Selective laser melting (SLM), as a novel additive manufacturing technique, has attracted increasing attention in copper alloys. In this research, to investigate forming processing and attendant mechanical properties of high-tin bronze in SLM, a statistical relationship between processing parameters (laser power, scanning speed and hatch space) and density of Cu-15Sn bronze in SLM was established using an experimental approach with response surface method and analysis of variance. As such, nearly fully-dense SLM Cu-15Sn bronze specimens were firstly manufactured whose reasonable microstructural evolution and mechanical properties were investigated before and after annealing and compared with QSn15-1-1 (GB/T 5231-2012) drawing specimens. It is found that the SLM Cu-15Sn specimens present the significantly fine grain microstructures that consist of cellular and dendritic structures. The ultimate tensile strength varies from ~ 661 MPa to ~ 545 MPa, the elongation at break from ~ 7.4% to ＞20% and the Vickers hardness ranges from ~ 212 HV 0.3 to ~ 168 HV 0.3 for SLM Cu-15Sn specimens after annealing, which are generally superior to those of QSn15-1-1 specimens. In addition, it has been proposed that the dominated strengthening mechanism of SLM Cu-15Sn parts has transformed from fine-grain to solid solution strengthening after annealing.

/pdf/processing-optimisation-mechanical-properties-and-328s644cui.pdf

Processing optimisation, mechanical properties and microstructural evolution during selective laser melting of Cu-15Sn high-tin bronze

A compositional study of Cypriot bronzes dating to the Early Iron Age using portable X-ray fluorescence spectrometry (pXRF)

Laser-induced breakdown spectroscopy of archaeological findings with calibration-free inverse method: comparison with classical laser-induced breakdown spectroscopy and conventional techniques.

Three bronze samples created by CNR-ISMN (National Research Council—Institute of Nanostructured Materials) to be similar to Punic and Roman coins found in Tharros (OR, Sardinia, Italy) were studied to identify the corrosion products on their surfaces and to evaluate the reliability of the reproduction process. Micro-Raman spectroscopy was chosen to investigate the corroded surfaces because it is a non-destructive technique, it has high spatial resolution, and it gives the opportunity to discriminate between polymorphs and to correlate colour and chemical composition. A significant amount of green copper hydroxychlorides (Cu2(OH)3Cl) was detected on all the coins. Their discrimination by Raman spectroscopy was challenging because the literature on the topic is currently confusing. Thus, it was necessary to determine the characteristic peaks of atacamite, clinoatacamite, and the recently discovered anatacamite by acquiring Raman spectra of comparable natural mineral samples. Clinoatacamite, with different degrees of order in its structure, was the major component identified on the three coins. The most widespread corrosion product, besides hydroxychlorides, was the red copper oxide cuprite (Cu2O). Other corrosion products of the elements of the alloy (laurionite, plumbonacrite, zinc carbonate) and those resulting from burial in the soil (anatase, calcite, hematite) were also found. This study shows that identification of corrosion products, including discrimination of copper hydroxychlorides, could be accomplished by micro-Raman on valuable objects, for example archaeological findings or works of art, avoiding any damage because of extraction of samples or the use of a destructive analytical technique.

Micro-Raman study of copper hydroxychlorides and other corrosion products of bronze samples mimicking archaeological coins

Analysis of metal objects with portable and handheld X-ray fluorescence spectrometry has become increasingly popular in recent years. Here, methodological concerns that apply to non-destructive, surface examination with XRF instruments of ancient metal artefacts are discussed based on the comparative analyses of a set of copper-based objects by means of portable X-ray fluorescence (pXRF) and electron probe microanalyser (EPMA). The analytical investigation aims to explore issues of instrument comparability and reliability of the non-invasive pXRF results. The different analytical approaches produce a comparable pattern for the major element concentrations, but substantial variation is evident when it comes to the absolute values for major and minor/trace elements.

/pdf/a-not-so-dangerous-method-pxrf-vs-epma-wds-analyses-of-4rnszb5wkd.pdf

A (not so) dangerous method: pXRF vs. EPMA-WDS analyses of copper-based artefacts

A large number of Cu-based archaeological artefacts from the Mediterranean basin have been selected for investigation of their chemical composition, metallurgical features and corrosion products (i.e. the patina). The guidelines for the selection of the Cu-based artefacts have taken into account the representativeness of the Mediterranean archaeological context, the manufacturing technique, the degradation state and the expected chemical composition and structure of the objects. The results show wide variation of the chemical composition of the alloys that include all kinds of ancient Cu-based alloys such as low and high tin, and also leaded bronzes, copper and copper-iron alloys. The examination of the alloy matrix shows largely different metallurgical features thus indicating the use of different manufacturing techniques for producing the artefacts. The results of the micro-chemical investigation of the patina show the structures and the chemical composition of the stratified corrosion layers where copper or tin depletion phenomenon are commonly observed with a remarkably surface enrichment of some soil elements such as P, S, Ca, Si, Fe, Al and Cl. This information indicates the strict interaction between soil components and corrosion reactions and products. In particular, the ubiquitous and near constant presence of chlorine in the corrosion layers is observed in the patina of the archaeological Cu-based artefacts found in different contexts in Italy, Turkey, Jordan, Egypt, Spain and Tunisia. This latter occurrence is considered dangerous because it could induce a cyclic corrosion reaction of copper that could disfigure the artefact. The micro-chemical and micro-structural results also show that another source of degradation of the bronze archaeological artefacts, are their intrinsic metallurgical features whose formation is induced during the manufacturing of the objects, carried out in ancient times by repeated cycles of cold or hot mechanical work and thermal treatments. These combined treatments induce crystallisation and segregation phenomena of the impurities along the grain boundaries and could cause mechanical weakness and increase the extent of the inter-granular corrosion phenomena. [ABSTRACT FROM AUTHOR]

Large scale investigation of chemical composition, structure and corrosion mechanism of bronze archeological artefacts from Mediterranean basin

In the framework of the EFESTUS project (funded by the European Commission, contract No. ICA3-CT-2002-10030) the corrosion products of a large number of archaeological bronze artefacts are investigated by means of the combined use of scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), X-ray diffraction (XRD) and optical microscopy (OM) and tentative correlation of their nature with the chemical composition of the artefacts and the burial context is proposed.

S. Khosroff

Papers

Large scale investigation of chemical composition, structure and corrosion mechanism of bronze archeological artefacts from Mediterranean basin

Uncommon corrosion phenomena of archaeological bronze alloys