There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality.

Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

I and i

From the Publisher: 
The accessible presentation of this book gives both a general view of the entire computer vision enterprise and also offers sufficient detail to be able to build useful applications. Users learn techniques that have proven to be useful by first-hand experience and a wide range of mathematical methods. A CD-ROM with every copy of the text contains source code for programming practice, color images, and illustrative movies. Comprehensive and up-to-date, this book includes essential topics that either reflect practical significance or are of theoretical importance. Topics are discussed in substantial and increasing depth. Application surveys describe numerous important application areas such as image based rendering and digital libraries. Many important algorithms broken down and illustrated in pseudo code. Appropriate for use by engineers as a comprehensive reference to the computer vision enterprise.

Computer vision : a modern approach = 计算机视觉 : 一种现代的方法

The discovery of the enhancement of Raman scattering by molecules adsorbed on nanostructured metal surfaces is a landmark in the history of spectroscopic and analytical techniques. Significant experimental and theoretical effort has been directed toward understanding the surface-enhanced Raman scattering (SERS) effect and demonstrating its potential in various types of ultrasensitive sensing applications in a wide variety of fields. In the 45 years since its discovery, SERS has blossomed into a rich area of research and technology, but additional efforts are still needed before it can be routinely used analytically and in commercial products. In this Review, prominent authors from around the world joined together to summarize the state of the art in understanding and using SERS and to predict what can be expected in the near future in terms of research, applications, and technological development. This Review is dedicated to SERS pioneer and our coauthor, the late Prof. Richard Van Duyne, whom we lost during the preparation of this article.

/pdf/present-and-future-of-surface-enhanced-raman-scattering-34aqgcm385.pdf

Present and Future of Surface-Enhanced Raman Scattering

Part I: Background and Fundamentals Introduction, Mohamed Gad-el-Hak, University of Notre Dame Scaling of Micromechanical Devices, William Trimmer, Standard MEMS, Inc., and Robert H. Stroud, Aerospace Corporation Mechanical Properties of MEMS Materials, William N. Sharpe, Jr., Johns Hopkins University Flow Physics, Mohamed Gad-el-Hak, University of Notre Dame Integrated Simulation for MEMS: Coupling Flow-Structure-Thermal-Electrical Domains, Robert M. Kirby and George Em Karniadakis, Brown University, and Oleg Mikulchenko and Kartikeya Mayaram, Oregon State University Liquid Flows in Microchannels, Kendra V. Sharp and Ronald J. Adrian, University of Illinois at Urbana-Champaign, Juan G. Santiago and Joshua I. Molho, Stanford University Burnett Simulations of Flows in Microdevices, Ramesh K. Agarwal and Keon-Young Yun, Wichita State University Molecular-Based Microfluidic Simulation Models, Ali Beskok, Texas A&M University Lubrication in MEMS, Kenneth S. Breuer, Brown University Physics of Thin Liquid Films, Alexander Oron, Technion, Israel Bubble/Drop Transport in Microchannels, Hsueh-Chia Chang, University of Notre Dame Fundamentals of Control Theory, Bill Goodwine, University of Notre Dame Model-Based Flow Control for Distributed Architectures, Thomas R. Bewley, University of California, San Diego Soft Computing in Control, Mihir Sen and Bill Goodwine, University of Notre Dame Part II: Design and Fabrication Materials for Microelectromechanical Systems Christian A. Zorman and Mehran Mehregany, Case Western Reserve University MEMS Fabrication, Marc J. Madou, Nanogen, Inc. LIGA and Other Replication Techniques, Marc J. Madou, Nanogen, Inc. X-Ray-Based Fabrication, Todd Christenson, Sandia National Laboratories Electrochemical Fabrication (EFAB), Adam L. Cohen, MEMGen Corporation Fabrication and Characterization of Single-Crystal Silicon Carbide MEMS, Robert S. Okojie, NASA Glenn Research Center Deep Reactive Ion Etching for Bulk Micromachining of Silicon Carbide, Glenn M. Beheim, NASA Glenn Research Center Microfabricated Chemical Sensors for Aerospace Applications, Gary W. Hunter, NASA Glenn Research Center, Chung-Chiun Liu, Case Western Reserve University, and Darby B. Makel, Makel Engineering, Inc. Packaging of Harsh-Environment MEMS Devices, Liang-Yu Chen and Jih-Fen Lei, NASA Glenn Research Center Part III: Applications of MEMS Inertial Sensors, Paul L. Bergstrom, Michigan Technological University, and Gary G. Li, OMM, Inc. Micromachined Pressure Sensors, Jae-Sung Park, Chester Wilson, and Yogesh B. Gianchandani, University of Wisconsin-Madison Sensors and Actuators for Turbulent Flows. Lennart Loefdahl, Chalmers University of Technology, and Mohamed Gad-el-Hak, University of Notre Dame Surface-Micromachined Mechanisms, Andrew D. Oliver and David W. Plummer, Sandia National Laboratories Microrobotics Thorbjoern Ebefors and Goeran Stemme, Royal Institute of Technology, Sweden Microscale Vacuum Pumps, E. Phillip Muntz, University of Southern California, and Stephen E. Vargo, SiWave, Inc. Microdroplet Generators. Fan-Gang Tseng, National Tsing Hua University, Taiwan Micro Heat Pipes and Micro Heat Spreaders, G. P. "Bud" Peterson, Rensselaer Polytechnic Institute Microchannel Heat Sinks, Yitshak Zohar, Hong Kong University of Science and Technology Flow Control, Mohamed Gad-el-Hak, University of Notre Dame) Part IV: The Future Reactive Control for Skin-Friction Reduction, Haecheon Choi, Seoul National University Towards MEMS Autonomous Control of Free-Shear Flows, Ahmed Naguib, Michigan State University Fabrication Technologies for Nanoelectromechanical Systems, Gary H. Bernstein, Holly V. Goodson, and Gregory L. Snider, University of Notre Dame Index

