZnO grown by the solid–vapour phase technique and their corresponding growth mechanisms. The application of ZnO nanobelts as nanosensors, nanocantilevers, field effect transistors and nanoresonators is demonstrated.

/pdf/zinc-oxide-nanostructures-growth-properties-and-applications-8d5hcz3lg8.pdf

Zinc oxide nanostructures: growth, properties and applications

This review analyses the literature from the early 1990s until the beginning of 2003 and covers the use of carbon nanotubes (CNT) and nanofibers as catalysts and catalysts supports. The article is composed of three sections, the first one explains why these materials can be suitable for these applications, the second describes the different preparation methods for supporting metallic catalysts on these supports, and the last one details the catalytic results obtained with nanotubes or nanofibers based catalysts. When possible, the results were compared to those obtained on classical carbonaceous supports and explanations are proposed to clarify the different behaviors observed.

Carbon nanotubes and nanofibers in catalysis

It is estimated that the world will need to double its energy supply by 2050. Nanotechnology has opened up new frontiers in materials science and engineering to meet this challenge by creating new materials, particularly carbon nanomaterials, for efficient energy conversion and storage. Comparing to conventional energy materials, carbon nanomaterials possess unique size-/surface-dependent (e.g., morphological, electrical, optical, and mechanical) properties useful for enhancing the energy-conversion and storage performances. During the past 25 years or so, therefore, considerable efforts have been made to utilize the unique properties of carbon nanomaterials, including fullerenes, carbon nanotubes, and graphene, as energy materials, and tremendous progress has been achieved in developing high-performance energy conversion (e.g., solar cells and fuel cells) and storage (e.g., supercapacitors and batteries) devices. This article reviews progress in the research and development of carbon nanomaterials during the past twenty years or so for advanced energy conversion and storage, along with some discussions on challenges and perspectives in this exciting field.

Carbon Nanomaterials for Advanced Energy Conversion and Storage

Nanoelectromechanical systems (NEMS) hold promise for a number of scientific and technological applications. In particular, NEMS oscillators have been proposed for use in ultrasensitive mass detection, radio-frequency signal processing, and as a model system for exploring quantum phenomena in macroscopic systems. Perhaps the ultimate material for these applications is a carbon nanotube. They are the stiffest material known, have low density, ultrasmall cross-sections and can be defect-free. Equally important, a nanotube can act as a transistor and thus may be able to sense its own motion. In spite of this great promise, a room-temperature, self-detecting nanotube oscillator has not been realized, although some progress has been made. Here we report the electrical actuation and detection of the guitar-string-like oscillation modes of doubly clamped nanotube oscillators. We show that the resonance frequency can be widely tuned and that the devices can be used to transduce very small forces.

A tunable carbon nanotube electromechanical oscillator

Aligned Coaxial Nanowires of Carbon Nanotubes Sheathed with Conducting Polymers

The bending modulus of individual carbon nanotubes from aligned arrays grown by pyrolysis was measured by in situ electromechanical resonance in transmission electron microscopy (TEM). The bending modulus of nanotubes with point defects was approximately 30 GPa and that of nanotubes with volume defect was 2-3 GPa. The time-decay constant of nanotube resonance in a vacuum of 10(-4) Torr was approximately 85 micros. A femtogram nanobalance was demonstrated based on nanotube resonance; it has the potential for measuring the mass of chain-structured large molecules. The in situ TEM provides a powerful approach towards nanomechanics of fiberlike nanomaterials with well-characterized defect structures.

http://www.nanoscience.gatech.edu/zlwang//paper/2000/00_PRL_1.pdf

Nanomechanics of individual carbon nanotubes from pyrolytically grown arrays.

http://www.nanoscience.gatech.edu/paper/2001/01_MSEC_1.pdf

Mechanical and electrostatic properties of carbon nanotubes and nanowires

Magnetic properties of Fe nanoparticles trapped at the tips of the aligned carbon nanotubes

Characterizing the physical properties of individual nanostructures is rather challenging because of the difficulty in manipulating the objects of sizes from nanometer to micrometer. Most of the nanomeasurements have been carried using STM and AFM. In this presentation, we demonstrate that transmission electron microscopy can be a powerful tool for quantitative measurements the mechanical, electrical and thermodynamic properties of a single nanostructure, such as a carbon nanotube or a nanoparticle. Using a customer-built specimen holder, in-situ measurements on the mechanical properties of carbon nanotubes has been carried out using the resonance phenomenon induced by an externally applied alternating voltage [1]. If an oscillating voltage is applied on the nanotube with tunable frequency, resonance can be induced (Fig. 1). The bending modulus is calculated from the resonance frequency. The bending modulus is as high as 1.2 TPa (as strong as diamond) for nanotubes with diameters smaller than 8 nm, and it drops to as low as 0.2 TPa for those with diameters larger than 30 nm.

Ruiping Gao

Papers

Aligned Coaxial Nanowires of Carbon Nanotubes Sheathed with Conducting Polymers

Nanomechanics of individual carbon nanotubes from pyrolytically grown arrays.

Mechanical and electrostatic properties of carbon nanotubes and nanowires

Magnetic properties of Fe nanoparticles trapped at the tips of the aligned carbon nanotubes

Towards Property Nanomeasurments By In-Situ TEM