The MEMS Handbook

Optical Waveguide Theory

Piezo-actuated stages have become more and more promising in nanopositioning applications due to the excellent advantages of the fast response time, large mechanical force, and extremely fine resolution. Modeling and control are critical to achieve objectives for high-precision motion. However, piezo-actuated stages themselves suffer from the inherent drawbacks produced by the inherent creep and hysteresis nonlinearities and vibration caused by the lightly damped resonant dynamics, which make modeling and control of such systems challenging. To address these challenges, various techniques have been reported in the literature. This paper surveys and discusses the progresses of different modeling and control approaches for piezo-actuated nanopositioning stages and highlights new opportunities for the extended studies.

Modeling and Control of Piezo-Actuated Nanopositioning Stages: A Survey

The Prandtl-Ishlinskii (PI) model is widely utilized in hysteresis modeling and compensation of piezoelectric actuators For systems with rate-independent hysteresis, the inverse PI model is analytically feasible and it can be adopted as a feedforward compensator for the hysteretic nonlinearity of piezoelectric actuators However, for the rate-dependent PI model, the applicable valid inversion methodology is not yet available Although simply replacing all the rate-independent terms in the conventional inversion law with the rate-dependent terms can achieve acceptable results at very slow trajectories However, a large theoretical modeling error is inevitable at fast trajectories, which is investigated through simulations This paper proposes a new direct approach to derive the inverse PI model directly from experimental data As no inversion calculation is involved, the proposed direct approach is efficient and the theoretical modeling error can be avoided In order to validate the accuracy of the direct approach, a number of experiments have been implemented on a piezo-driven compliant mechanism by utilizing the inverse PI model as a feedforward controller The tracking performance of the mechanism is significantly improved by the direct approach

A Novel Direct Inverse Modeling Approach for Hysteresis Compensation of Piezoelectric Actuator in Feedforward Applications

A wide range of microcomponents can today be produced using various microfabrication techniques. The assembly of complex microsystems consisting of several single components (i.e., hybrid microsystems) is, however, a difficult task that is seen to be a real challenge for the robotic research community. It is necessary to conceive flexible, highly precise and fast microassembly methods. In this paper, the development of a microrobot-based microassembly station is presented. Mobile piezoelectric microrobots with dimensions of some cm^3 and with at least 5 DOF can perform various manipulations either under a light microscope or within the vacuum chamber of a scanning electron microscope. The components of the station developed and its control system are described. The latter comprises a vision-based sensor system for automatic robot control, user interfaces, a re-configurable parallel computer array and an assembly planning system. Specific problems that occur when using microrobots in an SEM and our research activities on the development of force microsensors integrated into the microrobots" grippers are described as well.

A Flexible Microrobot-Based Microassembly Station

From the Publisher:
Microsystem technology (MST) integrates very small (up to a few nanometers) mechanical, electrical, optical, and other components on a substrate to construct functional devices. These devices are used as intelligent sensors, actuators, and controllers for medical, automotive, household, and many other purposes. This is a basic introduction to MST. Well-illustrated, it is the first of its kind to cover MST in its entirety, including a survey of recently built products and recent developments.

Microsystem Technology and Microrobotics

In this paper, current research work on the development of an automated nano handling station in a scanning electron microscope (SEM) is presented. An experimental setup is described, in which two mobile microrobots cooperate in the vacuum chamber of an SEM. The robots are positioned by a closed-loop controller with sensor data, which is provided by three charge-coupled device cameras and the SEM. Continuous pose estimation is carried out by processing noisy SEM images in real time. To enable the automation of complex tasks, a client-server control system that can integrate various microrobots and sensors is introduced. Finally, the overall system is evaluated by automatic handling of transmission electron microscope lamellae.

Sergej Fatikow

Papers

Modeling and Control of Piezo-Actuated Nanopositioning Stages: A Survey

A Novel Direct Inverse Modeling Approach for Hysteresis Compensation of Piezoelectric Actuator in Feedforward Applications

A Flexible Microrobot-Based Microassembly Station

Microsystem Technology and Microrobotics

Microrobot System for Automatic Nanohandling Inside a Scanning Electron Microscope